DIN EN 60168 : 2001-12
Current
The latest, up-to-date edition.
TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV
Hardcopy
German
01-12-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Vorwort zur Änderung 1
Vorwort zur Änderung 2
Einleitung
1 Allgemeines
1.1 Anwendungsbereich und Zweck
1.2 Normative Verweisungen
1.3 Begriffe
2 Isolatoren
2.1 Isolatorbauarten und Isolierstoffe
2.2 Kennzeichnende Werte für einen Stützisolator
2.3 Kennzeichnung von Isolatoren
3 Einteilung der Prüfungen, Regeln und Verfahren für die
Stichprobenentnahme
3.1 Einteilung der Prüfungen
3.2 Qualitätssicherung
3.3 Allgemeine Anforderungen für Typprüfungen
3.4 Allgemeine Anforderungen für Stichprobenprüfungen
4 Prüfverfahren für elektrische Prüfungen
4.1 Allgemeine Anforderungen für Hochspannungsprüfungen
4.2 Atmosphärische Normbedingungen und Korrekturfaktoren
für elektrische Prüfungen
4.3 Parameter des künstlichen Regens für Regenprüfungen
4.4 Prüfaufbau für elektrische Prüfungen
4.5 Steh-Blitzstossspannungsprüfung, trocken - Typprüfung
4.6 Steh-Schaltstossspannungsprüfungen, trocken oder
unter Regen - Typprüfung
4.7 Steh-Wechselspannungsprüfung, trocken - Typprüfung
(nur anwendbar bei Stützisolatoren für die
Innenraumanwendung)
4.8 Steh-Wechselspannungsprüfung, unter Regen - Typprüfung
(nur anwendbar bei Stützisolatoren für die
Freiluftanwendung)
4.9 Durchschlagsprüfung - Stichprobenprüfung
4.10 Elektrische Stückprüfung
5 Prüfverfahren für mechanische und andere Prüfungen
5.1 Prüfung der Masse - Typ- und Stichprobenprüfung
5.2 Prüfung der mechanischen Bruchkraft - Typ- und
Stichprobenprüfung
5.3 Prüfung der Auslenkung unter Last - Sonderprüfung
5.4 Temperaturwechselprüfung - Stichprobenprüfung
5.5 Wärmeschock-Stückprüfung (nur anwendbar für
Isolierteile aus vorgespanntem Glas)
5.6 Porositätsprüfung - Stichprobenprüfung (nur anwendbar
für keramische Stützisolatoren)
5.7 Verzinkungsprüfung - Stichprobenprüfung
5.8 Sichtprüfung als Stückprüfung
5.9 Mechanische Stückprüfung
6 Prüfungen für Stützisolatoren
6.1 Typprüfungen
6.2 Stichprobenprüfungen
6.3 Stückprüfungen
6.4 Zusammenfassung der Prüfungen für Stützisolatoren
Bilder
Anhang A (informativ) Verfahren zur Prüfung der
Grenzabweichungen der Parallelität, der
Exzentrizität, der Winkelabweichung, der
Durchbiegung und des Schirmwinkels von
Stützisolatoren
Anhang B (informativ) Verfahren für die Stückprüfung von
unarmierten Isolierkörpern
Anhang C (informativ) Bibliographie
Anhang ZA (normativ) Normative Verweisungen auf internationale
Publikationen mit ihren entsprechenden
europäischen Publikationen
Applies to post insulators and post insulator units of ceramic material or glass, for indoor and outdoor use in electrical installations or equipment, operating on alternating current with a nominal voltage greater than 1000 V and a frequency not more than 100 Hz.
| DevelopmentNote |
Supersedes DIN IEC 36C-108-CDV. (01/2003)
|
| DocumentType |
Standard
|
| Pages |
0
|
| PublisherName |
Verband Deutscher Elektrotechniker
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 60168 : 95 AMD 2 2001 | Identical |
| IEC 60168:1994+AMD1:1997+AMD2:2000 CSV | Identical |
| NBN EN 60168 : 1995 AMD 2 2001 | Identical |
| I.S. EN 60168:1996 | Identical |
| SN EN 60168 : 1994 AMD 2 2000 | Identical |
| VDE 0674-1 : 2001-12 | Corresponds |
| BS EN 60168:1995 | Identical |
| EN 60168:1994/A2:2000 | Identical |
| UNE-EN 60168:1997 | Identical |
| VDE 0674-1 : 2001-12 | Identical |
| DIN EN 60660 : 2000 | INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV |
| VDE 0111-1 : 2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| VDE 0674-2 : 1984 | TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| EN 61264:1998/corrigendum:2000 | CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| EN 60672-1:1995 | Ceramic and glass insulating materials - Part 1: Definitions and classification |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| VDE 0674-6 : 1998 | RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS |
| IEC 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
| DIN VDE 0674-2 : 1984 | TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT |
| IEC 60660:1999 | Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| EN 60660:1999 | Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| DIN EN 60507 : 2014 | ARTIFICIAL POLLUTION TESTS ON HIGH-VOLTAGE CERAMIC AND GLASS INSULATORS TO BE USED ON A.C. SYSTEMS |
| VDE 0674-3 : 99 COR 1 1999 | CERAMIC PRESSURIZED HOLLOW INSULATORS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 61264:1998 | Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear |
| EN 60672-3:1997 | Ceramic and glass-insulating materials - Part 3: Specifications for individual materials |
| EN 60507:2014 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
| VDE 0335-1 : 1996 | CERAMIC AND GLASS INSULATING MATERIALS - DEFINITIONS AND CLASSIFICATION |
| EN ISO 1460:1994 | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992) |
| DIN EN ISO 1460:1995-01 | METALLIC COATINGS - HOT DIP GALVANIZED COATINGS ON FERROUS MATERIALS - GRAVIMETRIC DETERMINATION OF THE MASS PER UNIT AREA |
| HD 578 : 200S1 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| IEC 60437:1997 | Radio interference test on high-voltage insulators |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| DIN IEC 60233 : 1984 | TESTS ON HOLLOW INSULATORS FOR USE IN ELECTRICAL EQUIPMENT |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| VDE 0448-1 : 2014 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems (IEC 60507:2013); |
| EN 60437:1997 | Radio interference test on high-voltage insulators |
| DIN EN 60672-3 : 1999 | CERAMIC AND GLASS-INSULATING MATERIALS - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
| VDE 0335-3 : 1999 | CERAMIC AND GLASS-INSULATING MATERIALS - SPECIFICATIONS FOR INDIVIDUAL MATERIALS |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| EN 60071-1:2006/A1:2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| VDE 0432-1 : 2011 | HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| VDE 0674-4 : 1993 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| DIN EN 60071-1 : 2010 | INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| EN 60071-2:1997 | Insulation co-ordination - Part 2: Application guide |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| DIN EN ISO 9001:2015-11 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (ISO 9001:2015) |
| DIN EN 60437 : 1998 | RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| VDE 0111-2 : 1997 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| VDE 0441-3 : 2000-12 | INSULATORS - TESTS ON INDOOR POST INSULATORS OF ORGANIC MATERIAL FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV UP TO BUT NOT INCLUDING 300 KV |
| IEC 60507:2013 | Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| DIN IEC 60060-1 : 1994 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL SPECIFICATIONS AND TEST REQUIREMENTS |
| DIN ISO 9000:1990-05 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR SELECTION AND USE |
| DIN EN 60672-1 : 1996 | CERAMIC AND GLASS INSULATING MATERIALS - PART 1: DEFINITIONS AND CLASSIFICATION |
| DIN ISO 9004:1990-05 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - GUIDELINES |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| DIN IEC 60273 : 1993 | CHARACTERISTICS OF INDOOR AND OUTDOOR POST INSULATORS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1000 V |
| IEC 60672-1:1995 | Ceramic and glass insulating materials - Part 1: Definitions and classification |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| DIN EN 60071-2 : 1997 | INSULATION CO-ORDINATION - PART 2: APPLICATION GUIDE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.