DIN EN 60068-2-2 : 1995
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENVIRONMENTAL TESTING - PART 2-2: TESTS - TEST B: DRY HEAT
Hardcopy
25-11-2022
English
01-01-1995
Cooperating organizations
National foreword
Foreword
Relationship of suffixes between Tests A: Cold, and
Tests B: Dry heat
Introduction
Section one - Test Ba: Dry heat for non heat-dissipating
specimen with sudden change of temperature
1. Object
2. General description
3. Description of test apparatus
4. Severities
5. Preconditioning
6. Initial measurements
7. Conditioning
8. Intermediate measurements
9. Recovery
10. Final measurements
11. Information to be given in the relevant specification
Section two - Test Bb: Dry heat for non heat-dissipating
specimen with gradual change of temperature
12. Object
13. General description
14. Description of test apparatus
15. Severities
16. Preconditioning
17. Initial measurements
18. Conditioning
19. Intermediate measurements
20. Recovery
21. Final measurements
22. Information to be given in the relevant specification
Section three - Test Bc: Dry heat for heat-dissipating
specimen with sudden change of temperature
23. Object
24. General description
25. Description of test apparatus
26. Severities
27. Preconditioning
28. Initial measurements
29. Conditioning
30. Intermediate measurements
31. Recovery
32. Final measurements
33. Information to be given in the relevant specification
Section four - Test Bd: Dry heat for heat-dissipating
specimen with gradual change of temperature
34. Object
35. General description
36. Description of test apparatus
37. Severities
38. Preconditioning
39. Initial measurements
40. Conditioning
41. Intermediate measurements
42. Recovery
43. Final measurements
44. Information to be given in the relevant specification
Appendices
A. Volume of test specimen
B. Nomogram for correction for ambient temperature
C. Diagrammatic representation of test with forced
air circulation for Method A of Test Bd
D. Diagrammatic representation of test with forced
air circulation for Test Bc and for Method B of
Test Bd
ZA. (normative) Other international publications quoted
in this standard with the references of the relevant
European publications
National annex NA (informative) Committees responsible
National annex NB (informative) Cross-references
Deals with dry heat tests applicable both to heat-dissipating and non heat-dissipating specimens. For non heat-dissipating specimens, Tests Bb and Bd do not deviate essentially from earlier issues.
DevelopmentNote |
Supersedes DIN IEC 60068-2-2. (05/2002)
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
Verband Deutscher Elektrotechniker
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
IEC 60068-2-2a:1976 | Identical |
SN EN 60068-2-2 : 2007 | Identical |
VDE 0468-2-2 : 2008 | Corresponds |
NF EN 60068-2-2 : 2007 | Identical |
BS EN 60068-2-2:2007 | Identical |
I.S. EN 60068-2-2:2007 | Identical |
IEC 60068-2-2:2007 | Identical |
EN 60068-2-2:2007 | Identical |
UNE-EN 60068-2-2:2008 | Identical |
DIN EN 50173:2000-07 | INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS |
DIN EN ISO 4064-2:2017-10 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
DIN EN 60068-2-41:2000-08 | ENVIRONMENTAL TESTING - PART 2: TESTS; TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS |
DIN EN 60068-4:1996-10 | ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES |
VDE 0468-2-69 : 2018 | ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017) |
VDE 0160 : 1998-04 | ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
KTA 3505 : 2015(R2017) | TYPE TESTING OF MEASURING SENSORS AND TRANSDUCERS OF THE INSTRUMENTATION AND CONTROL SYSTEM IMPORTANT TO SAFETY |
VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
VDE 0557-1 : 2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, DC OUTPUT - PERFORMANCE CHARACTERISTICS AND SAFETY REQUIREMENTS |
VDE 0551 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
DIN EN 60938-1 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
VDI/VDE 5570 Blatt 3:2017-06 | Testing of connectorised and non-connectorised polymer optical fibres (POF) - Testing of mechanical characteristics, environmental influences and aging behaviour |
VDE 0830-8-10 : 1998 | ALARM SYSTEMS - ACCESS CONTROL SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS |
VDE 0435-140 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING ELECTRICAL RELAYS - INSULATION COORDINATION |
DIN EN 60742 : 1995 | ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS |
DIN IEC 60679-2:1997-09 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS - PART 2: GUIDE TO THE USE OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS |
DIN EN 60068-2-51:2000-08 | ENVIRONMENTAL TESTING - PART 2: TESTS; TESTS Z/BFC: COMBINED DRY HEAT/VIBRATION (SINUSOIDAL) TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS |
DIN EN ISO 4064-2:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 2: TEST METHODS (ISO 4064-2:2014) |
DIN EN 165000-1:1996-11 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION - CAPABILITY APPROVAL PROCEDURE |
DIN EN 144000:1995-09 | GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS |
VDS 2100-21 : 2008 | CONTROLLERS FOR ELECTRIC MOTORS, REQUIREMENTS AND TEST METHODS |
VDE 0882 : 1996 | SAFETY REQUIREMENTS FOR ELECTRONIC FLASH APPARATUS FOR PHOTOGRAPHIC PURPOSES |
DIN EN 61268 : 1996 | ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
DIN V ENV 50091-3 : 2000 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: PERFORMANCE REQUIREMENTS |
DIN EN 60068-2-69 : 2007 | ENVIRONMENTAL TESTING - PART 2-69: TESTS - TEST TE/TC: SOLDERABILITY TESTING OF ELECTRONIC COMPONENTS AND PRINTED BOARDS BY THE WETTING BALANCE (FORCE MEASUREMENT) METHOD (IEC 60068-2-69:2017) |
DIN EN 175200:1996-11 | SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS |
DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
DIN EN 61810-5 : 1999 | ELECTROMECHANICAL NON-SPECIFIED TIME ALL-OR-NOTHING RELAYS - PART 5: INSULATION COORDINATION |
DIN VDE 0110-1 : 1997 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.