DIN EN 469:2007-02
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING
Available format(s)
Hardcopy , PDF
Superseded date
07-03-2021
Language(s)
English
Published date
01-01-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General clothing design
5 Sampling and pre-treatment
6 Physical requirements
7 Marking
8 Information supplied by the manufacturer
Annex A (normative) - Uncertainty of
measurement
Annex B (normative) - Determination of
performance and rating classification
Annex C (normative) - Significant technical changes
between this document and the previous
edition EN 469:2005
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
Defines minimum levels of performance requirements for protective clothing against heat and fire designed to be worn during firefighting operations, except protective clothing that is worn during fighting wildland fires (EN 15614) or specialized firefighting (EN 1486).
| DevelopmentNote |
2014 Edition issued in September 2014 has been declared withdrawn by publisher on 01/04/2016. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NEN EN 469 : 2006 AMD 1 2006 | Identical |
| UNE-EN 469:2006 | Identical |
| BS EN 469:2014 | Identical |
| SN EN 469 : 2006 | Identical |
| NF EN 469 : 2014 | Identical |
| NS EN 469 : 2005 AMD 1 2006 | Identical |
| NBN EN 469 : 2014 | Identical |
| UNI EN 469 : 2014 | Identical |
| I.S. EN 469:2014 | Identical |
| ONORM EN 469 : 2007 | Identical |
| EN 15614:2007 | Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing |
| EN 943-1:2015 | Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN 943-2:2002 | Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 13921:2007 | Personal protective equipment - Ergonomic principles |
| ISO 12894:2001 | Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments |
| ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
| EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| ISO 6530:2005 | Protective clothing — Protection against liquid chemicals — Test method for resistance of materials to penetration by liquids |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| CEN/TR 14560:2003 | Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
| ISO 11612:2015 | Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements |
| ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
| ISO 13688:2013 | Protective clothing — General requirements |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| EN 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| IEC 61482-1-2:2014 | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2: Test methods - Method 2: Determination of arc protection class of material and clothing by using a constrained and directed arc (box test) |
| EN ISO 4920:2012 | Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) |
| EN ISO 13998:2003 | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| EN ISO 11612:2015 | Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO 11612:2015) |
| EN ISO 11611:2015 | Protective clothing for use in welding and allied processes (ISO 11611:2015) |
| ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
| EN ISO 5077:2008 | Textiles - Determination of dimensional change in washing and drying (ISO 5077:2007) |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| ISO 13998:2003 | Protective clothing Aprons, trousers and vests protecting against cuts and stabs by hand knives |
| ISO 15384:2003 | Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| ISO 11611:2015 | Protective clothing for use in welding and allied processes |
| EN ISO 6530:2005 | Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) |
| ISO 14460:1999 | Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods |
| ISO 20471:2013 | High visibility clothing — Test methods and requirements |
| ISO 7933:2004 | Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain |
| EN 13911:2017 | Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters |
| EN ISO 7933:2004 | Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| EN 137:2006 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
| ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| EN ISO 12894:2001 | Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001) |
| EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| ISO 9886:2004 | Ergonomics Evaluation of thermal strain by physiological measurements |
| EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
| EN ISO 9886:2004 | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
| ISO 13506:2008 | Protective clothing against heat and flame Test method for complete garments Prediction of burn injury using an instrumented manikin |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
| ISO 11613:1999 | Protective clothing for firefighters Laboratory test methods and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.