DIN EN 23270:1991-09
Current
Current
The latest, up-to-date edition.
PAINTS, VARNISHES AND THEIR RAW MATERIALS; TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-01-1991
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Cooperating organizations
National foreword
Foreword
Text of EN 23270
Specification
0 Introduction
1 Scope and field of application
2 Reference
3 Definitions
4 Temperatures and humidities for conditioning and
testing
5 Conditioning
6 Testing
National appendix NA (informative)
This standard is included in DIN Handbook 157 and 201. Sets conditions of temperature and relative humidity for use in the conditioning and testing of paints and varnishes and their raw materials. Applicable to paints and varnishes in liquid or power form, to wet or dry films, and their raw materials.
| DevelopmentNote |
Supersedes VDA 621-417. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 23270 : 1991 | Identical |
| ISO 3270:1984 | Identical |
| NBN EN 23270 : 1992 | Identical |
| I.S. EN 23270:1992 | Identical |
| SNV NF EN 23270 : 1991 | Identical |
| SNV DIN EN 23270 : 1991 | Identical |
| UNI EN 23270 : 1992 | Identical |
| BS EN 23270:1991 | Identical |
| EN 23270:1991 | Identical |
| UNE-EN 23270:1993 | Identical |
| DIN EN ISO 9117-2:2010-07 | Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) |
| DIN 53781:2016-03 | PAINTS AND VARNISHES - METHODS FOR TESTING THE RESISTANCE OF COATINGS TO IONIZING RADIATION IN NUCLEAR PLANTS |
| DIN HDBK 201 : 8ED 2017 | ROHSTOFFE FUER BESCHICHTUNGSSTOFFE 2 - BINDEMITTEL, LOESEMITTEL UND WEICHMACHER - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN |
| DIN 53150:2002-09 | PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD) |
| DIN EN ISO 28199-1:2010-01 | Paints and varnishes - Evaluation of properties of coating systems related to the application process - Part 1: Relevant vocabulary and preparation of test panels (ISO 28199-1:2009) |
| DIN 55657:2016-08 | Paints and varnishes - Test method for evaluation of elastic adhesives on coatings by peel test, peel strength test and tensile lap-shear strength test with additional stress by condensation test or cataplasm storage |
| DIN EN ISO 6272-2:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) |
| DIN EN ISO 15234:2011-02 | Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999) |
| DIN EN ISO 2812-3:2012-10 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 3: METHOD USING AN ABSORBENT MEDIUM (ISO 2812-3:2012) |
| DIN EN ISO 6272-1:2011-11 | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) |
| DIN EN ISO 14577-4:2015-05 (Draft) | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 4: TEST METHOD FOR METALLIC AND NON-METALLIC COATINGS (ISO 14577-4:2016) |
| DIN EN ISO 1520:2007-11 | PAINTS AND VARNISHES - CUPPING TEST |
| DIN EN ISO 20567-2:2007-01 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 2: SINGLE-IMPACT TEST WITH A GUIDED IMPACT BODY (ISO 20567-2:2017) |
| DIN EN ISO 7783-1:1999-06 | PAINTS AND VARNISHES - DETERMINATION OF WATER-VAPOUR TRANSMISSION RATE - PART 1: DISH METHOD FOR FREE FILMS |
| DIN EN ISO 20567-3:2013-04 | PAINTS AND VARNISHES - DETERMINATION OF STONE-CHIP RESISTANCE OF COATINGS - PART 3: SINGLE-IMPACT TEST WITH A FREE-FLYING IMPACT BODY (ISO 20567-3:2012) |
| DIN EN ISO 16474-1:2014-03 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 16474-1:2013) |
| DIN EN ISO 2812-5:2007-05 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO LIQUIDS - PART 5: TEMPERATURE-GRADIENT OVEN METHOD |
| DIN EN ISO 8130-13:2011-02 | COATING POWDERS - PART 13: PARTICLE SIZE ANALYSIS BY LASER DIFFRACTION |
| DIN EN ISO 6860:2006-06 | Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) |
| DIN EN ISO 16862:2006-08 | Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN ISO 4628-8:2013-03 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 8: ASSESSMENT OF DEGREE OF DELAMINATION AND CORROSION AROUND A SCRIBE OR OTHER ARTIFICIAL DEFECT (ISO 4628-8:2012) |
| DIN EN ISO 11890-1:2007-09 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
| DIN EN ISO 1519:2011-04 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| DIN EN ISO 7253:2002-04 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG) |
| DIN 55945:2016-08 | PAINTS AND VARNISHES - ADDITIONAL TERMS AND DEFINITIONS TO DIN EN ISO 4618 |
| DIN 53152:1993-05 | PAINTS AND VARNISHES; BEND TEST AN COATINGS; METHOD USING CYLINDRICAL MANDREL |
| DIN EN ISO 9117-5:2012-11 | Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) |
| DIN EN ISO 9117-4:2012-11 | Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) |
| DIN 55660-2:2011-12 | PAINTS AND VARNISHES - WETTABILITY - PART 2: DETERMINATION OF THE FREE SURFACE ENERGY OF SOLID SURFACES BY MEASURING THE CONTACT ANGLE |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| DIN EN ISO 17463:2014-11 | Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014) |
| DIN 53170:2009-08 | SOLVENTS FOR PAINTS AND VARNISHES - DETERMINATION OF THE EVAPORATION RATE |
| DIN HDBK 157 : 2012 | FARBMITTEL 2 - PIGMENTE, FUELLSTOFFE, FARBSTOFFE - DIN-EN-, DIN-EN-ISO- UND DIN-ISO-NORMEN |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.