DIN EN 1948-4:2014-03
Current
The latest, up-to-date edition.
STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
Hardcopy , PDF
German, English
01-03-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle of the measurement procedure
6 Device, materials and [13]C[12]-labelled
standards
7 Safety measures
8 Measurement procedure
9 Method validation
10 Quality control requirements for the
measurement
11 Quality assurance criteria for
extraction/clean-up/quantification procedure
blanks
12 Performance characteristics
13 Interferences (informative)
Annex A (informative) - Toxicity and toxic equivalency
Annex B (informative) - Examples of extraction and
clean-up procedures
Annex C (informative) - Evaluation of the performance
characteristics
Annex D (informative) - Recommendations for measuring
high concentrations of dioxin-like PCBs
Annex E (informative) - Possible interferences in
dioxin-like PCB analysis
Annex F (informative) - Measurement of the marker
PCBs 28, 52, 101, 138, 153, and 180 in addition
to the 12 dioxin-like PCBs
Annex G (informative) - Measurement of hexachlorobenzene
(HCB)
Annex H (informative) - Significant technical changes
Annex ZA (informative) - Relationship between this
European Standard and the essential requirements
of EU Directives
Bibliography
Describes sampling from stationary sources, extraction, clean-up, identification and quantification procedures of the dioxin-like PCBs.
| Committee |
TC 264
|
| DevelopmentNote |
Supersedes DIN CEN/TS 1948-4. (12/2010)
|
| DocumentType |
Standard
|
| Pages |
67
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 1948-4:2010+A1:2013 | Identical |
| PREN 1948-4 : DRAFT 2009 | Identical |
| VDI 3890:2016-03 | Emission control - Pet cremation facilities |
| VDI 3927 Blatt 2:2015-05 | Waste gas cleaning - Reduction of inorganic and organic trace species in combustion flue gases |
| VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
| VDI 2576:2010-01 | Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal |
| VDI 2578:2017-05 | Emission control - Glassworks |
| VDI 2102 Blatt 2:2013-04 | Emission control - Copper and copper alloy melting plants |
| ISO 4793:1980 | Laboratory sintered (fritted) filters — Porosity grading, classification and designation |
| EN 12766-1:2000 | Petroleum products and used oils - Determination of PCBs and related products - Part 1: Separation and determination of selected PCB congeners by gas chromatography (GC) using an electron capture detector (ECD) |
| VDI 2310 Blatt 32:1995-11 | Maximum immission values - Maximum immission values for PCBs to protect farm animals |
| EN 1948-2:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs |
| EN ISO 9169:2006 | Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) |
| VDI 3498 Blatt 2:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using small filters |
| EN ISO 16000-12:2008 | Indoor air - Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) (ISO 16000-12:2008) |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN 1948-1:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs |
| EN 1948-3:2006 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs |
| VDI 2464 Blatt 3:2012-07 | Ambient air measurement - Indoor air measurement - Measurement of polybrominated diphenylether, hexabromocyclododecane and hexabromobenzene by GC/MS |
| EN 12766-2:2001 | Petroleum products and used oils - Determination of PCBs and related products - Part 2: Calculation of polychlorinated biphenyl (PCB) content |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 16000-12:2008 | Indoor air Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs) |
| ISO 9169:2006 | Air quality Definition and determination of performance characteristics of an automatic measuring system |
| VDI 3498 Blatt 1:2002-07 | Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.