DIN EN 16192:2012-02
Current
Current
The latest, up-to-date edition.
Characterization of waste - Analysis of eluates
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-02-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.| DevelopmentNote |
Supersedes DIN EN 12506 and DIN EN 13370. (02/2012) DRAFT 2018 issued in April 2018. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 16192:2011 | Identical |
| PREN 16192 : DRAFT 2010 | Identical |
| DIN EN 16123:2013-05 | Characterization of waste - Guidance on selection and application of screening methods |
| ISO 23913:2006 | Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
| EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
| ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
| EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
| EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
| DIN 38405-4:1985-07 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; ANIONS (GROUP D); DETERMINATION OF FLUORIDE (D 4) |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| CEN/TS 14429:2005 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition |
| EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
| ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
| DIN 38406-21:1980-09 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E), DETERMINATION OF NINE HEAVY METALS (AG, BI, CD, CO, CU, NI, PB, TL, ZN) (E 21) |
| EN ISO 10304-3:1997 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
| EN ISO 11732:2005 | Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005) |
| EN ISO 15586:2003 | Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003) |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| ISO/TR 13530:1997 | Water quality Guide to analytical quality control for water analysis |
| EN 26777:1993 | Water quality - Determination of nitrite - Molecular absorption spectrometric method (ISO 6777:1984) |
| EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
| ISO 10304-3:1997 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
| ISO 11732:2005 | Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection |
| DIN ISO 5725-3:2003-02 | Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method (ISO 5725-3:1994 including Technical Corrigendum 1:2001) |
| ISO 15682:2000 | Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
| ISO 17852:2006 | Water quality Determination of mercury Method using atomic fluorescence spectrometry |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| CEN/TS 14997:2006 | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with continuous pH-control |
| ISO 9965:1993 | Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
| ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 9297:1989 | Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method) |
| ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
| EN ISO 17852:2008 | Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006) |
| EN ISO 23913:2009 | Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006) |
| ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
| ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
| ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
| ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
| ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
| CEN/TR 16184:2011 | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| ENV ISO 13530:1998 | Water quality - Guide to analytical quality control for water analysis (ISO/TR 13530:1997) |
| EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
| DIN 38409-16:1984-06 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; GENERAL MEASURES OF EFFECTS AND SUBSTANCES (GROUP H); DETERMINATION OF THE PHENOL INDEX (H 16) |
| ISO 15586:2003 | Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace |
| NEN 6604 : 2007 | WATER QUALITY - DETERMINATION OF AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHO-PHOSPHATE, SULPHATE AND SILICATE BY A DISCRETE ANALYZER SYSTEM AND SPECTROPHOTOMETRIC DETECTION |
| ISO 7888:1985 | Water quality — Determination of electrical conductivity |
| EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN ISO 5725-5:2002-11 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
| ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
| ISO 22743:2006 | Water quality Determination of sulfates Method by continuous flow analysis (CFA) |
| EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN ISO 15682:2001 | Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
| EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
| DIN ISO 5725-4:2003-01 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
| ISO 10523:2008 | Water quality — Determination of pH |
| EN 15216:2007 | Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates |
| DIN 38405-13:2011-04 | German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 13: Determination of cyanides (D 13) |
| EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
| DIN 38405-1:1985-12 | German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1) |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
| EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
| ISO 17294-2:2016 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes |
| EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
| EN ISO 17294-2:2016 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016) |
| ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
| EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.