DIN EN 14944-1:2015-06 (Draft)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF FACTORY MADE CEMENTITIOUS PRODUCTS ON ORGANOLEPTIC PARAMETERS
Hardcopy , PDF
07-03-2021
German
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
6 Apparatus
7 Samples and test pieces
8 Pre-treatment of samples (curing, preconditioning and
disinfection)
9 Test procedure
10 Determination of odour as TON and flavour as TFN
11 Determination of colour and turbidity
12 Expression of results
13 Test report
Annex A (normative) Additional procedures for testing
factory made pipes (cement mortar lined
and concrete)
Annex B (normative) Additional procedures for testing
factory made fittings (cement mortar
lined and concrete)
Annex C (normative) Additional procedures for testing
factory made storage systems (cement
mortar, cement mortar lined and
concrete)
Annex D (informative) Examples of typical test pieces
and test conditions as a function of
S/V ratio
Annex E (informative) Test arrangements for testing factory
made cementitious products
Annex F (normative) Additional procedures for testing
factory made cementitious products at
elevated temperature
Annex G (informative) Discrimination between porous and
non-porous coatings on factory made
products
Annex H (informative) Schematic description of the test
procedure
Bibliography
Specifies a method to determine the influence of factory made cementitious products on the odour, flavour, colour and turbidity of test waters after contact with the products.
| DevelopmentNote |
DRAFT 2015 issued in June 2015 is now cancelled. (05/2017)
|
| DocumentType |
Draft
|
| Pages |
109
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| NF EN 14944-1 : 2006 | Identical |
| UNE-EN 14944-1:2007 | Identical |
| NBN EN 14944-1 : 2006 | Identical |
| NEN EN 14944-1 : 2006 | Identical |
| NS EN 14944-1 : 1ED 2006 | Identical |
| I.S. EN 14944-1:2006 | Identical |
| SN EN 14944-1 : 2006 | Identical |
| UNI EN 14944-1 : 2006 | Identical |
| BS EN 14944-1:2006 | Identical |
| EN 14944-1:2006 | Identical |
| ONORM EN 14944-1 : 2006 | Identical |
| ISO 6058:1984 | Water quality — Determination of calcium content — EDTA titrimetric method |
| EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| EN ISO 7393-1:2000 | Water quality - Determination of free chlorine and total chlorine - Part 1: Titrimetric method using N, N-diethyl-1,4-phenylenediamine (ISO 7393-1:1985) |
| ISO 16264:2002 | Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection |
| ISO 16132:2016 | Ductile iron pipes and fittings — Seal coats for cement mortar linings |
| EN ISO 7027:1999 | Water quality - Determination of turbidity (ISO 7027:1999) |
| EN 1015-11 : 1999 AMD 1 2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| EN ISO 16264:2004 | Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002) |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| EN 1622:2006 | Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN) |
| ISO 9963-2:1994 | Water quality Determination of alkalinity Part 2: Determination of carbonate alkalinity |
| EN 12390-1:2012 | Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds |
| ISO 7888:1985 | Water quality — Determination of electrical conductivity |
| ISO 7887:2011 | Water quality — Examination and determination of colour |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| EN ISO 7887:2011 | Water quality - Examination and determination of colour (ISO 7887:2011) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| EN ISO 9963-2:1995 | Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity (ISO 9963-2:1994) |
| ISO 7393-2:1985 | Water quality Determination of free chlorine and total chlorine Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine control purposes |
| ISO 10523:2008 | Water quality — Determination of pH |
| ISO 5492:2008 | Sensory analysis — Vocabulary |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 7027:1999 | Water quality Determination of turbidity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.