DIN EN 14902:2005-10
Current
The latest, up-to-date edition.
AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB, CD, AS AND NI IN THE PM10 FRACTION OF SUSPENDED PARTICULATE MATTER
Hardcopy , PDF
01-01-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Principle
5 Requirements
6 Reagents and gases
7 Apparatus
8 Sampling
9 Analysis
10 Quality control
11 Calculation of results
12 Estimation of the measurement uncertainty of the method
13 Performance characteristics determined in field tests
14 Reporting of results
Annex A (informative) Examples of closed vessel microwave
digestion procedures
Annex B (informative) Typical laboratory filter blank values
as determined in the field validation
tests
Annex C (informative) Analytical interferences
Annex D (informative) Approach to uncertainty estimation used
in the field validation tests
Annex E (normative) List of minimum QA/QC procedures
Annex F (informative) Procedure for the determination of the
uncertainty of the method for an
individual laboratory
Annex ZA (informative) Relationship with EU Directives
Bibliography
Describes a method for the determination of particulate lead (Pb), cadmium (Cd), arsenic (As) and nickel (Ni) in ambient air that can be used in the framework of the European Council Directive on Ambient Air Quality Assessment and Management and the 1st and 4th Daughter Directives.
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| NS EN 14902 : 2005 AC 2007 | Identical |
| NF EN 14902 : 2005 | Identical |
| I.S. EN 14902:2005 | Identical |
| UNE-EN 14902:2006 | Identical |
| BS EN 14902:2005 | Identical |
| NEN EN 14902 : 2005 C1 2006 | Identical |
| NBN EN 14902 : 2005 COR 2006 | Identical |
| SN EN 14902 : 2005 CORR 2006 | Identical |
| UNI EN 14902 : 2005 | Identical |
| VDI 2267 Blatt 1:2012-10 | Determination of suspended matter in ambient air - Measurement of the element concentration after sampling on filters - Determination of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn by graphite furnace atomic absorption spectrometry (GF-AAS), by optical emission spectrometry with inductively coupled plasma (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) |
| VDI 2267 Blatt 12:2008-10 | Determination of suspended matter in ambient air - Measurement of As, Ca, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb and Zn by energy dispersive X-ray fluorescense (ED XRF) |
| VDI 2463 Blatt 7:2014-05 | Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS) |
| VDI 2267 Blatt 3:2015-03 | Determination of suspended matter in ambient air - Digestion variants for dust samples for the subsequent determination of the mass concentration of Al, Sb, As, Pb, Cd, Ca, Cr, Co, Fe, K, Cu, Mg, Mn, Na, Ni, Se, V and Zn |
| DIN EN 12341:2014-08 | Ambient air - Standard gravimetric measurement method for the determination of the PM or PM mass concentration of suspended particulate matter |
| DIN EN 16450:2015-10 (Draft) | AMBIENT AIR - AUTOMATED MEASURING SYSTEMS FOR THE MEASUREMENT OF THE CONCENTRATION OF PARTICULATE MATTER (PM10; PM2,5) |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| EN 13274-7:2008 | Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration |
| NFT 90 210 : 2009 | WATER QUALITY - PROTOCOL FOR THE INITIAL METHOD PERFORMANCE ASSESSMENT IN A LABORATORY |
| VDI 2449 Blatt 1:1995-02 | Measurement methods test criteria - Determination of performance characteristics for the measurement of gaseous pollutants (immission) |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| VDI 2267 Blatt 5:1997-11 | Determination of suspended matter in ambient air - Determination of the mass concentration of Be, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sb, V, Zn by optical emission spectrometry (ICP-OES) after sampling on filters and digestion in an oxidising agent |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| DIN 32645:2008-11 | CHEMICAL ANALYSIS - DECISION LIMIT, DETECTION LIMIT AND DETERMINATION LIMIT UNDER REPEATABILITY CONDITIONS - TERMS, METHODS, EVALUATION |
| VDI 2267 Blatt 11:1986-01 | Determination of suspended particulates in ambient air; measurement of the mass concentration of lead by energy dispersive X-ray fluorescence-analysis |
| VDI 2267 Blatt 15:2005-11 | Determination of suspended matter in ambient air - Measurement of the mass concentration of Al, As, Ca, Cd, Co, Cr, Cu, K, Mn, Ni, Pb, Sb, V, Zn as part of dust precipitation by mass spectrometry (ICP-MS) |
| VDI 2267 Blatt 7:1988-11 | Chemical analysis of particulates in ambient air; determination of thallium and its inorganic compounds as part of the dust precipitation by atomic absorption spectrometry |
| ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
| VDI 2267 Blatt 9:2002-07 | Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique |
| VDI 2267 Blatt 4:1987-03 | Chemical analysis of particulates in ambient air; determination of lead, cadmium and their inorganic compounds as part of the dust precipitation by atomic absorption spectrometry |
| DIN ISO 5725-4:2003-01 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD |
| ISO 6955:1982 | Analytical spectroscopic methods Flame emission, atomic absorption, and atomic fluorescence Vocabulary |
| VDI 2267 Blatt 1:2012-10 | Determination of suspended matter in ambient air - Measurement of the element concentration after sampling on filters - Determination of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn by graphite furnace atomic absorption spectrometry (GF-AAS), by optical emission spectrometry with inductively coupled plasma (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) |
| CR 14377:2002 | Air quality - Approach to uncertainty estimation for ambient air reference measurement methods |
| EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| VDI 2267 Blatt 14:2003-12 | Determination of suspended matter in ambient air - Measurement of Al, As, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn as part of dust deposition by optical emission spectrometry (ICP OES) |
| VDI 2267 Blatt 2:1983-02 | Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.