DIN EN 14492-2:2016-08 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
Hardcopy , PDF
07-03-2021
German
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder Schutzmassnahmen
5.1 Allgemeines
5.2 Einrichtungen
5.3 Kupplungen
5.4 Bremsen für Hub- und Senkbewegungen
5.5 Getriebe
5.6 Lasthaken
5.7 Seiltriebe
5.8 Kettentriebe
5.9 Bandtriebe
5.10 Pneumatische Ausrüstung
5.11 Hydraulische Ausrüstung
5.12 Fahrwerke
5.13 Elektrische Ausrüstung von Hubwerken und
ihren Fahrwerken
5.14 Geräuschreduzierung durch Konstruktion
5.15 Hubwerke für den Einsatz in explosionsfähigen
Atmosphären
6 Feststellung der Übereinstimmung mit den
Sicherheitsanforderungen und/oder Schutzmassnahmen
6.1 Seriengefertigte Hubwerke
6.2 Einzelgefertigte Hubwerke
7 Benutzerinformationen
7.1 Allgemeines
7.2 Besondere Anforderungen
7.3 Kennzeichnung
Anhang A (informativ) Beispiele für kraftgetriebene
Hubwerke
A.1 Seilzug
A.2 Kettenzug
A.3 Bandzug
A.4 Offenes Hubwerk
A.5 Bauaufzüge für nicht geführte Lasten - NGL
Building hoists - Treuil potence de chantier
Anhang B (normativ) Zusätzliche Anforderungen beim
Transport feuerflüssiger Massen
Anhang C (informativ) Zusätzliche Anforderungen für
Hubwerke für den Einsatz in
explosionsfähigen Atmosphären
Anhang D (informativ) Zusätzliche Anforderungen für den
Einsatz in aggressiver Umgebung und im Freien
Anhang E (informativ) Zusätzliche Anforderungen bei
Tieftemperatur-Einsatz
Anhang F (normativ) Tragkonstruktionen für Bauaufzüge für
nicht geführte Lasten
Anhang G (normativ) Kraftgetriebene Serienhubwerke -
Prüfverfahren für die Überprüfung der
Klassifizierung
Anhang H (informativ) Dokumente für Haken
Anhang I (informativ) Werte von [phi][IAL], [phi][DAL][L]
für verschiedene Typen von Überlastsicherungen
Anhang J (normativ) Motorauswahl
Anhang K (normativ) Lärmprüfung
Anhang L (informativ) Auswahl von für eine bestimmte
Anwendung geeigneten Normen für Krane
Anhang ZA (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden Anforderungen
der EG-Richtlinie 94/9/EG
Literaturhinweise
Applies to the design, information for use, maintenance and testing of power driven hoists with or without trolleys for which the prime mover is an electric, hydraulic or pneumatic motor.
| DevelopmentNote |
DRAFT 2016 issued in August 2016. (08/2016)
|
| DocumentType |
Draft
|
| Pages |
257
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| ONORM EN 14492-2 : JUN 2010 | Identical |
| NBN EN 14492-2 : 2007 COR 2010 | Identical |
| NEN EN 14492-2 : 2006 + A1/C1 2010 | Identical |
| NS EN 14492-2 : 2006 AC 2010 | Identical |
| I.S. EN 14492-2:2006 | Identical |
| UNI EN 14492-2 : 2009 | Identical |
| UNE-EN 14492-2:2008 | Identical |
| BS EN 14492-2 : 2006 | Identical |
| NF EN 14492-2 : 2007 + A1 2009 | Identical |
| VDI 3572:2017-08 | Energy and data transmission systems for cranes |
| VDI 4467:2014-12 | Tandem operation of cranes/trolleys |
| VDI 2381 Blatt 1:2009-07 | Final inspection of stationary and track-bound cranes - Instructionals form for experts |
| VDI 3570:2013-08 | Overload safeguards for cranes |
| VDI 4449:2009-04 | Guidance on the modification of crane systems |
| VDI 4412:2016-05 | Cableless control of cranes |
| DGUV GRUNDSATZ 315-390 : 2009 | GRUNDSAETZE FUER DIE PRUEFUNG VON SICHERHEITSTECHNISCHEN UND MASCHINENTECHNISCHEN EINRICHTUNGEN IN VERANSTALTUNGS- UND PRODUKTIONSSTAETTEN FUER SZENISCHE DARSTELLUNG |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 4308-1:2003 | Cranes and lifting appliances Selection of wire ropes Part 1: General |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| EN 13557:2003+A2:2008 | Cranes - Controls and control stations |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 12644-2:2000+A1:2008 | Cranes - Information for use and testing - Part 2: Marking |
| EN 60079-1:2014 | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| ISO 9224:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 13135-2:2004+A1:2010 | Cranes - Equipment - Part 2: Non-electrotechnical equipment |
| IEC 60079-18:2014 RLV | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| PREN 15011 : DRAFT 2017 | CRANES - BRIDGE AND GANTRY CRANES |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| UNI 9465 : 1989 | LIFTING HOOKS FOR LIFTING APPLIANCES - MECHANICAL PROPERTIES, LOAD CAPACITIES, STRESSES AND MATERIALS |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| ISO 9225:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| IEC 60072-1:1991 | Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| EN 13411-7:2006+A1:2008 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 13001-2:2014 | Crane safety - General design - Part 2: Load actions |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 13001-1:2015 | Cranes - General design - Part 1: General principles and requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 13411-4:2011 | Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing |
| EN 13411-6:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket |
| EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| IEC 61000-6-4:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| ISO 8407:2009 | Corrosion of metals and alloys Removal of corrosion products from corrosion test specimens |
| DIN 15400:1990-06 | LIFTING HOOKS - MATERIALS, MECHANICAL PROPERTIES, LIFTING CAPACITY AND STRESSES |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
| EN 13463-5:2011 | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
| ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| EN ISO 8565:2011 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 60034-5:2001/A1:2007 | ROTATING ELECTRICAL MACHINES - PART 5: DEGREES OF PROTECTION PROVIDED BY THE INTEGRAL DESIGN OF ROTATING ELECTRICAL MACHINES (IP CODE) - CLASSIFICATION |
| EN 60079-2:2014/AC:2015 | EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.