DIN EN 13566-2:2006-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES
Hardcopy , PDF
07-03-2021
English
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and
abbreviations
3.1 Terms and definitions
3.2 Symbols and abbreviations
4 Pipes at the 'M' stage
4.1 Materials
4.2 General characteristics
4.3 Material characteristics
4.4 Geometrical characteristics
4.5 Mechanical characteristics
4.6 Physical characteristics
4.7 Jointing
4.8 Marking
5 Fittings at the 'M' stage
5.1 Requirement for fittings
5.2 Marking
6 Ancillary components
7 Fitness for purpose of the system for pipes and
fittings at the 'I' stage
8 Installation practice
8.1 Preparatory work
8.2 Storage, handling and transport
8.3 Equipment
8.4 Installation
8.5 Process-related inspection and testing
8.6 Lining termination
8.7 Reconnecting to existing manholes and laterals
8.8 Final inspection and testing
Annex A (informative) Recommended scheme for assessment
of conformity
Annex B (normative) Structured-wall pipes used for
continuous pipe lining - Specification
of layers
Annex C (normative) Structured-wall pipes used for continuous
pipe lining - Determination of residual
elongation and leaktightness following
application and removal of a specified
longitudinal pulling force
Annex D (normative) Structured-wall pipes used for continuous
pipe lining - Determination of resistance
to application of a specified temporary
longitudinal bending radius
Bibliography
This standard is included in DIN Handbook 152 and 13-4. Defines requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of non-pressure drainage and sewerage networks.
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 13566-2 : 2006 | Identical |
| NEN EN 13566-2 : 2005 | Identical |
| BS EN 13566-2:2005 | Identical |
| I.S. EN 13566-2:2005 | Identical |
| UNI EN 13566-2 : 2006 | Identical |
| SN EN 13566-2 : 2006 | Identical |
| NS EN 13566-2 : 1ED 2006 | Identical |
| EN 13566-2:2005 | Identical |
| NF EN 13566-2 : 2006 | Identical |
| UNE-EN 13566-2:2006 | Identical |
| DIN HDBK 152 : 8ED 2009 | ABWASSERTECHNIK 4 - ABWASSERKANAELE UND ERDVERLEGTE ABWASSERLEITUNGEN - PLANUNG, VERLEGUNG, BETRIEB, SANIERUNG |
| EN 1277:2003 | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN ISO 9967:2016 | Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016) |
| EN 728:1997 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| ENV 1852-2 : DRAFT APR 2000 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 13566-1:2002 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO/TR 11295:1992 | Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings |
| ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| EN 921:1994/AC:1995 | PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE |
| EN 13689 : 2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| PREN 13476-1 : DRAFT 2015 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 12666-1:2005+A1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 9969:2016 | Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016) |
| EN 744:1995 | Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
| EN 1401-1:2009 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| ISO 9967:2016 | Thermoplastics pipes Determination of creep ratio |
| ISO 6259-3:2015 | Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes |
| EN ISO 1133:2005 | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) |
| ISO 9969:2016 | Thermoplastics pipes Determination of ring stiffness |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| EN 1446 : 1996 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RING FLEXIBILITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.