DIN EN 13336:2012-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Leather - Upholstery leather characteristics - Guide for selection of leather for furniture
Hardcopy , PDF
29-08-2022
English, German
01-12-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
5 Sampling
6 Conditioning and sampling preparation
7 Characteristics, test methods and recommended values
8 Test report
Annex A (normative)
A.1 Essential characteristics, recommended values and
test methods for upholstery leather for furniture
A.2 Subsidiary characteristics, recommended values and
test methods for upholstery leather for furniture
This standard is included in DIN Handbook 296.
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 13336 : 2012 | Identical |
| NBN EN 13336 : 2012 | Identical |
| NEN EN 13336 : 2012 | Identical |
| NS EN 13336 : 2012 | Identical |
| I.S. EN 13336:2012 | Identical |
| UNE-EN 13336:2013 | Identical |
| SN EN 13336 : 2012 | Identical |
| UNI EN 13336 : 2012 | Identical |
| BS EN 13336:2012 | Identical |
| EN 13336:2012 | Identical |
| ONORM EN 13336 : 2012 | Identical |
| DIN HDBK 296 : 4ED 2015 | MOEBEL 2 - MOEBELFERTIGUNG UND -ZUBEHOER - ALLE NORMATIVEN ANFORDERUNGEN AN MOEBELFERTIGUNG UND MOEBELZUBEHOER |
| EN ISO 3377-1:2011 | Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
| ISO 4045:2008 | Leather Chemical tests Determination of pH |
| ISO 11644:2009 | Leather — Test for adhesion of finish |
| EN ISO 4044:2017 | Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017) |
| EN 1021-1:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
| ISO 17233:2017 | Leather — Physical and mechanical tests — Determination of cold crack temperature of surface coatings |
| EN 15987:2015 | Leather - Terminology - Key definitions for the leather trade |
| ISO 5402-1:2017 | Leather Determination of flex resistance Part 1: Flexometer method |
| ISO 2418:2017 | Leather — Chemical, physical and mechanical and fastness tests — Sampling location |
| EN ISO 4045:2008 | Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
| EN ISO 15700:1999 | Leather - Tests for colour fastness - Colour fastness to water spotting (ISO 15700:1998) |
| EN ISO 2418:2017 | Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) |
| EN ISO 11640:2012 | Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO 11640:2012) |
| ISO 4044:2017 | Leather — Chemical tests — Preparation of chemical test samples |
| ISO 11640:2012 | Leather Tests for colour fastness Colour fastness to cycles of to-and-fro rubbing |
| EN ISO 11644:2009 | Leather - Test for adhesion of finish (ISO 11644:2009) |
| EN ISO 2419:2012 | Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012) |
| ISO 11641:2012 | Leather — Tests for colour fastness — Colour fastness to perspiration |
| EN ISO 11641:2012 | Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| EN ISO 17233:2017 | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2017) |
| ISO 2419:2012 | Leather — Physical and mechanical tests — Sample preparation and conditioning |
| ISO 15700:1998 | Leather — Tests for colour fastness — Colour fastness to water spotting |
| EN ISO 5402-1:2017 | Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) |
| EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.