DIN EN 13261:2011-01
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
Hardcopy , PDF
07-03-2021
English
01-01-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Product definition
3.1 Chemical composition
3.2 Mechanical characteristics
3.3 Microstructure characteristics
3.4 Material cleanliness
3.5 Permeability to ultrasound
3.6 Residual stresses
3.7 Surface characteristics
3.8 Geometrical and dimensional tolerances
3.9 Protection against corrosion and against mechanical
aggression
3.10 Marking
Annex A (normative) Particular characteristics for axles of
steel grade EA1T and EA4T
A.1 Chemical composition
A.2 Mechanical characteristics
A.3 Microstructure characteristics
Annex B (normative) Standard wedge for measurement of permeability
to ultrasound
B.1 Test piece
B.2 Tolerances of the wedge
B.3 Steel grade
Annex C (normative) Method to assess resistance to impact of the
coating
C.1 Principle
C.2 Test piece
C.3 Apparatus
C.4 Procedure
C.5 Expression of results
Annex D (normative) Method to assess resistance to impact of the
coating
D.1 Principle
D.2 Test piece
D.3 Apparatus
D.4 Procedure
D.5 Expression of results
Annex E (normative) Method to assess the resistance of the
coating to specific corrosive products
E.1 Principle
E.2 Test piece
E.3 Apparatus
E.4 Corrosive products
E.5 Procedure
E.6 Expression of results
Annex F (normative) Method to assess the resistance of the coating
to cyclic mechanical stresses
F.1 Purpose
F.2 Principle
F.3 Test piece
F.4 Apparatus
F.5 Procedure
F.6 Expression of results
Annex G (normative) Measurement of the hydrogen content in the
steel for axles at the melting stage
G.1 Sampling
G.2 Analysis methods
G.3 Precautions
Annex H (informative) Drawings of test pieces
Annex I (informative) Product qualification
I.1 General
I.2 Requirements
I.3 Qualification procedure
I.4 Qualification certificate
I.5 Qualification file
Annex J (informative) Product delivery
J.1 General
J.2 Delivery condition
J.3 Controls on each axle
J.4 Batch control
J.5 Quality plan
J.6 Allowable rectification
Bibliography
This standard is included in DIN HDBK 491/1.
DevelopmentNote |
Supersedes DIN 5576. (01/2006)
|
DocumentType |
Standard
|
Pages |
59
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN 13261 : 2009 + A1 2011 | Identical |
NBN EN 13261 : 2009 + A1 2010 | Identical |
NEN EN 13261 : 2009 + A1 2010 | Identical |
NS EN 13261 : 2009 + A1 2010 | Identical |
I.S. EN 13261:2009 | Identical |
SN EN 13261 : 2009 + A1 2010 | Identical |
UNI EN 13261 : 2011 | Identical |
BS EN 13261 : 2009 | Identical |
EN 13261:2009+A1:2010 | Identical |
ONORM EN 13261 : 2012 | Identical |
UNE-EN 13261:2009 | Identical |
EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
ISO 2808:2007 | Paints and varnishes Determination of film thickness |
EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
ISO 5948:1994 | Railway rolling stock material Ultrasonic acceptance testing |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
ISO 6933:1986 | Railway rolling stock material — Magnetic particle acceptance testing |
EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
EN 13104:2009+A2:2012 | Railway applications - Wheelsets and bogies - Powered axles - Design method |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
EN 13260:2009+A1:2010 | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO 2409:2013 | Paints and varnishes Cross-cut test |
EN 13103:2009+A2:2012 | Railway applications - Wheelsets and bogies - Non powered axles - Design method |
ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.