DIN EN 13166:2016-09
Current
The latest, up-to-date edition.
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION
Hardcopy , PDF
German, English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and
abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy
of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Determination of the declared
values of thermal resistance and thermal
conductivity
Annex B (normative) - Product type determination
PTD and factory production control (FPC)
Annex C (normative) - Determination of the aged values
of thermal resistance and thermal conductivity
Annex D (informative) - Additional properties
Annex E (normative) - PF multi-layered thermal
insulation products
Annex ZA (informative) - Clauses of this European
Standard addressing the provisions of the EU
Construction Products Regulation
Bibliography
Defines the requirements for factory made phenolic foam products, with or without facings or coatings, which are used for the thermal insulation of buildings.
| DevelopmentNote |
Partially supersedes DIN 18164-1 and DIN 18164-1 E. (02/2002)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 13166 : 2012 + A2 2016 | Identical |
| UNI EN 13166 : 2013 | Identical |
| BS EN 13166 : 2012 | Identical |
| NF EN 13166 : 2012 + A2 2016 | Identical |
| NBN EN 13166 : 2013 + A2 2016 | Identical |
| I.S. EN 13166:2012 | Identical |
| NEN EN 13166 : 2012 + A2 2016 | Identical |
| EN 13166:2012+A2:2016 | Identical |
| NS EN 13166 : 2012 + A1 2015 | Identical |
| UNE-EN 13166:2013 | Identical |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 18332:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - NATURAL STONE WORK |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 18345:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - THERMAL INSULATION COMPOSITE SYSTEMS |
| DIN 4102-4:2016-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 4: SYNOPSIS AND APPLICATION OF CLASSIFIED BUILDING MATERIALS, COMPONENTS AND SPECIAL COMPONENTS |
| DIN 18354:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - ASPHALT FLOORING WORKS |
| DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
| DIN 68800-2:2012-02 | Wood preservation - Part 2: Preventive constructional measures in buildings |
| DIN 18330:2016-09 | GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - MASONRY WORK |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN 1607:2013 | Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN ISO 4590:2016 | Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016) |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 4590:2016 | Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
| EN 14314:2015 | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
| EN 12087:2013 | Thermal insulating products for building applications - Determination of long term water absorption by immersion |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| EN 1603:2013 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 12429:1998 | Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.