DIN EN 13019:2009-04
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
Hardcopy , PDF
28-03-2022
English, German
01-04-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Liste der signifikanten Gefährdungen
5 Sicherheitsanforderungen und/oder -massnahmen
5.1 Kippbare Schmutzbehälter und kraftbetriebene
Entleerungsklappen
5.1.1 Mehrplatzbediensysteme
5.1.2 Kippbare Schmutzbehälter
5.1.3 Bewegungsantriebe
5.1.4 Anordnung von Stellteilen
5.1.5 Standsicherheit
5.1.6 Leitungen und Schläuche
5.2 Schmutzlöseeinrichtungen
5.2.1 Besen und Bürsten
5.2.2 Hub-, Senk- und Schwenkeinrichtungen
5.2.3 Arbeitsbeleuchtung
5.2.4 Wartung
5.3 Aufstiege und Tritte
5.4 Stellteile von Befehlseinrichtungen
5.5 Schutzvorrichtungen
5.5.1 Bewegliche Teile
5.5.2 Heisse Oberflächen
5.5.3 Rauch- und Abgase, Staub
5.5.4 Leitungen und Schläuche
5.5.5 Türen und Klappen
5.6 Wasseranlage
5.6.1 Wasserbehälter
5.6.2 Wascheinrichtungen
5.7 Kraftstoff- und Hydraulikflüssigkeitsbehälter
5.8 Handgeführte Reinigungseinrichtungen/Saugschläuche
5.9 Abnehmbare Maschinen und Komponenten
5.9.1 Abnehmbare Komponenten
5.9.2 Abstelleinrichtungen für Maschinen
und Komponenten
5.9.3 Trennbare energie- und signalübertragende
Systeme
5.10 Lärmminderung durch Konstruktion
5.10.1 Lärmminderung an der Quelle
5.10.2 Lärmminderung durch Schutzmassnahmen
5.10.3 Lärmminderung durch Information
5.11 Reduzierung der Vibration
6 Benutzerinformationen
6.1 Betriebs- und Wartungsanleitung
6.2 Ersatzteilliste
7 Kennzeichnung
Anhang A (informativ) - Terminologie
Anhang B (informativ) - Schmutzbehältersicherungsstütze
Anhang ZA (informativ) - Zusammenhang dieser
Europäischen Norm mit den grundlegenden
Anforderungen der EG-Richtlinie 98/37/EG
Anhang ZB (informativ) - Zusammenhang dieser
Europäischen Norm mit den grundlegenden
Anforderungen der EG-Richtlinie 2006/42/EG
Literaturhinweise
This standard is included in DIN Handbook 172-2.
| DevelopmentNote |
Supersedes DIN 30702-3 and partially supersedes DIN 30701:1986. (06/2001) Supersedes DIN 30704-1 and DIN 30704-2. (07/2007)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 13019 : 2001 | Identical |
| NF EN 13019 : 2001 + A1 2009 | Identical |
| EN 13019:2001+A1:2008 | Identical |
| I.S. EN 13019:2001 | Identical |
| NS EN 13019 : 2001 + A1 2008 | Identical |
| SN EN 13019 : 2001 + A1 2009 | Identical |
| NEN EN 13019 : 2001 + A1 2009 | Identical |
| UNI EN 13019 : 2009 | Identical |
| NBN EN 13019 : 2001 + A1 2009 | Identical |
| UNE-EN 13019:2001 | Identical |
| ONORM EN 13019 : APR 2009 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| EN 500-1:2006+A1:2009 | Mobile road construction machinery - Safety - Part 1: Common requirements |
| EN ISO 15667:2000 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 12508:1994 | Earth-moving machinery Operator station and maintenance areas Bluntness of edges |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN 626-2:1996+A1:2008 | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
| EN 13021:2003+A1:2008 | Winter service machines - Safety requirements |
| ISO 4148:2004 | Road vehicles Special warning lamps Dimensions |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 13524:2003+A2:2014 | Highway maintenance machines - Safety requirements |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN 626-1:1994+A1:2008 | Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 6750:2005 | Earth-moving machinery Operator's manual Content and format |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.