DIN EN 1279-5:2015-08 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY
Hardcopy , PDF
07-03-2021
German
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Anforderungen
4.1 Produktbeschreibung
4.2 Übereinstimmung mit der Definition von
Mehrscheiben-Isolierglas
4.3 Bestimmung der Leistungsmerkmale
4.4 Dauerhaftigkeit
4.5 Gefährliche Stoffe
5 Konformitätsbewertung
5.1 Allgemeines
5.2 Erstprüfung des Produktes
5.3 Werkseigene Produktionskontrolle und Überprüfung
von Proben nach einem vorgeschriebenen Prüfplan
5.4 Erstinspektion des Werks und der werkseigenen
Produktionskontrolle
5.5 Laufende Überwachung und Beurteilung der
werkseigenen Produktionskontrolle
6 Kennzeichnung und/oder Etikettierung
6.1 Allgemeines
6.2 Kennzeichnung des Produktes
6.3 Produktmerkmale
6.4 'Dokument zur Feststellung der Merkmale/Leistung'
Anhang A (informativ) Verwendung des
Mehrscheiben-Isolierglases (MIG) unter
UV-Strahlung und/oder in geklebten Verglasungen
(SSG)
Anhang B (informativ) Einbau des Mehrscheiben-Isolierglases
Anhang C (informativ) Bestimmungen hinsichtlich des
freiwilligen Hinzuziehens unabhängiger
Stellen
Anhang ZA (informativ) Zusammenhang zwischen dieser
Europäischen Norm und den grundlegenden
Anforderungen der EG-Bauproduktenrichtlinie
Literaturhinweise
Defines requirements, the evaluation of conformity and the factory production control of insulating glass units for use in buildings.
| DevelopmentNote |
DRAFT 2015 issued in August 2015. (08/2015)
|
| DocumentType |
Draft
|
| Pages |
86
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 1279-5 : 2005 + A2 2010 | Identical |
| NEN EN 1279-5 : 2005 + A2 2010 | Identical |
| UNI EN 1279-5 : 2010 | Identical |
| NBN EN 1279-5 : 2005 + A2 2010 | Identical |
| SN EN 1279-5 : 2005 + A2 2010 | Identical |
| ONORM EN 1279-5 : 2010 | Identical |
| NS EN 1279-5 : 2005 + A2 2010 | Identical |
| I.S. EN 1279-5:2005 | Identical |
| EN 1279-5:2005+A2:2010 | Identical |
| BS EN 1279-5 : 2005 | Identical |
| UNE-EN 1279-5:2006 | Identical |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN 4109-35:2016-07 | SOUND INSULATION IN BUILDINGS - PART 35: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - ELEMENTS, WINDOWS, DOORS, CURTAIN WALLING |
| EN 13022-1:2014 | Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
| EN 12337-1:2000 | Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 13024-1:2011 | Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and description |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN 1748-2-1:2004 | Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general physical and mechanical properties |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| EN 12898:2001 | Glass in building - Determination of the emissivity |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 1863-1:2011 | Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 14178-1:2004 | Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass |
| EN 13541:2012 | Glass in building - Security glazing - Testing and classification of resistance against explosion pressure |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| EN 12150-1:2015 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 674:2011 | Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
| EN 1063:1999 | Glass in building - Security glazing - Testing and classification of resistance against bullet attack |
| EN 1748-1-1:2004 | Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and general physical and mechanical properties |
| EN 357:2004 | Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance |
| ISO 12543-1:2011 | Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts |
| EN 675:2011 | Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| EN 356:1999 | Glass in building - Security glazing - Testing and classification of resistance against manual attack |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.