DIN EN 12195-2:2001-02
Current
The latest, up-to-date edition.
LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES
Hardcopy , PDF
German, English
01-01-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Einleitung
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Gefährdungen
5 Sicherheitsanforderungen
6 Überprüfung der Sicherheitsanforderungen und
Prototypprüfungen
7 Prüfbericht
8 Kennzeichnung
9 Benutzerinformationen
Anhang A (normativ) Gefährdungen
Anhang B (normativ) Praktische Hinweise zur
Benutzung und Pflege von
Zurrgurten, die vom Hersteller mitzuliefern sind
Defines safety requirements for web lashing made from man-made fibres with flat woven webbings for multiple use and of lashing combinations with woven webbings for the safe surface transport of goods on road vehicles.Also includes tensioning devices to be hand driven with a maximum hand force of 500 N. Defines methods for testing of web lashing for securing of loads. Also deals with the significant hazards which could be occur while dealing with web lashings. Composite load restraint assemblies are also covered.
| DevelopmentNote |
Supersedes DIN 60060-1. (05/2001)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 12195-2 : 2001 | Identical |
| UNE-EN 12195-2:2001 | Identical |
| NBN EN 12195-2 : 2001 | Identical |
| NEN EN 12195-2 : 2000 | Identical |
| NS EN 12195-2 : 1ED 2001 | Identical |
| I.S. EN 12195-2:2000 | Identical |
| SN EN 12195-2 : 2001 | Identical |
| UNI EN 12195-2 : 2004 | Identical |
| BS EN 12195-2:2001 | Identical |
| EN 12195-2:2000 | Identical |
| DGUV GRUNDSATZ 301-004 : 2017 | QUALIFIZIERUNG VON PERSONEN FUER DIE MONTAGE VON SCHUTZ- UND ARBEITSPLATTFORMNETZEN SOWIE RANDSICHERUNGEN |
| VDI 2700 Blatt 16:2009-07 | Securing of loads on road vehicles - Securing of loads on transporter up to a total mass of 7,5 t |
| VDI 2700 Blatt 3.3:2013-05 | Securing of loads on road vehicles - Cargo nets for load securing |
| VDI 2700 Blatt 17:2009-04 | Securing of loads on road vehicles - Securing of skips on skip loader vehicles and their trailers |
| VDI 3968 Blatt 1:2013-04 | Securing of load units - Specification of requirements |
| VDI 2700 Blatt 5:2011-12 | Securing of loads on road vehicles - Quality management systems |
| VDI 4460:2003-03 | Returnable transport packages and recycling systems for efficient load transport |
| VDI 2700 Blatt 19:2011-01 | Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel |
| VDI 2700 Blatt 2:2014-07 | Securing of loads on road vehicles - Calculation of tie-down forces - Fundamentals |
| VDI 2700:2004-11 | Securing of loads on road vehicles |
| VDI 2700 Blatt 7:2014-07 | Securing of loads on road vehicles - Safety of loads in combined transport |
| VDI 2700 Blatt 11:2006-10 | Securing of loads on road vehicles - Securing of reinforcing steel |
| VDI 2700 Blatt 3.1:2006-10 | Securing of loads on road vehicles - Instruction manual for lashings |
| VDI 2700 Blatt 10.1:2016-11 | Securing of loads on road vehicles - Securing of precast concrete elements - Plane concrete elements |
| VDI 2700 Blatt 8.1:2009-04 | Securing of loads on road vehicles - Securing of passenger cars and cargo minivans on vehicle transporters |
| VDI 2383:2003-05 | Liquid container with drain valve - Nominal size 500 to 1000 l |
| VDI 2700 Blatt 12:2009-01 | Securing of loads on road vehicles - Securing of beverage products |
| VDI 2700 Blatt 8.2:2010-12 | Securing of loads on road vehicles - Securing of trucks on vehicle transporters |
| VDI 2700 Blatt 6:2006-10 | Securing of loads on road vehicles - Part-load consignment |
| VDI 2700 Blatt 3.2:2006-09 | Securing of loads on road vehicles - Vehicles equipments and securing aids for load |
| VDI 2363:2003-05 | Liquid container without drain valve - Nominal size 250 l |
| EN 10002-2 : 1991 | METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE |
| ISO 2076:2013 | Textiles Man-made fibres Generic names |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| EN ISO 9003:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| PREN 12195-1 : DRAFT 1995 | LOAD RESTRAINT ASSEMBLIES - SAFETY - PART 1: CALCULATION OF LASHING FORCES |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.