DIN EN 12020-1:2008-06
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
Hardcopy , PDF
25-04-2022
English, German
01-06-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Bestellangaben
4.1 Allgemeines
4.2 Verweisung auf eine Zeichnung
5 Anforderungen
5.1 Herstellungsverfahren und Fertigungsabläufe
5.2 Qualitätsprüfung
5.3 Grenzwerte für die chemische Zusammensetzung
5.4 Mechanische Eigenschaften
5.5 Freiheit der Oberfläche von Qualitätsmängeln
5.6 Grenzabmasse und Formtoleranzen
5.7 Masse des Profils
6 Prüfvorgang
6.1 Probenahme
6.2 Prüfverfahren
7 Prüfbescheinigungen
8 Kennzeichnung der Erzeugnisse
9 Verpackung
10 Schiedsverfahren
Literaturhinweise
This standard is included in DIN Handbook 450/2 and 450/4. Describes technical conditions for inspection and delivery of alloys EN AW-6060 and EN AW-6063 extruded precision profiles manufactured with and without a thermal barrier and without further surface treatment.
| DevelopmentNote |
Supersedes DIN 17615-1 (07/2001)
|
| DocumentType |
Standard
|
| Pages |
13
|
| ProductNote |
Supersedes DIN 17615-1 (Amit 07/2001)
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 12020-1 : 2008 | Identical |
| NF EN 12020-1 : 2008 | Identical |
| UNE-EN 12020-1:2009 | Identical |
| NBN EN 12020-1 : 2008 | Identical |
| NEN EN 12020-1 : 2008 | Identical |
| NS EN 12020-1 : 2ED 2008 | Identical |
| I.S. EN 12020-1:2008 | Identical |
| SN EN 12020-1 : 2008 | Identical |
| UNI EN 12020-1 : 2008 | Identical |
| BS EN 12020-1:2008 | Identical |
| EN 12020-1:2008 | Identical |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 755-1:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN 12258-1:2012 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
| EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| EN 515:2017 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| EN 14361:2004 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
| EN 14024:2004 | Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment |
| EN 14726:2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 755-2:2016 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.