DIN EN 10341:2006-08
Current
The latest, up-to-date edition.
COLD ROLLED ELECTRICAL NON-ALLOY AND ALLOY STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE
Hardcopy , PDF
English
01-01-2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
4.1 Classification
4.2 Designation
5 Information to be supplied by the purchaser
5.1 Mandatory information
5.2 Options
6 General requirements
6.1 Production process
6.2 Form of supply
6.3 Delivery condition
6.4 Surface condition
6.5 Suitability for cutting
7 Technical requirements
7.1 Magnetic properties
7.2 Geometrical characteristics and tolerances
7.3 Other properties
8 Inspection and testing
8.1 General
8.2 Sampling
8.3 Preparation of test specimens
8.4 Test methods
8.5 Retests
9 Marking, labelling and packing
10 Complaints
Annex A (informative) Maximum specific total loss at 1,0 T
Annex B (informative) Density determination
Bibliography
National Annex NA (informative) Bibliography
Defines cold-rolled electrical non-oriented non-alloy or alloy steel sheet and strip delivered in nominal thicknesses of 0,50 mm and 0,65 mm in the semi-processed condition, that is without final heat treatment; in particular, it specifies general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as the inspection procedure.
| DevelopmentNote |
Supersedes DIN EN 10126 E and DIN EN 10165 E. (02/2007)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| EN 10341:2006 | Identical |
| NEN EN 10341 : 2006 | Identical |
| I.S. EN 10341:2006 | Identical |
| BS EN 10341:2006 | Identical |
| NBN EN 10341 : 2006 | Identical |
| NF EN 10341 : 2006 | Identical |
| NS EN 10341 : 1ED 2006 | Identical |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 7799:1985 | Metallic materials — Sheet and strip 3 mm thick or less — Reverse bend test |
| EN ISO 7799:2000 | Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test (ISO 7799:1985) |
| IEC 60404-8-3:2005 | Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 60404-2:1998/A1:2008 | MAGNETIC MATERIALS - PART 2: METHODS OF MEASUREMENT OF THE MAGNETIC PROPERTIES OF ELECTRICAL STEEL STRIP AND SHEET BY MEANS OF AN EPSTEIN FRAME |
| EN 10282:2001 | Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10251:1997 | Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip |
| IEC 60050-121:1998 | International Electrotechnical Vocabulary (IEV) - Part 121: Electromagnetism |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| IEC 60404-1:2016 | Magnetic materials - Part 1: Classification |
| IEC 60404-8-2:1998 | Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electrical alloyed steel sheet and strip delivered in the semi-processed state |
| IEC 60404-2:1996+AMD1:2008 CSV | Magnetic materials - Part 2: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an Epstein frame |
| IEC 60404-13:1995 | Magnetic materials - Part 13: Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.