DIN EN 10288:2003-12
Current
The latest, up-to-date edition.
STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS
Hardcopy , PDF
English, German
01-01-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1. Scope
2. Normative references
3. Terms, definitions and symbols
3.1 Terms and definitions
3.2 Symbols
4. Classification of coatings
5. Information to be supplied by the purchaser
5.1 Mandatory
5.2 Options to be indicated by the purchaser
6. Documents
7. Application of the coating
7.1 Surface preparation
7.2 Composition of the coating
8. Requirements of the applied coating
8.1 General
8.2 Appearance and continuity
8.3 Thickness of the coating system
8.4 Cut back at the ends
8.5 Holiday detection
8.6 Impact resistance
8.7 Peel force
8.8 Indentation resistance
8.9 Electrical insulation resistance
8.10 Elongation at break
8.11 Resistance to ultraviolet irradiation
8.12 Thermal stability
8.13 Cathodic disbondment
8.14 Flexibility
9. Inspection
9.1 Document
9.2 Sampling
9.3 Nature and frequency of testing and control
9.4 Retests
10. Repairs
11. Marking
12. Handling, transportation and storage
12.1 Handling
12.2 Transportation to the storage area
12.3 Storage
12.4 Loading of tubes and components for delivery
Annex A (normative) Inspection of thickness
A.1 General
A.2 Apparatus
A.3 Procedure
A.4 Results
Annex B (normative) Holiday detection test
B.1 General
B.2 Apparatus
B.3 Procedure
B.4 Results
Annex C (normative) Impact test
C.1 General
C.2 Apparatus
C.3 Procedure
C.4 Results
Annex D (normative) Peel force test
D.1 Measurement of the peeling force on a coated
sample (type 1)
D.2 Measurement of the peel strength on large
diameter tube (type 2)
Annex E (normative) Indentation test
E.1 General
E.2 Apparatus
E.3 Procedure
E.4 Results
Annex F (normative) Specific electrical insulation resistance
test
F.1 General
F.2 Apparatus
F.3 Procedure
F.4 Results
Annex G (normative) Elongation at break test
G.1 General
G.2 Apparatus
G.3 Sampling
G.4 Procedure
G.5 Results
Annex H (normative) Ultraviolet irradiation and thermal
stability tests
H.1 Resistance to ultraviolet irradiation
H.2 Thermal stability
Annex J (normative) Cathodic disbondment test
J.1 General
J.2 Apparatus
J.3 Sampling
J.4 Procedure
J.5 Results
Annex K (normative) Types of inspection documents
Annex L (informative) A-deviation
Bibliography
Describes the application of factory applied external two layer extruded polyethylene based coatings for the corrosion protection of tubes and pipeline components.
| DevelopmentNote |
Partially supersedes DIN 30670 E issue 04-1991. (03/2004)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Standards | Relationship |
| UNI EN 10288 : 2003 | Identical |
| NBN EN 10288 : 2002 | Identical |
| NF EN 10288 : 2002 | Identical |
| SN EN 10288 : 2003 | Identical |
| UNE-EN 10288:2002 | Identical |
| BS EN 10288:2002 | Identical |
| NS EN 10288 : 1ED 2002 | Identical |
| I.S. EN 10288:2002 | Identical |
| EN 10288:2002 | Identical |
| NEN EN 10288 : 2002 | Identical |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| DIN EN ISO 8501-1:2007-12 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS |
| DIN EN ISO 527-2:2012-06 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| ISO 11420:1996 | Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds |
| ISO 1183:1987 | Plastics Methods for determining the density and relative density of non-cellular plastics |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.