DIN EN 10213:2016-10
Current
Current
The latest, up-to-date edition.
STEEL CASTINGS FOR PRESSURE PURPOSES
Available format(s)
Hardcopy , PDF
Language(s)
English, German
Published date
01-10-2016
$241.08
Including GST where applicable
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designation
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
12 Supplementary information
Annex A Welding conditions
Annex B (informative) - Physical properties
Annex C (informative) - Creep properties
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2014/68/EU
Pertains to steel castings for pressure containing parts.
| DevelopmentNote |
Supersedes DIN EN 10213-1, DIN EN 10213-2, DIN EN 10213-3 and DIN EN 10213-4. (01/2008)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN 10213 : 2007 | Identical |
| I.S. EN 10213:2007 | Identical |
| NF EN 10213 : 2007 + A1 2016 | Identical |
| NS EN 10213 : 2007 | Identical |
| EN 10213:2007+A1:2016 | Identical |
| NBN EN 10213 : 2008 + A1 2016 | Identical |
| NEN EN 10213 : 2007 + A1 2016 | Identical |
| VDG P 695 : 2008 | TECHNISCHE LIEFERBEDINGUNGEN FUER FEINGUSSSTUECKE - ALLGEMEINE BEDINGUNGEN |
| DIN 3230-5:2014-11 | TECHNICAL CONDITIONS OF DELIVERY OF VALVES - VALVES FOR GAS INSTALLATIONS AND GAS PIPELINES - PART 5: REQUIREMENTS AND TESTS |
| KTA 3204 : 2015 | |
| DIN 6650-5:2014-12 | DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 5: SAFETY, HYGIENIC AND APPLICATION-TECHNICAL REQUIREMENTS AND TESTING OF READY-FOR-USE DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES, COMPONENT ASSEMBLIES AND COMPONENTS |
| KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
| DIN 81249-2:2013-05 | CORROSION OF METALS IN SEA WATER AND SEA ATMOSPHERE - PART 2: FREE CORROSION IN SEA WATER |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| ISO 3452-1:2013 | Non-destructive testing — Penetrant testing — Part 1: General principles |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
| EN ISO 16810:2014 | Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
| EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| EN 1370:2011 | Founding - Examination of surface condition |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN 1369:2012 | Founding - Magnetic particle testing |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12681:2003 | Founding - Radiographic examination |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.