DIN EN 10210-1:2016-01 (Draft)
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016
Hardcopy , PDF
02-04-2024
German, German - English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe und Symbole
3.1 Begriffe
3.2 Symbole
4 Einteilung und Bezeichnung
4.1 Einteilung
4.2 Bezeichnung
5 Bestellangaben
5.1 Verbindliche Angaben
5.2 Optionen
5.3 Bestellbeispiel
6 Anf orderungen
6.1 Allgemeines
6.2 Stahlherstellungsverfahren
6.3 Herstellverfahren für die Hohlprofile
6.4 Lieferzustand
6.5 Chemische Zusammensetzung
6.6 Mechanische Eigenschaften
6.7 Technologische Eigenschaften
6.8 Oberflächenbeschaffenheit
6.9 Zerstörungsfreie Prüfung der Schweissnähte
6.10 Grenzabmasse und Masse
7 Prüfung
7.1 Arten der Prüfung
7.2 Arten der Prüfbescheinigungen
7.3 Zusammenfassung der Prüfungen
8 Probenahme
8.1 Prüfumfang
8.2 Vorbereitung der Probenabschnitte und Proben
9 Prüfverfahren
9.1 Chemische Zusammensetzung
9.2 Mechanische Prüfungen
9.3 Sichtprüfung und Prüfung der Masse
9.4 Zerstörungsfreie Prüfung
9.5 Wiederholungsprüfungen, Sortieren und Nachbehandlung
10 Kennzeichnung
11 Konformitätsbescheinigung
Anhang A (normativ) Hohlprofile für den Stahlbau aus
unlegierten Qualitätsstählen - Chemische
Zusammensetzung und mechanische Eigenschaften
Anhang B (normativ) Hohlprofile für den Stahlbau aus
Feinkornbaustählen - Chemische Zusammensetzung und
mechanische Eigenschaften
Anhang C (normativ) Lage der Probenabschnitte und Proben
Anhang D (normativ) Konformitätsbescheinigung
Anhang ZA (informativ) Abschnitte in dieser Europäischen Norm,
die grundlegende Anforderungen oder andere Vorgaben
der EG-Bauproduktenrichtlinien betreffen
Literaturhinweise
This standard is included in DIN Handbook 402. Defines technical delivery conditions for hot finished hollow sections of circular, square, rectangular or elliptical forms and applies to hollow sections formed hot, with or without subsequent heat treatment, or formed cold with subsequent heat treatment to obtain equivalent metallurgical conditions to those obtained in the hot formed product.
| DevelopmentNote |
Supersedes DIN 17121 (06/2003) DRAFT 2016 issued in January 2016. (01/2016)
|
| DocumentType |
Draft
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| Standards | Relationship |
| EN 10210-1:2006 | Identical |
| DIN EN 10210-2:2016-02 (Draft) | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
| DIN 18800-7:2008-11 | STEEL STRUCTURES - PART 7: EXECUTION AND CONSTRUCTER'S QUALIFICATION |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| DIN 28017-3:2012-04 | STATIONARY ACCESSES TO PROCESS APPARATUS - PART 3: VERTICAL LADDERS |
| DIN 28017-2:2012-04 | STATIONERY ACCESSES TO PROCESS APPARATUS - PART 2: RAILINGS FOR PLATFORMS |
| DIN 28017-4:2012-04 | STATIONARY ACCESSES TO PROCESS APPARATUS - PART 4: SAFETY DEVICES AGAINST UNINTENTIONAL DESCENT |
| DIN HDBK 402 : 5ED 2009 | STAHL UND EISEN: GUETENORMEN 2 - BAUWESEN, METALLVERARBEITUNG - BETONSTAHL - STAEHLE FUER DEN STAHLBAU - FLACHERZEUGNISSE OHNE UEBERZUEGE - FLACHERZEUGNISSE MIT UEBERZUEGEN - SPUNDBOHLEN - VERPACKUNGSBLECH |
| DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| EN 10256:2000 | Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
| EN 1011-1:2009 | Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN ISO 2566-1:1999 | Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
| DIN EN 10025-2:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
| DIN EN 10210-2:2016-02 (Draft) | HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10246-10:2000 | Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections |
| ISO 2566-1:1984 | Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10246-9:2000 | Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10246-3:1999 | Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
| DIN EN 10219-1:2016-01 (Draft) | Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016 |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| DIN EN 10025-3:2011-04 (Draft) | HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN 10266:2003 | Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards |
| EN 10025-3:2004 | Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10246-8:1999 | Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
| EN 10246-5 : 1999 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.