DIN EN 10169-3:2003-09
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
Hardcopy , PDF
01-02-2011
English
01-01-2003
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
6 Substrates, organic coatings, manufacture of the product
6.1 Steel substrates
6.2 Organic coatings
6.3 Manufacturing process
7 Requirements
7.1 Properties which form part of factory production
control
7.2 Performance properties
7.3 Freedom of defects
8 Inspection and testing
8.1 General
8.2 Test units
8.3 Type and number of tests
8.4 Sampling
8.5 Retests
8.6 Inspection documents
9 Marking
10 Packing and dispatch
11 Storage
12 Disputes
Annex A (informative) - Types of ambiences
Annex B (informative) - More common coating materials and coating
thickness(es)
Bibliography
This standard is included in DIN Handbook 402 E. Specifies the requirements for continuously organic coated (coil coated) steel flat products used for building interior applications.
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Standards | Relationship |
| NF EN 10169-3 : 2003 | Identical |
| I.S. EN 10169-3:2003 | Identical |
| UNE-EN 10169-3:2007 | Identical |
| NBN EN 10169-3 : 2003 | Identical |
| NEN EN 10169-3 : 2003 | Identical |
| UNI EN 10169-3 : 2006 | Identical |
| SN EN 10169-3 : 2003 | Identical |
| NS EN 10169-3 : 1ED 2003 | Identical |
| BS EN 10169-3:2003 | Identical |
| EN 10169-3:2003 | Identical |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| ENV 10169-2 : 1999 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10079:2007 | Definition of steel products |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 10152:2017 | Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
| EN 13523-6:2002 | Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test) |
| EN 10268:2006+A1:2013 | Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions |
| EN 13523-9:2014 | Coil coated metals - Test methods - Part 9: Resistance to water immersion |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 13523-0:2014 | Coil coated metals - Test methods - Part 0: General introduction |
| EN 13523-3:2014 | Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison |
| EN 10139:2016 | Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions |
| EN 10154 : 2002 | CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| ENV 606 : DRAFT 1993 | BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 13523-22:2017 | Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 11997-1:2017 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid |
| EN ISO 4543:1994 | Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions (ISO 4543:1981) |
| EN 13523-18:2002 | Coil coated metals - Test methods - Part 18: Resistance to staining |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN 13523-8:2017 | Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog) |
| EN 10130:2006 | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 13523-7:2014 | Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test) |
| EN 13523-1:2017 | Coil coated metals - Test methods - Part 1: Film thickness |
| EN 10292:2007 | Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 13523-2:2014 | Coil coated metals - Test methods - Part 2: Gloss |
| CR 10260 : 1998 | DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.