DIN 863-1:2016-07 (Draft)
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS
Hardcopy , PDF
07-03-2021
German
01-01-2016
This standard is included in DIN Handbook 11-3.
DevelopmentNote |
Supersedes DIN 863. (03/2003) Applies in conjunction with DIN EN ISO 3611 issue 03-2011. (02/2017)
|
DocumentType |
Draft
|
Pages |
8
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
Supersedes |
BWB TL 5210-0003 : 7ED 2002 | OUTSIDE MICROMETER CALIBER KIT, DIGITAL, MEASURING RANGE 0 TO 50 MM, SWITCHABLE FROM 0 TO 2 INCH |
DIN 3761-5:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TEST; MEASURING REQUIREMENTS AND INSTRUMENTS |
DIN 57472-401 : 1984 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; OUTER DIMENSIONS |
BWB TL 5210-0031 : 2ED 2005 | |
BS ISO 14420:2005 | Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion |
DIN 8632-1:1989-05 | MACHINE TOOLS; SURFACE GRINDING MACHINES WITH HORIZONTAL GRINDING WHEEL SPINDLE AND RECTANGULAR RECIPROCATING TABLE; ACCEPTANCE CONDITIONS |
DIN 57472-402 : 1984 | TESTING OF INSULATED CABLES, WIRES AND FLEXIBLE CORDS; WALL THICKNESS AND THICKNESS OF ARMOURING |
BS ISO 18142:2014 | Carbonaceous materials for the production of primary aluminium. Baked carbon bodies. Determination of the dynamic elasticity modulus by the resonance method |
DIN 52312-3:1978-09 | TESTING OF GLASS; DETERMINATION OF VISCOSITY; FIBRE ELONGATION METHOD |
BWB TL 5210-0007 : 4ED 2006 | OUTSIDE MICROMETER CALIBER, MEASURING RANGE 0 TO 400 MM |
VDE 0472-402 : 1984 | TESTING OF INSULATED CABLES, WIRES AND FLEXIBLE CORDS; WALL THICKNESS AND THICKNESS OF ARMOURING |
DIN EN 60672-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - PART 2: METHODS OF TEST |
03/317248 DC : DRAFT OCT 2003 | BS ISO 14420 - CARBONACEOUS MATERIALS FOR USE IN THE PRODUCTION OF ALUMINIUM - PREBAKED ANODES AND CARBON SHAPED PRODUCTS - DETERMINATION OF THE COEFFICIENT OF THERMAL DILATION |
DIN 51936:2016-08 | Testing of carbonaceous materials - Determination of thermal diffusity at high temperatures by the laser pulse method - Solid materials |
BWB TL 5210-0015 : 1ED 2003 | BUEGELMESSSCHRAUBENSATZ FUER GEWINDEMESSUNG, MESSBEREICH 50 BIS 75 MM, MIT 5 GEWINDEEINSAETZEN |
DIN 51909:1998-04 | DETERMINATION OF THE LINEAR THERMAL EXPANSION COEFFICIENT OF SOLID CARBONACEOUS MATERIALS |
VDI/VDE/DGQ 2618 Blatt 10.7:2010-08 | Inspection of measuring and test equipment - Test instruction for internal micrometers with 2-point contact |
VDI/VDE/DGQ 2618 Blatt 10.2:2010-04 | Inspection of measuring and test equipment - Test instruction for micrometers for screw thread measurement and other measurement purposes |
DIN EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
DIN HDBK 11-3 : 12ED 2017 | LAENGENPRUEFTECHNIK 3 - MESSGERAETE UND MESSVERFAHREN FUER DIE LAENGENPRUEFTECHNIK |
BWB TL 5210-0038 : 1ED 2005 | |
DKD-R 4-3-10.3 : 2010 | KALIBRIEREN VON MESSMITTELN FUER GEOMETRISCHE MESSGROESSEN - BLATT 10.3: KALIBRIEREN VON FEINZEIGERMESSSCHRAUBEN |
DKD-R 4-3-10.1 : 2010 | CALIBRATION OF MEASURING AND TEST EQUIPMENT FOR GEOMETRICAL MEASURANDS - SHEET 10.1: CALIBRATION OF DIAL GAUGES |
13/30274609 DC : 0 | BS ISO 18142 - CARBONACEOUS MATERIALS FOR THE PRODUCTION OF PRIMARY ALUMINIUM - BAKED CARBON BODIES - DETERMINATION OF THE DYNAMIC ELASTICITY MODULUS BY THE RESONANCE METHOD |
DKD-R 4-3-10.2 : 2010 | KALIBRIEREN VON MESSMITTELN FUER GEOMETRISCHE MESSGROESSEN - BLATT 10.2: KALIBRIEREN VON BUEGELMESSSCHRAUBEN FUER GEWINDEMESSUNGEN |
DIN EN 623-2:1993-11 | Advanced technical ceramics; monolithic ceramics; general and textural properties; determination of density and porosity |
VDE 0472-401 : 1984 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - OUTER DIMENSIONS |
BWB TL 5210-0023 : 2ED 2005 | |
DIN EN 820-5:2009-10 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES |
DIN HDBK 11 : 10ED 2000 | |
DIN EN 843-7:2010-11 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests |
DIN EN 820-4:2013-01 | ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES |
DIN 863-3:1999-04 | VERIFICATION OF GEOMETRICAL PARAMETERS - MICROMETERS - PART 3: SPECIAL DESIGN MICROMETER CALLIPERS FOR EXTERNAL MEASUREMENT - CHARACTERISTICS, REQUIREMENTS, TESTING |
ISO 18142:2014 | Carbonaceous materials for the production of primary aluminium — Baked carbon bodies — Determination of the dynamic elasticity modulus by the resonance method |
DIN 3535-6:2011-01 | GASKETS FOR GAS SUPPLY - PART 6: GASKET MATERIALS BASED ON FIBRES, GRAPHITE OR POLYTETRAFLUOROETHYLENE (PTFE) FOR GAS VALVES, GAS APPLIANCES AND GAS MAINS |
DIN EN 1159-1:2007-11 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007) |
BWB TL 4940-0082 : 2ED 1994 | SHOP EQUIPMENT FOR TOOL KIT AIRCRAFT MAINTENANCE, LFZ INST HFLG, TRANSPORTABLE |
VDE 0335-2 : 2000 | CERAMIC AND GLASS INSULATING MATERIALS - METHODS OF TEST |
DIN 51065-1:1985-08 | TESTING OF CERAMIC MATERIALS; DETERMINATION OF BULK DENSITY OF SHAPED ARTICLES AND FRAGMENTS |
DIN 72551-5:1993-02 | ROAD VEHICLES - LOW-TENSION CABLES - SINGLE-CORE, UNSCREENED WITH THIN PVC-INSULATION - REQUIREMENTS, TEST |
DIN 3754-1:1984-05 | GASKET MATERIALS - COMPRESSED ASBESTOS FIBRE SHEETS - DIMENSIONS, REQUIREMENTS, TESTING |
DIN 52312-4:1983-09 | TESTING OF GLASS; MEASUREMENT OF VISCOSITY; BEAM BENDING METHOD |
DIN 3761-1:1984-01 | ROTARY SHAFT LIP TYPE SEALS FOR AUTOMOBILES; TERMS, FORMULA SYMBOLS, TOLERANCES |
ISO 14420:2005 | Carbonaceous products for the production of aluminium Baked anodes and shaped carbon products Determination of the coefficient of linear thermal expansion |
DIN EN 12923-1:2007-03 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
DIN EN 993-5:1998-12 | METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH |
DIN EN 15335:2007-08 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 ?C |
DIN 55804:1979-12 | MACHINE TOOLS - GUILLOTINE SHEARS WITH PARALLEL GUIDED KNIFE BEAM - ACCEPTANCE CONDITIONS |
DIN EN ISO 1:2015-03 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES (ISO 1:2016) |
DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
ISO/TR 14253-6:2012 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
DIN EN ISO 14978:2006-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.