DIN 51623:2015-12
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FUELS FOR VEGETABLE OIL COMPATIBLE COMBUSTION ENGINES - FUEL FROM VEGETABLE OIL - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
03-11-2020
German, English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Product designation and marking
5 Requirements and testing
6 Product treatment and sampling
Annex A (normative) - Visual examination of the
liquid fuel after cooling
Annex B (normative) - Adaptation of the test method
according to DIN EN 15195:2007-08 for the
purposes of vegetable oil fuel
Annex C (informative) - Verification of the oil identity
Annex D (informative) - Calculation of fuel properties
using structural parameters
Annex E (informative) - Further information on properties
and test methods
Annex F (informative) - Index to describe the
viscosity-temperature behaviour of vegetable
oil fuel
Bibliography
Describes the properties and limit values for the use of vegetable oil as fuel for combustion engines that are compatible with vegetable oil, together with the methods to be applied for testing these properties.
| DevelopmentNote |
Supersedes DIN SPEC 51623. (12/2015)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| S.R. CEN/TR 17144:2017 | RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS |
| PD CEN/TR 17144:2017 | Resistance of metallic materials to liquid biogenic and alternative fuels and their blends |
| DIN 51605:2016-01 | FUELS FOR VEGETABLE OIL COMPATIBLE COMBUSTION ENGINES - FUEL FROM RAPESEED OIL - REQUIREMENTS AND TEST METHODS |
| DIN 51563:2011-04 | Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m |
| DIN EN ISO 12937:2002-03 | PETROLEUM PRODUCTS - DETERMINATION OF WATER - COULOMETRIC KARL FISCHER TITRATION METHOD |
| DIN EN 12823-2:2000-07 | FOODSTUFFS - DETERMINATION OF VITAMIN A BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY - PART 2: MEASUREMENT OF BETA-CAROTENE |
| DIN 51627-6:2011-03 | Automotive Fuels - Test methods - Part 6: Direct determination of trace elements in vegetable oils by inductively coupled plasma optical emission spectroscopy (ICP OES) |
| DIN EN ISO 3675:1999-11 | CRUDE PETROLEUM AND LIQUID PETROLEUM PRODUCTS - LABORATORY DETERMINATION OF DENSITY - HYDROMETER METHOD |
| DIN 51900-1:2000-04 | Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information |
| DIN EN ISO 20884:2011-07 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| DIN EN ISO 12966-3:2016-11 | ANIMAL AND VEGETABLE FATS AND OILS - GAS CHROMATOGRAPHY OF FATTY ACID METHYL ESTERS - PART 3: PREPARATION OF METHYL ESTERS USING TRIMETHYLSULFONIUM HYDROXIDE (TMSH) (ISO 12966-3:2016) |
| DIN 51900-2:2003-05 | Determining the gross calorific value of solid and liquid fuels using the isoperibol or static jacket calorimeter and calculation of net calorific value |
| DIN EN ISO 20846:2012-01 | PETROLEUM PRODUCTS - DETERMINATION OF SULFUR CONTENT OF AUTOMOTIVE FUELS - ULTRAVIOLET FLUORESCENCE METHOD (ISO 20846:2011) |
| DIN 51659-2:2017-02 | LUBRICANTS - TEST METHODS - PART 2: DETERMINATION OF THE KINEMATIC VISCOSITY OF USED LUBRICATING OILS BY STABINGER VISCOMETER |
| DIN EN ISO 2719:2015-07 (Draft) | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| DIN 51900-3:2005-01 | Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 3: Method using adiabatic jacket |
| DIN EN ISO 3104:1999-12 | Petroleum products - Determination of kinematic viscosity and calculation of dynamic viscosity of transparent and opaque liquids (includes Corrigendum AC:1999) (ISO 3104:1994 + Cor 1:1997) |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15195:2015-02 | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| DIN EN 12662:2014-07 | Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
| DIN EN ISO 3170:2004-06 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
| DIN EN 14112:2014-07 (Draft) | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF OXIDATION STABILITY (ACCELERATED OXIDATION TEST) |
| DIN EN ISO 3961:2013-12 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF IODINE VALUE (ISO 3961:2013) |
| DIN EN ISO 12185:1997-11 | Crude petroleum and petroleum products - Determination of density using the oscillating U-tube method (ISO 12185:1996) |
| DIN EN ISO 660:2009-10 | ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF ACID VALUE AND ACIDITY |
| DIN EN 14103:2015-05 | FAT AND OIL DERIVATIVES - FATTY ACID METHYL ESTERS (FAME) - DETERMINATION OF ESTER AND LINOLENIC ACID METHYL ESTER CONTENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.