DIN 4788-2:1990-02
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FAN-ASSISTED GASBURNERS; TERMINOLOGY, SAFETY REQUIREMENTS, TESTING, MARKING
Hardcopy , PDF
01-12-1996
English
12-01-2013
1 Anwendungsbereich
2 Begriffe
3 Sicherheitstechnische Anforderungen
4 Prüfung
5 Kennzeichnung
6 Aufstellungs- und Betriebsanleitung
Specifies automatic and semi-automatic induced and forced draught burners ('burners', for short) which meet the design specifications set out in sub-clause 3.1 and are operated on gases specified in the DVWG-Arbeits-blatt (Data sheet) G 260/1; the standard also deals with the utilization and installation of these burners in various types of heater, such as those specified in DIN4754, DIN 4756, and DIN 4794 Parts 1 and 3. The specifications of sub-clause 4.2.3 with respect to individual testing shall apply for burners operating on other industrial gases (e.g. gases with a relative density, dy, higher than 1,3), unless the manufacturer requests that the burner concerned be subjected to type testing fied in sub-clause 4.2.1.
| DevelopmentNote |
Supersedes DIN 4788 (07/2002)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN 4787-1:1981-09 | ATOMIZING OIL BURNERS - DEFINITIONS, SAFETY REQUIREMENTS, TESTING, MARKING |
| DIN 4702-6:1990-03 | CENTRAL HEATING BOILERS; CONDENSING BOILERS FOR GASEOUS FUELS |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DGUV VORSCHRIFT 80 : 1998 |
| DVGW G 600 : 2008 SUPP 2014 | TECHNICAL SPECIFICATIONS FOR GAS INSTALLATIONS (DVGW-TRGI) |
| DIN 3391:1996-11 | VALVES AND MULTIFUNCTIONAL CONTROLS FOR GASEOUS COMBUSTIBLES; SAFETY REQUIREMENTS OF GENERAL NATURE |
| DIN 4189-1:1968-02 | SCREENING SURFACES; WOVEN WIRE CLOTH MADE OF STEEL, STAINLESS STEEL AND NON-FERROUS METALS, DIMENSIONS |
| DIN VDE 0116 : 1989 | ELECTRICAL EQUIPMENT OF FURNACES |
| DIN 31000 : 1979 | GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS |
| DIN 3535-4:1978-08 | SEALS IN GAS SUPPLY; SEALS OF IT-PLATES FOR GAS VALVES, GAS APPLIANCES AND GAS PIPELINES |
| DIN 4788-1:1977-06 | GAS BURNERS WITHOUT VENTILATION (ATMOSPHERIC GAS BURNERS) |
| DIN 3398-1:1992-01 | PRESSURE SWITCHES FOR GAS - SAFETY REQUIREMENTS, TESTING |
| DIN 4791:1985-09 | ELECTRICAL CONNECTORS BETWEEN BURNER AND HEAT GENERATOR |
| DIN 3392 : 1971 | GAS PRESSURE REGULATORS FOR GAS APPLIANCES |
| DIN 3362-1 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; DEFINITIONS, REQUIREMENTS, MARKING |
| DIN 6771-6:1988-04 | PRINTED FORMS FOR TECHNICAL DOCUMENTS; DRAWING SHEETS |
| DIN 3386:2012-10 | GASFILTERS HAVING A MAXIMUM WORKING PRESSURE OF LESS OR EQUAL TO 5 BAR - REQUIREMENTS AND TESTING |
| DIN 3535-5:1993-12 | SEALANTS FOR GAS SUPPLY; SEALING MATERIALS OF RUBBER, CORK AND SYNTHETIC FIBRES FOR GAS ARMATURES AND GAS APPLIANCES; SAFETY REQUIREMENTS, TESTS |
| DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
| DIN 30640-1:1975-05 | LETTERING ON TECHNICAL PRODUCTS - TYPE DESIGN |
| DIN 4788-3:1989-04 | GASBURNERS - AUTOMATIC SEQUENCE CONTROL - FLAME CONTROL DEVICES - CONCEPTS, SAFETY REQUIREMENTS, TESTING MARKING |
| DIN 3380:1973-12 | GAS PRESSURE REGULATORS FOR SUPPLY PRESSURES UP TO 100 BAR |
| DIN 3394-1:2004-05 | AUTOMATIC CONTROL VALVES - PART 1: PRESSURE RELIEF, SAFETY AND REGULATING VALVES FOR PRESSURE ABOVE 4 BAR UP TO 16 BAR |
| DIN 3362-3 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; TESTING |
| DIN 3535-2:1983-04 | SEALANTS FOR GAS SUPPLY; HOMOGENOUS ELASTOMERS FOR SEALANTS FOR DOMESTIC APPLIANCES; SAFETY REQUIREMENTS, TESTING |
| DIN 3398-2:1992-01 | PRESSURE SWITCHES FOR AIR AND FLUE GASES FOR FURNACE SYSTEMS - SAFETY REQUIREMENTS, TESTING |
| DIN 32726:1981-06 | REVOLUTION CONTROL DEVICES FOR COMBUSTION-AIR CONTROL IN FURNACES - SAFETY REQUIREMENTS AND TEST |
| DIN 3362-2 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; TEST GASES |
| DIN 4794-1:1980-12 | STATIONARY FAN-ASSISTED AIR HEATERS, WITH AND WITHOUT INTERCHANGE OF HEAT; COMMON REQUIREMENTS AND CONDITIONS FOR VENTILATION, TESTING |
| DIN 4794-3:1980-12 | STATIONARY FAN-ASSISTED AIR HEATERS; GAS FIRED AIR HEATERS WITH INTERCHANGE OF HEAT, REQUIREMENTS, TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.