DIN 4702-3:1990-03
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CENTRAL HEATING BOILERS; SPECIAL GAS BOILERS WITH ATMOSPHERIC BURNERS
Superseded date
01-06-2007
Superseded by
Published date
12-01-2013
1 Anwendungsbereich
2 Begriffe
3 Anforderungen
4 Prüfung
5 Kennzeichnung
6 Aufstellungs- und Betriebsanleitung
| DevelopmentNote |
Supersedes DIN 4702-101 (07/2002)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DIN 4751-2:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEG C - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 4751-1:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEGREE C - SPECIFICATION FOR OPEN SYSTEMS AND SEALED SYSTEMS WITH PRESSURISATION BY GRAVITY USING A COLUMN OF WATER OR BY SAFETY VALVES - SAFETY EQUIPMENT |
| DIN 4702-2:1990-03 | CENTRAL HEATING BOILERS, TEST CODE |
| DIN 4702-8:1990-03 | CENTRAL HEATING BOILER; DETERMINATION OF THE STANDARD EFFICIENCY AND THE STANDARD EMISSIVITY |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DIN 4751-3:1993-02 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 95 DEGREE C AND FORCED FLOW BOILERS WITH RATED OUTPUT UP TO 50 KW - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 4788-1:1977-06 | GAS BURNERS WITHOUT VENTILATION (ATMOSPHERIC GAS BURNERS) |
| DIN 30660:1999-12 | Sealing materials for gas and water supply as well as water heating systems - Non-hardening jointing compounds and polytetrafluoroethylene (PTFE) tapes for metallic threaded joints in domestic installations |
| DIN 3391:1996-11 | VALVES AND MULTIFUNCTIONAL CONTROLS FOR GASEOUS COMBUSTIBLES; SAFETY REQUIREMENTS OF GENERAL NATURE |
| DIN 1298:2015-08 | CHIMNEYS - CONNECTING FLUE PIPES FOR HEAT GENERATING SYSTEMS - METAL PIPES AND FITTINGS FOR FLUE GASES FROM DOMESTIC HEAT GENERATING SYSTEMS FOR OPERATION UNDER NEGATIVE PRESSURE CONDITIONS |
| DIN 3535-4:1978-08 | SEALS IN GAS SUPPLY; SEALS OF IT-PLATES FOR GAS VALVES, GAS APPLIANCES AND GAS PIPELINES |
| VDE 0722 : 1983 | ELECTRICAL EQUIPMENT OF NON-ELECTRICALLY HEATED COOKING AND HEATING APPLIANCES |
| DIN 4751-2:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEG C - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 40050:1980-07 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; PROTECTION OF ELECTRICAL EQUIPMENT AGAINST CONTACT, FOREIGN BODIES AND WATER |
| DIN 3398-1:1992-01 | PRESSURE SWITCHES FOR GAS - SAFETY REQUIREMENTS, TESTING |
| DIN 4751-4:1980-09 | SAFETY REQUIREMENTS FOR HEAT GENERATING INSTALLATIONS WITH FLOW TEMPERATURES UP TO 120 deg C; CLOSED WATER-HEATING PLANTS WITH THERMOSTATIC SAFETY REQUIREMENTS WITH A STATIC HEIGHT OF MORE THAN 15M OR HEAT-OUTPUT OF MORE THAN 350 KW |
| DIN 50016:1962-12 | TESTING OF MATERIALS, STRUCTURAL COMPONENTS AND EQUIPMENT; METHOD OF TEST IN DAMP ALTERNATING ATMOSPHERE |
| DIN 3392 : 1971 | GAS PRESSURE REGULATORS FOR GAS APPLIANCES |
| DIN 3362-1 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; DEFINITIONS, REQUIREMENTS, MARKING |
| DIN 6771-6:1988-04 | PRINTED FORMS FOR TECHNICAL DOCUMENTS; DRAWING SHEETS |
| DIN 30692 : 1980 | DIAPHRAGMS IN GAS APPLIANCES AND IN GAS DISTRIBUTION - REQUIREMENTS AND TESTS OF MATERIALS FOR DIAPHRAGMS WITHOUT WOVEN FABRIC INLAYS |
| DIN 3535-5:1993-12 | SEALANTS FOR GAS SUPPLY; SEALING MATERIALS OF RUBBER, CORK AND SYNTHETIC FIBRES FOR GAS ARMATURES AND GAS APPLIANCES; SAFETY REQUIREMENTS, TESTS |
| DIN 30661:1983-10 | SEALING MATERIALS FOR GAS SUPPLIES - HARDENING SEALING MATERIAL FOR THREAD JOINTS IN VALVES AND GAS APPLIANCES |
| DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
| TRD 402 : 1999 | EQUIPMENT OF STEAM BOILER PLANTS WITH HOT WATER GENERATORS OF GROUP 4 |
| DIN 30640-1:1975-05 | LETTERING ON TECHNICAL PRODUCTS - TYPE DESIGN |
| TRD 702 : 1998 | STEAM BOILER PLANTS WITH HOT WATER GENERATORS OF GROUP 2 |
| DIN 3536:1994-01 | LUBRICANTS FOR GAS VALVES IN INDOOR INSTALLATION, GAS DISTRIBUTION, AND GAS TRANSPORTATION PIPE LINES |
| DIN 4788-3:1989-04 | GASBURNERS - AUTOMATIC SEQUENCE CONTROL - FLAME CONTROL DEVICES - CONCEPTS, SAFETY REQUIREMENTS, TESTING MARKING |
| DIN 3380:1973-12 | GAS PRESSURE REGULATORS FOR SUPPLY PRESSURES UP TO 100 BAR |
| DIN 3850:1998-12 | COMPRESSION FITTINGS - SUMMARY |
| DIN 1451-1:1998-10 | LETTERING - LINEAR-ANTIQUA WITHOUT SERIFES - GENERAL |
| DIN 3258-1:1971-02 | FLAME CONTROL FOR GAS APPLIANCES - SAFETY-PILOTS |
| DIN 3394-1:2004-05 | AUTOMATIC CONTROL VALVES - PART 1: PRESSURE RELIEF, SAFETY AND REGULATING VALVES FOR PRESSURE ABOVE 4 BAR UP TO 16 BAR |
| DIN 4186-1 : 1968 | SCREENING SURFACES; ROUND METAL-WIRES, DIMENSIONS |
| DIN 3368-2:1989-03 | GAS APPLIANCES, CENTRAL HEATING BOILERS, COMBI-WATERHEATERS - REQUIREMENT, TESTING |
| DIN 4751-3:1993-02 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 95 DEGREE C AND FORCED FLOW BOILERS WITH RATED OUTPUT UP TO 50 KW - SPECIFICATION FOR SEALED SYSTEMS USING THERMOSTATIC CONTROL - SAFETY EQUIPMENT |
| DIN 3362-3 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; TESTING |
| TRD 801 : 1996 | STEAM BOILERS OF GROUP 1 |
| DIN 3535-2:1983-04 | SEALANTS FOR GAS SUPPLY; HOMOGENOUS ELASTOMERS FOR SEALANTS FOR DOMESTIC APPLIANCES; SAFETY REQUIREMENTS, TESTING |
| DIN 4702-1:1990-03 | BOILERS FOR CENTRAL HEATING, TERMS, REQUIREMENTS, TESTING, MARKING |
| DIN 3388-2:1979-09 | FLUE GAS DAMPERS OF HEATING PLANTS FOR LIQUID OR GASEOUS FUELS, MECHANICAL CONTROL DAMPERS; SAFETY REQUIREMENTS AND TEST |
| DIN 4702-8:1990-03 | CENTRAL HEATING BOILER; DETERMINATION OF THE STANDARD EFFICIENCY AND THE STANDARD EMISSIVITY |
| DIN 3362-2 : 1977 | GAS-APPLIANCES USING BURNERS WITHOUT BLOWER; TEST GASES |
| DIN 3394-2:1973-08 | SELF ADJUSTING VALVES OPERATED ON AUXILIARY ENERGY - REGULATING DEVICE WITH OR WITHOUT SHUTTING-OFF (ZERO-SHUT-OFF), CLASS R[M] AND R[O] |
| TRD 802 : 1998 | STEAM BOILERS OF GROUP 3 |
| DIN 3388-4:1984-12 | FLUE GAS DAMPERS FOR GAS APPLIANCES, THERMALLY CONTROLLED, CONNECTED TO THE APPLIANCES; REQUIREMENTS, TESTING, MARKING |
| DIN 3368-4:1982-09 | GAS-APPLIANCES - COMPLETING DETERMINATIONS FOR APPLIANCES FOR INSTANTANEOUS WATER HEATERS WITH AUTOMATIC ADAPTION OF EFFICIENCY |
| TRD 701 : 1997 | STEAM BOILER PLANTS WITH STEAM GENERATORS OF GROUP 2 |
| DIN 3258-2:1988-07 | FLAME SUPERVISION ON GAS APPLIANCES - AUTOMATIC FLAME SUPERVISION DEVICES - SAFETY REQUIREMENTS AND TESTING |
| DIN 4751-1:1994-10 | MEDIUM TEMPERATURE HOT WATER SYSTEMS (MTHWS) WITH A BOILER FLOW TEMPERATURE UP TO 120 DEGREE C - SPECIFICATION FOR OPEN SYSTEMS AND SEALED SYSTEMS WITH PRESSURISATION BY GRAVITY USING A COLUMN OF WATER OR BY SAFETY VALVES - SAFETY EQUIPMENT |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.