DIN 4108-4:2016-07 (Draft)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES
Available format(s)
Hardcopy , PDF
Superseded date
07-03-2021
Language(s)
German
Published date
01-01-2016
| DevelopmentNote |
Supersedes DIN 4108. (01/2005) Supersedes DIN V 4108-4. (02/2013)
|
| DocumentType |
Draft
|
| Pages |
44
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| Supersedes |
| DIN 1306:1984-06 | DENSITY - CONCEPTS, PRESENTATION OF VALUES |
| DIN HDBK 158/1 : 10ED 2014 | |
| DIN 18164-1:1992-08 | RIGID CELLULAR PLASTICS INSULATING BUILDING MATERIALS - THERMAL INSULATING MATERIALS |
| DIN 52619-3:1985-02 | TESTING OF THERMAL INSULATION; DETERMINATION OF THE THERMAL RESISTANCE AND THE THERMAL TRANSMISSION COEFFICIENT OF WINDOWS; DETERMINATION ON FRAMES |
| DIN 4701-2:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; TABLES, PICTURES, ALGORITHMS |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
| DIN 4108-3:1981-08 | HEAT INSULATION IN BUILDINGS - PROTECTION AGAINST MOISTURE CAUSED BY THE CLIMATE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-2:1981-08 | HEAT INSULATION IN BUILDINGS - HEAT INSULATION AND HEAT STORAGE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-4:1991-11 | THERMAL INSULATION IN BUILDINGS; CHARACTERISTIC VALUES RELATING TO THERMAL INSULATION AND PROTECTION AGAINST MOISTURE |
| DIN 4108-5:1981-08 | HEAT INSULATION IN BUILDINGS; CALCULATION METHODS |
| VDI 6030 Blatt 1:2002-07 | Designing free heating surfaces - Fundamentals - Designing of heating appliances |
| VDI 2050 Blatt 1.1:2017-07 | Requirements for technical equipment rooms - Space for service shafts |
| DIN 52611-1:1991-01 | TESTING OF THERMAL INSULATION; DETERMINATION OF THERMAL RESISTANCE OF STRUCTURAL COMPONENTS; LABORATORY TESTING |
| DIN 52612-2:1984-06 | TESTING OF THERMAL INSULATING MATERIALS; DETERMINATION OF THERMAL CONDUCTIVITY BY MEANS OF THE GUARDED HOT PLATE APPARATUS; CONVERSION OF THE MEASURED VALUES FOR BUILDING APPLICATIONS |
| DIN 4140:2014-04 | Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN 52619-2:1985-02 | TESTING OF THERMAL INSULATION; DETERMINATION OF THE THERMAL RESISTANCE AND THE THERMAL TRANSMISSION COEFFICIENT OF WINDOWS; DETERMINATION AN THE GLAZING |
| DIN 4701-1:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; BASIC RULES FOR CALCULATION |
| DIN 17615-1:1987-01 | ALMGSIO,5 PRECISION PROFILES - TECHNICAL DELIVERY CONDITIONS |
| DIN 18807-3:1987-06 | TRAPEZOIDAL SHEETING IN BUILDING - STEEL TRAPEZOIDAL SHEETING - STRENGTH ANALYSIS, STRUCTURAL DESIGN |
| DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
| DIN 4109-34:2016-07 | SOUND INSULATION IN BUILDINGS - PART 34: DATA FOR VERIFICATION OF SOUND INSULATION (COMPONENT CATALOGUE) - ADDITIONAL LAYERS FIXED TO SOLID STRUCTURAL ELEMENTS |
| DIN EN 13169:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| DIN EN 1996-2:2010-12 | Eurocode 6: Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (includes Corrigendum AC:2009) |
| DIN EN 13170:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN 10255:2015-05 (Draft) | Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methods; German and English version prEN 10255:2015 |
| DIN V 18151-100:2005-10 | LIGHTWEIGHT CONCRETE HOLLOW BLOCKS - PART 100: HOLLOW BLOCKS WITH SPECIFIC PROPERTIES |
| DIN V 18599-4:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 4: NET AND FINAL ENERGY DEMAND FOR LIGHTING |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| DIN EN 771-3:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
| DIN EN 15599-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
| DIN V 20000-403:2005-06 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 403: RULES FOR THE APPLICATION OF AGGREGATE CONCRETE MASONRY UNITS ACCORDING TO DIN EN 771-3:2005-05 |
| DIN EN 771-2:2015-11 | Specification for masonry units - Part 2: Calcium silicate masonry units (includes Amendment A1:2015) |
| DIN EN 13162:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 14308:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN EN 15037-2:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks (includes Amendment A1:2011) |
| DIN EN 12620:2015-07 (Draft) | AGGREGATES FOR CONCRETE |
| DIN 18180:2014-09 | GYPSUM PLASTERBOARDS - TYPES AND REQUIREMENTS |
| DIN EN 13950:2014-09 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN 4108-10:2015-12 | Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials - Factory made products |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| DIN 52129:2014-11 | UNCOATED BITUMEN SATURATED SHEETING - DEFINITION, DESIGNATION, REQUIREMENTS |
| DIN EN ISO 7345:1996-01 | THERMAL INSULATION - PHYSICAL QUANTITIES AND DEFINITIONS |
| DIN EN 1745:2012-07 | MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES |
| DIN EN ISO 12572:2015-01 (Draft) | HYGROTHERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 12572:2016) |
| DIN EN ISO 10211:2015-06 (Draft) | THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS (ISO 10211:2017) |
| DIN V 106:2005-10 | CALCIUM SILICATE UNITS WITH SPECIFIC PROPERTIES |
| DIN 20000-129:2014-10 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 129: RULES FOR THE APPLICATION OF CLAY BLOCKS ACCORDING TO DIN EN 15037-3:2011-07 |
| DIN EN 12433-1:2000-02 | Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors; Trilingual version EN 12433-1:1999 |
| DIN EN 998-1:2015-11 (Draft) | SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
| DIN 20000-402:2016-03 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 402: RULES FOR THE APPLICATION OF CALCIUM SILICATE MASONRY UNITS ACCORDING TO DIN EN 771-2:2015-11 |
| DIN 20000-401:2016-07 (Draft) | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 401: RULES FOR THE APPLICATION OF CLAY MASONRY UNITS ACCORDING TO DIN EN 771-1:2015-11 |
| DIN 18162:2000-10 | Lightweight concrete wallboards - unreinforced |
| DIN 18148:2000-10 | LIGHT WEIGHT CONCRETE HOLLOW-BOARDS |
| DIN EN 14307:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 14314:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 12664:2001-05 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products with medium and low thermal resistance; English version of DIN EN 12664 |
| DIN V 18153-100:2005-10 | CONCRETE MASONRY UNITS (NORMAL-WEIGHT CONCRETE) - PART 100: MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN 105-100:2012-01 | CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES |
| DIN EN ISO 6946:2015-06 (Draft) | BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHODS (ISO 6946:2017) |
| DIN EN 16069:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 771-4:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
| DIN EN 13241-1:2011-06 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - PRODUCT STANDARD - PART 1: PRODUCTS WITHOUT FIRE RESISTANCE OR SMOKE CONTROL CHARACTERISTICS |
| DIN EN 13164:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| DIN V 18152-100:2005-10 | LIGHTWEIGHT CONCRETE SOLID BRICKS AND BLOCKS - PART 100: SOLID BRICKS AND BLOCKS WITH SPECIFIC PROPERTIES |
| DIN EN 14309:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| DIN EN 13166:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods; German version EN 14963:2006 |
| DIN EN 14351-1:2010-08 | WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS |
| DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
| DIN EN 206:2014-07 | CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
| DIN EN ISO 13370:2015-06 (Draft) | THERMAL PERFORMANCE OF BUILDINGS - HEAT TRANSFER VIA THE GROUND - CALCULATION METHODS (ISO 13370:2017) |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 14318-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM DISPENSED SYSTEM BEFORE INSTALLATION |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| DIN EN 520:2009-12 | Gypsum plasterboards - Definitions, requirements and test methods (includes Amendment A1:2009) |
| DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
| DIN EN 13167:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| DIN 105-5:2013-06 | CLAY MASONRY UNITS - PART 5: LIGHTWEIGHT HORIZONTALLY PERFORATED CLAY MASONRY UNITS AND LIGHTWEIGHT HORIZONTALLY PERFORATED DAY MASONRY PANELS |
| DIN EN 13165:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| DIN EN 14315-1:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 1: SPECIFICATION FOR THE RIGID FOAM SPRAY SYSTEM BEFORE INSTALLATION |
| DIN EN 772-13:2000-09 | Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone); English version of DIN EN 772-13 |
| DIN EN 771-1:2015-11 | Specification for masonry units - Part 1: Clay masonry units; German version EN 771-1:2011+A1:2015 |
| DIN EN 13171:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| DIN 105-6:2013-06 | CLAY MASONRY UNITS - PART 6: HIGH PRECISION UNITS |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| DIN 4159:2014-05 | FLOOR BRICKS AND PLASTERBOARDS, STATICALLY ACTIVE |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| DIN EN 1279-5:2015-08 (Draft) | GLASS IN BUILDING - INSULATING GLASS UNITS - PART 5: EVALUATION OF CONFORMITY |
| DIN EN 12859:2011-05 | Gypsum blocks - Definitions, requirements and test methods |
| DIN EN 14064-1:2010-06 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| DIN EN ISO 9346:2008-02 | HYGROTHERMAL PERFORMANCE OF BUILDINGS AND BUILDING MATERIALS - PHYSICAL QUANTITIES FOR MASS TRANSFER - VOCABULARY |
| DIN EN 13168:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| DIN EN ISO 10077-1:2016-10 (Draft) | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL (ISO 10077-1:2017) |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 12207:2015-01 (Draft) | WINDOWS AND DOORS - AIR PERMEABILITY - CLASSIFICATION |
| DIN EN 15600-1:2010-12 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
| DIN EN 14319-1:2013-04 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation |
| DIN EN 410:2011-04 | Glass in building - Determination of luminous and solar characteristics of glazing |
| DIN EN 14306:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| DIN 20000-404:2015-12 | APPLICATION OF BUILDING PRODUCTS IN STRUCTURES - PART 404: RULES FOR THE APPLICATION OF AUTOCLAVED AERATED CONCRETE MASONRY UNITS ACCORDING TO DIN EN 771-4:2015-11 |
| DIN EN 13163:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN EN 13707:2013-12 | FLEXIBLE SHEETS FOR WATERPROOFING - REINFORCED BITUMEN SHEETS FOR ROOF WATERPROOFING - DEFINITIONS AND CHARACTERISTICS |
| DIN EN ISO 9229:2007-11 | THERMAL INSULATION - VOCABULARY |
| DIN EN 12086:2013-06 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.