DIN 202:1999-11
Current
Current
The latest, up-to-date edition.
SCREW THREADS - GENERAL PLAN
Available format(s)
Hardcopy , PDF
Language(s)
German, English
Published date
01-11-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
Änderungen
Frühere Ausgaben
1 Anwendungsbereich
2 Normative Verweisungen
3 Bezeichnung
Anhang A (normativ) - Literaturhinweise
This standard is included in DIN Handbook 1, 1 E, 6-2, 45 and 193. Gives an overview of screw threads used either in general purpose or in special applications, threads that comply with the DIN and ISO Standards defined in this document.
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN EN ISO 1478:1999-12 | Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999 |
| DIN 15403:1969-12 | LIFTING HOOKS FOR HOISTS; KNUCKLE THREADS |
| DIN 6063-2:2011-04 | Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions |
| LN 9163-11:1980-12 | Aerospace; ISO Metric Threads; Survey, designation in manufacturing documents |
| DIN 8140-2:2005-08 | WIRE THREAD INSERTS FOR ISO METRIC SCREW THREADS - PART 2: HELICAL COIL THREADS FOR INSERTS, THREAD TOLERANCES |
| DIN 7756:1979-02 | VALVES FOR VEHICLE TYRES; VALVE SCREW THREADS; THEORETICAL VALUES, LIMITING DIMENSIONS OF SCREW THREADS |
| ISO 5855-1:1999 | Aerospace MJ threads Part 1: General requirements |
| ISO 2903:2016 | ISO metric trapezoidal screw threads — Tolerances |
| ISO 68-2:1998 | ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads |
| DIN 405-2:1997-11 | GENERAL PURPOSE KNUCKLE THREADS - PART 2: DEVIATIONS AND TOLERANCES |
| DIN 513-1:1985-04 | METRIC BUTTRESS THREADS; THREAD PROFILES |
| LN 9163-3:1980-12 | Aerospace; ISO Metric Threads; Selection of threads and allowances for pipe and hose fittings |
| ISO 2904:1977 | ISO metric trapezoidal screw threads — Basic dimensions |
| ISO 965-5:1998 | ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing |
| DIN EN 144-1:2016-07 (Draft) | RESPIRATORY PROTECTIVE DEVICES - GAS CYLINDER VALVES - PART 1: THREAD CONNECTIONS FOR INSERT CONNECTOR |
| DIN 79012:2011-04 | Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions |
| DIN 20314:1990-06 | SCREW THREADS FOR DRILL TUBES WITH DIAMETERS EXCEEDING 100 MM FOR LARGE HOLE BORING IN MINING |
| DIN 20400:1990-01 | Knuckle threads for the mining; threads with large load-bearing depth |
| DIN 40400:1981-12 | EDISON THREAD FOR D-TYPE FUSES; LIMIT DIMENSIONS |
| LN 9163-7:1980-12 | Aerospace; ISO Metric Threads; Selection of threads and allowances for structural parts |
| DIN 79011:1960-10 | THREADS FOR CYCLES AND MOPEDS - SELECTION, APPLICATION |
| DIN EN 60061-1:2017-10 | LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS (IEC 60061-1:1969 + SUPPLEMENTS A:1970 TO V:1997 + A21:1998 TO A54:2016 + A55:2016, MODIFIED) |
| DIN 158-1:1997-06 | METRIC EXTERNAL TAPER SCREW THREADS AND MATING INTERNAL PARALLEL SCREW THREADS - PART 1: NOMINAL SIZES, LIMIT DEVIATIONS, LIMITS OF SIZE AND VERIFICATION |
| DIN 55525:1988-11 | PREFERRED THREADS FOR PLASTIC & GLASS CONTAINERS WITH UNIFIED SCREW CAP; BUTTRESS THREAD; DIMENSIONS |
| ISO 4570-3:1980 | Tyre valve threads Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1 |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| DIN 103-7:1972-10 | ISO METRIC TRAPEZOIDAL SCREW THREADS - LIMITING SIZES FOR BOLT THREADS FROM 8 TO 100 MM NOMINAL DIAMETER |
| ISO 6698:1989 | Cycles — Screw threads used to assemble freewheels on bicycle hubs |
| DIN 7273-1:1970-07 | KNUCKLE THREADS FOR STEEL SHEET PIECES UP TO 0.5 MM THICKNESS AND APPROPRIATED COUPLINGS; DIMENSIONS, TOLERANCES |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| DIN ISO 228-1:1994-12 | PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION |
| DIN 263-2:2000-03 | SINGLE- AND DOUBLE-START ACME THREAD WITH CLEARANCE FOR RAIL VEHICLES - PART 2: THREAD LIMITS AND LIMIT DEVIATIONS |
| DIN ISO 6698:2015-03 | CYCLES - SCREW THREADS USED TO ASSEMBLE FREEWHEELS ON BICYCLES HUBS (ISO 6698:1989) |
| DIN 513-2:1985-04 | METRIC BUTTRESS THREADS; GENERAL PLAN |
| ISO 5835:1991 | Implants for surgery Metal bone screws with hexagonal drive connection, spherical under-surface of head, asymmetrical thread Dimensions |
| DIN 2999-1:1983-07 | PIPE THREADS FOR TUBES AND FITTINGS - PARALLEL INTERNAL THREAD AND TAPER EXTERNAL THREAD - TREAD DIMENSIONS |
| DIN 49301:1985-06 | D-TYPE FUSES; WITHWORTH THREAD FOR SCREW-IN GAUGE RINGS D 2 AND D 3 |
| DIN 20401-2:1984-05 | BUTTRESS THREADS - 0,8 TO 2 MM PITCH - THREAD LIMITS |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 5864:1993 | ISO inch screw threads Allowances and tolerances |
| DIN 13-51:2013-10 | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 51: EXTERNAL SCREW THREADS FOR TRANSITION FITS (FORMER: SCREW THREADS FOR INTERFERENCE FIT) - TOLERANCES, LIMIT DEVIATIONS, LIMITS OF SIZES |
| DIN 2781:1990-09 | MACHINE TOOLS - BUTTRESS THREAD 45 DEGREE, SINGLE START, FOR HYDRAULIC PRESSES |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 965-4:1998 | ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing |
| DIN 20401-1:1984-05 | BUTTRESS THREADS - 0,8 TO 2 MM PITCH - NOMINAL DIMENSIONS |
| DIN 6602:1979-05 | TANK WAGONS; THREADED CONNECTIONS |
| ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
| DIN 14-2:1987-02 | ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - NOMINAL DIMENSIONS |
| DIN 13-2:1999-11 | ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm |
| DIN 6630:1985-08 | PACKAGING SCREW THREADS FOR SCREWING UP PROFILES; DESIGN PROFILES AND SIZES |
| ISO 2902:2016 | ISO metric trapezoidal screw threads General plan |
| DIN ISO 965-1:2017-05 | ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013) |
| ISO 4570-2:1979 | Tyre valve threads Part 2: Threads 9V1, 10V2, 12V1, 13V1 |
| LN 9163-5:1980-12 | Aerospace; ISO Metric Threads; Selection of threads and allowances for engines |
| ISO 8038:2013 | Microscopes Screw threads for objectives and related nosepieces |
| DIN 103-8:1972-10 | ISO METRIC TRAPEZOIDAL SCREW THREADS - LIMITING SCREW SIZES FOR BOLT THREADS FROM 105 TO 300 MM NOMINAL DIAMETER |
| DIN 58810:1984-03 | SURGICAL IMPLANTS; THREADS FOR BONE SCREWS AND NUTS |
| LN 9163-4:1980-12 | Aerospace; ISO Metric Threads; Selection of threads and allowances for operating elements |
| DIN 14-1:1987-02 | ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - BASIC PROFILE |
| DIN EN 962:2000-11 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
| ISO 725:2009 | ISO inch screw threads Basic dimensions |
| DIN 6063-1:2011-04 | Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| DIN EN 60399:2009-04 | BARREL THREAD FOR LAMPHOLDERS WITH SHADE HOLDER RING |
| DIN 13-52:2016-10 (Draft) | ISO GENERAL PURPOSE METRIC SCREW THREADS - PART 52: MULTI-START THREAD TOLERANCES AND DEVIATION OF PROFILE |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| DIN 405-1:1997-11 | GENERAL PURPOSE KNUCKLE THREADS - PART 1: PROFILES, NOMINAL SIZES |
| DIN 14-4:1987-02 | ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - LIMITS |
| DIN 7998:1975-02 | THREADS AND THREAD ENDS FOR WOOD SCREWS |
| DIN 14-3:1987-02 | ISO - METRIC SCREW THREAD - SCREW THREADS BELOW 1 MM DIAMETER - TOLERANCES |
| DIN 3182-1:1996-04 | RESPIRATORY PROTECTIVE DEVICES AND DIVING APPARATUS - STANDARD THREAD - PART 1: THEORETIC PROFILE |
| ISO 2901:2016 | ISO metric trapezoidal screw threads Basic and design profiles |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| ISO 1478:1999 | Tapping screws thread |
| LN 9163-10:1965-05 | Metric ISO-thread; conversion of previous manufacturing documents |
| DIN 263-1:2000-03 | SINGLE- AND DOUBLE-START ACME THREAD WITH CLEARANCE FOR RAIL VEHICLES - PART 1: DIMENSIONS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| DIN 30281:1981-07 | THREADS FOR RAIL VEHICLES - SUMMARY |
| ISO 4570-1:1977 | Tyre valve threads Part 1: Threads 5V1, 5V2, 6V1 and 8V1 |
| DIN 103-6:1972-10 | |
| DIN 513-3 : 1985-04 | METRIC BUTTRESS THREADS; DEVIATIONS AND TOLERANCES |
| ISO 3161:1999 | Aerospace — UNJ threads — General requirements and limit dimensions |
| ISO 263:1973 | ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0,06 to 6 in |
| DIN 58888:1979-07 | THREAD CONNECTION FOR MICROSCOPE OBJECTIVES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.