DIN 1313:1998-12
Current
Current
The latest, up-to-date edition.
QUANTITIES
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-1998
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Grössen
4 Einheiten von Grössen
5 Grössenarten
6 Grössensysteme und Dimensionen
7 Einheitensysteme
8 Komplexe, vektorielle und tensorielle Grössen
9 Gleichungen
10 Abhängige und abgeleitete Grössen
11 Merkmale
Anhang A (informativ) Literaturhinweise
This standard is included in DIN Handbook 22, 111 and 102.
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| DIN 1319-1:1995-01 | FUNDAMENTALS OF METROLOGY - PART 1: BASIC TERMINOLOGY |
| CEI EN 62419 : 2010 | CONTROL TECHNOLOGY - RULES FOR THE DESIGNATION OF MEASURING INSTRUMENTS |
| DIN 13303-1:1982-05 | STOCHASTICS; PROBABILITY THEORY, COMMON FUNDAMENTAL CONCEPTS OF MATHEMATICAL AND OF DESCRIPTIVE STATISTICS; CONCEPTS, SIGNS AND SYMBOLS |
| DIN EN ISO 80000-1:2013-08 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| DIN EN ISO 80000-8:2008-01 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
| EN 62419:2009 | Control technology - Rules for the designation of measuring instruments |
| DIN EN ISO 21078-2:2007-12 | DETERMINATION OF BORON(3) OXIDE IN REFRACTORY PRODUCTS - PART 2: ACID EXTRACTION METHOD FOR THE DETERMINATION OF BORON(3) OXIDE IN BINDER COMPONENTS |
| DIN EN ISO 21068-1:2008-12 | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) |
| DIN EN 1071-13:2010-07 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method |
| DIN 3960:1987-03 | DEFINITIONS, PARAMETERS AND EQUATIONS FOR INVOLUTE CYLINDRICAL GEARS AND GEAR PAIRS |
| DIN 1333:1992-02 | PRESENTATION OF NUMERICAL DATA |
| DIN HDBK 102 : 7ED 2008 | BUERO UND VERWALTUNG - NORMEN FUER PAPIERE, BRIEFE, TEXTVERARBEITUNG UND BUEROBEDARF |
| BS EN 62419:2009 | Control technology. Rules for the designation of measuring instruments |
| DIN 55350-11:2008-05 | Concepts for quality management - Part 11: Supplement to DIN EN ISO 9000:2005 |
| DIN EN ISO 26845:2008-06 | CHEMICAL ANALYSIS OF REFRACTORIES - GENERAL REQUIREMENTS FOR WET CHEMICAL ANALYSIS, ATOMIC ABSORPTION SPECTROMETRY (AAS) AND INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY (ICP-AES) METHODS |
| DIN 25007:1990-11 | RAIL VEHICLES - FORMULA SIGNS, UNITS, ABBREVIATION - SURVEY |
| DIN EN 1600:1997-10 | WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION |
| DIN EN 12534:1999-11 | WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION |
| DIN EN 12723:2000-09 | LIQUID PUMPS - GENERAL TERMS FOR PUMPS AND INSTALLATIONS - DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS |
| VDI/VDE 2040 Blatt 4:1996-09 (Draft) | Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes - Fluid properties |
| VDI/VDE 3519 Blatt 1:2002-10 | Level measurement of liquids and solids (bulk solids) |
| VDI/VDE 3699 Blatt 1:2015-04 | Process control using display screens - Terminology |
| VDI/VDE 2627 Blatt 1:2015-12 | Measuring rooms - Classification and characteristics - Planning and execution |
| VDI 3767:1997-10 | Characteristic noise emission values of technical sound sources - Machines for the forming of concrete blocks |
| DIN EN ISO 80000-4:2013-08 | QUANTITIES AND UNITS - PART 4: MECHANICS (ISO 80000-4:2006) |
| IEC PAS 62419:2005 | Control technology - Rules for the designation of measuring instruments |
| DIN EN 12536:2000-08 | WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| DIN 40041:1990-12 | DEPENDABILITY; CONCEPTS |
| DIN 53803-1:1991-03 | Sampling; statistical basis; one-way layout |
| DIN 1319-3:1996-05 | FUNDAMENTALS OF METROLOGY - PART 3: EVALUATION OF MEASUREMENTS OF A SINGLE MEASURE AND, MEASUREMENT CERTAINTY |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| DIN 1338:2011-03 | Writing and typesetting of formulae |
| DIN 1342-2:2003-11 | VISCOSITY - PART 2: NEWTONIAN LIQUIDS |
| DIN 55350-12:1989-03 | Concepts in the field of quality and statistics; concepts relating to characteristics |
| DIN 1301-1:2010-10 | Units - Part 1: Unit names, unit symbols |
| DIN 32991-1:1987-03 | COSTS INFORMATION - COSTS INFORMATION-DOCUMENTS - PRINCIPLES OF PRESENTATION |
| DIN HDBK 111 : 7ED 2013 | |
| DIN EN ISO 21078-1:2008-04 | Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008) |
| IEC 62419:2008 | Control technology - Rules for the designation of measuring instruments |
| DIN 461:1973-03 | GRAPHICAL REPRESENTATION IN SYSTEMS OF COORDINATES |
| 07/30169999 DC : DRAFT AUG 2007 | BS EN 62419 - CONTROL TECHNOLOGY - RULES FOR THE DESIGNATION OF MEASURING INSTRUMENTS |
| DIN 323-2:1974-11 | PREFERRED NUMBERS AND SERIES OF PREFERRED NUMBERS - INTRODUCTION |
| DIN EN 60495 : 1995 | SINGLE SIDEBAND POWER-LINE CARRIER TERMINALS |
| VDE 0850-2 : 1995 | SINGLE SIDEBAND POWER-LINE CARRIER TERMINALS |
| DIN HDBK 22 : 9ED 2009 | |
| DIN 5483-3:1994-09 | TIME-DEPENDENT QUANTITIES - PART 3: COMPLEX REPRESENTATION OF SINUSOIDAL TIME-DEPENDENT QUANTITIES |
| DIN ISO 8601:2006-09 | DATA ELEMENTS AND INTERCHANGE FORMATS - INFORMATION INTERCHANGE - REPRESENTATION OF DATES AND TIMES |
| DIN 1319-4:1999-02 | FUNDAMENTALS OF METROLOGY - PART 4: EVALUATION OF MEASUREMENTS - UNCERTAINTY OF MEASUREMENT |
| I.S. EN 62419:2009 | CONTROL TECHNOLOGY - RULES FOR THE DESIGNATION OF MEASURING INSTRUMENTS |
| DIN EN 29735:1994-02 | ELECTRONIC DATA INTERCHANGE FOR ADMINISTRATION, COMMERCE AND TRANSPORT (EDIFACT) - APPLICATION LEVEL SYNTAX RULES |
| DIN SPEC 4002-102:2011-05 | PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |
| DIN 1303:1987-03 | VECTORS, MATRICES, TENSORS - SYMBOLS AND CONCEPTS |
| DIN 5483-3:1994-09 | TIME-DEPENDENT QUANTITIES - PART 3: COMPLEX REPRESENTATION OF SINUSOIDAL TIME-DEPENDENT QUANTITIES |
| DIN 1338:2011-03 | Writing and typesetting of formulae |
| IEC 60027-1:1992 | Letters symbols to be used in electrical technology - Part 1: General |
| IEC 60027-3:2002 | Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units |
| DIN 13312:2005-02 | NAVIGATION - CONCEPTS, ABBREVIATIONS, LETTER SYMBOLS, GRAPHICAL SYMBOLS |
| DIN 1304 : 1978 | GENERAL SYMBOLS FOR USE IN FORMULAE |
| DIN 5485:1986-08 | PRINCIPLES OF TERMINOLOGY FOR PHYSICAL QUANTITIES - COMPOSITION OF TERMS WITH ADJECTIVES AND SUBSTANTIVES |
| DIN 5493:2013-10 | LOGARITHMIC QUANTITIES AND UNITS |
| DIN 461:1973-03 | GRAPHICAL REPRESENTATION IN SYSTEMS OF COORDINATES |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.