DEFSTAN 07-085(PT1)/4(2017) : 2017
Current
Current
The latest, up-to-date edition.
DESIGN REQUIREMENTS FOR WEAPONS AND ASSOCIATED SYSTEMS - PART 1: MANDATORY DESIGN REQUIREMENTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
28-11-2017
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FORWARD
INTRODUCTION
1 SCOPE
2 WARNING
3 NORMATIVE REFERENCES
4 COMPOSITION OF THE STANDARD
5 DEFINITIONS
6 UNITS
7 APPLICABILITY OF THE STANDARD
8 SYSTEM APPLICABILITY
9 SYSTEM DESIGN REQUIREMENTS
10 COMMON CHARACTERISTICS
11 DESIGN VERIFICATION AND CERTIFICATION
12 SYSTEM TYPES, SPECIAL REQUIREMENTS & APPLICABILITY
13 WEAPON SUB-SYSTEMS
14 STRUCTURES AND MATERIALS
15 ANCILLARY EQUIPMENT
ANNEX A - Definitions and Acronyms
ANNEX B - Normative And Informative References
Covers firstly the design requirements for Weapons and Associated Systems, for use in procurement and secondly those principal requirements of the design process supporting design certification.
| DevelopmentNote |
Supersedes DEFSTAN 07-85(PT1)/3(2006). (06/2018)
|
| DocumentType |
Standard
|
| Pages |
148
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| BS 381C:1996 | Specification for colours for identification, coding and special purposes |
| DEFSTAN 66-31(PT4)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 4: CONTRACTOR REQUIREMENTS - NAVAL USE APPLICATION |
| STANAG 4297 : 0 | GUIDANCE ON THE ASSESSMENT OF THE SAFETY AND SUITABILITY FOR SERVICE OF MUNITIONS FOR NATO ARMED FORCES - AOP-15 |
| AOP 39 : 2010 | GUIDANCE ON THE ASSESSMENT AND DEVELOPMENT OF INSENSITIVE MUNITIONS (IM) |
| DEFSTAN 66-31(PT7)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 7: GUIDANCE ON THE EVALUATION OF COMMERCIAL-OFF-THE-SHELF (COTS) TEST AND MEASUREMENT EQUIPMENT FOR AIR, LAND AND NAVAL APPLICATIONS |
| STANAG 3558 : 2002 | LOCATION OF ELECTRICAL CONNECTORS FOR AIRCRAFT STORES |
| STANAG 4224 : 2007 | LARGE CALIBRE ARTILLERY AND NAVAL GUN AMMUNITION GREATER THAN 40 MM, SAFETY AND SUITABILITY FOR SERVICE EVALUATION |
| AOP 32 : 0 | DEMOLITION MATERIEL - ASSESSMENT AND TESTING OF SAFETY AND SUITABILITY FOR SERVICE |
| DEFSTAN 05-65(PT2)/1(1993) : 1993 | NON-DESTRUCTIVE TESTING - PART 2: ULTRASONIC INSPECTION |
| STANAG 3605 : 0 | COMPATIBILITY OF ARMING SYSTEMS AND EXPENDABLE AIRCRAFT STORES |
| BS 5245:1975 | Specification for phosphoric acid based flux for soft soldered joints in stainless steel |
| DEFSTAN 66-31(PT5)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 5: CONTRACTOR REQUIREMENTS - LAND USE APPLICATION |
| BS CECC00015-1(1991) : AMD 7443 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: BASIC SPECIFICATION: PROTECTION OF ELECTROSTATIC SENSITIVE DEVICES - GENERAL REQUIREMENTS |
| BS 2C 13:1988 | Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series) |
| DEFSTAN 05-65(PT1)/2(1993) : 1993 | NON-DESTRUCTIVE TESTING - PART 1: RADIOGRAPHIC INSPECTION |
| STANAG 3104 : 2015 | IDENTIFICATION OF AIRCRAFT AND MISSILE PIPELINES AND ELECTRICAL CONDUITS |
| STANAG 4187 : 2007 | FUZING SYSTEMS - SAFETY DESIGN REQUIREMENTS |
| BS X 34:1992 | Specification for air drying, two component, polyurethane finish for aerospace purposes |
| DEFSTAN 13-102/3(2004) : 2004 | TESTING OF MATERIALS WHICH ARE REQUIRED TO BE COMPATIBLE WITH EXPLOSIVES |
| STANAG 4433 : 2001 | FIELD MORTAR MUNITIONS, DESIGN SAFETY REQUIREMENTS |
| DEFSTAN 05-123/1(1983) : 1983 | TECHNICAL PROCEDURES FOR THE PROCUREMENT OF AIRCRAFT, WEAPON AND ELECTRONIC SYSTEMS |
| DEFSTAN 00-088/3(2017) : 2017 | PACKAGING FOR AMMUNITION AND EXPLOSIVES |
| MIL-STD-1760 Revision E:2007 | AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM |
| DEFSTAN 13-92/3(1996) : 1996 | MANUFACTURE, INSPECTION AND PROOF OF ORDNANCE OF 20 MM CALIBRE AND OVER |
| STANAG 4147 : 0 | CHEMICAL COMPATIBILITY OF AMMUNITION COMPONENTS WITH EXPLOSIVES AND PROPELLANTS (NON-NUCLEAR APPLICATIONS) |
| STANAG 4338 : 0 | UNDERWATER-LAUNCHED MUNITIONS, SAFETY EVALUATION |
| STANAG 4333 : 0 | UNDERWATER MUNITIONS, PRINCIPLES FOR SAFE DESIGN |
| DEFSTAN 13-145/1(1994) : INTERIM | MECHANITE NO 14 |
| AOP 7 : 2006 | MANUAL OF DATA REQUIREMENTS AND TESTS FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| DEFSTAN 58-96/4(2006) : 2006 | PURE GASES FOR WEAPONS SYSTEMS AND DETECTOR COOLING APPLICATIONS |
| STANAG 4497 : 2016 | HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN |
| STANAG 4170 : 2008 | PRINCIPLES AND METHODOLOGY FOR THE QUALIFICATION OF EXPLOSIVE MATERIALS FOR MILITARY USE |
| STANAG 3635 : 0 | AIRCRAFT STORES SUSPENSION UNITS WITH GRAVITY RELEASE CAPABILITY |
| STANAG 3575 : 0 | AIRCRAFT STORES EJECTOR RACKS |
| DEFSTAN 66-31(PT1)/2(2008) : 2008 | BASIC REQUIREMENTS AND TESTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 1: INTRODUCTION AND GUIDE TO THE SPECIFICATION AND SELECTION OF TEST AND MEASUREMENT EQUIPMENT BY THE PROCURING AUTHORITY |
| DEFSTAN 66-31(PT3)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 3: CONTRACTOR REQUIREMENTS - AIR USE APPLICATION |
| STANAG 4370 : 2016 | ENVIRONMENTAL TESTING |
| STANAG 4368 : 2011 | IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS |
| STANAG 3726 : 1996 | BAIL (PORTAL) LUGS FOR THE SUSPENSION OF AIRCRAFT STORES |
| STANAG 4432 : 0 | AIR-LAUNCHED GUIDED MUNITIONS: PRINCIPLES FOR SAFE DESIGN |
| AOP 31 : 0 | DEMOLITION MATERIEL - DESIGN PRINCIPLES |
| STANAG 2828 : 2015 | MILITARY PALLETS, PACKAGES AND CONTAINERS |
| DEFSTAN 05-65/1(1984) : 1984 | RADIOGRAPHIC INSPECTION |
| DEFSTAN 61-21/3(2009) : 2009 | GENERAL SPECIFICATION FOR BATTERIES |
| STANAG 4225 : 0 | THE SAFETY EVALUATION OF MORTAR BOMBS |
| BS 2G 239:1992 | Specification for primary active lithium batteries for use in aircraft |
| SAE AMS 03-2 : 2017 | CLEANING AND PREPARATION OF METAL SURFACES |
| DEFSTAN 00-56/1(1991) : 1991 | HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT |
| STANAG 4439 : 2010 | POLICY FOR INTRODUCTION AND ASSESSMENT OF INSENSITIVE MUNITIONS (IM) |
| STANAG 2818 : 2002 | DEMOLITION MATERIEL: DESIGN, TESTING AND ASSESSMENTS |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| STANAG 3441 : 2007 | DESIGN OF AIRCRAFT STORES |
| BS EN 60825-1:2014 | Safety of laser products Equipment classification and requirements |
| STANAG 4518 : 0 | DEMILITARIZATION AND DISPOSAL OF MUNITIONS, PRINCIPLES FOR DESIGN FEATURES AND ASSESSMENT |
| DEFSTAN 05-57/5(2005) : 2005 | CONFIGURATION MANAGEMENT OF DEFENCE MATERIEL |
| STANAG 3576 : 2016 | ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT |
| DEFSTAN 00-970/1(1983) : 1983 | DESIGN REQUIREMENTS FOR SERVICE AIRCRAFT |
| STANAG 4396 : 2003 | SYMPATHETIC REACTION - MUNITION TEST PROCEDURES |
| STANAG 4488 : 2009 | EXPLOSIVES, SHOCK SENSITIVITY TESTS |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| DEFSTAN 66-31(PT6)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 6: REQUIREMENTS FOR GENERAL PURPOSE TME APPLICATIONS |
| DEFSTAN 66-31(PT2)/2(2008) : 2008 | BASIC REQUIREMENTS & TESTS FOR ELECTRONIC & ELECTRICAL TEST & MEASUREMENT EQUIPMENT - PART 2: CONTRACTOR GENERAL REQUIREMENTS |
| DEFSTAN 00-35/2(1996) : 1996 AMD 1 1997 | ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL |
| BS EN 61340-4-5:2004 | Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| BS EN 853:2015 | Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification |
| DEFSTAN 00-52/3(1991) : 1991 | THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES |
| STANAG 3786 : 0 | SAFETY DESIGN REQUIREMENTS AND GENERAL DESIGN GUIDANCE FOR AIRBORNE DISPENSER WEAPONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.