DEFSTAN 03-39/1(2008) : 2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
ELECTRODEPOSITION OF ZINC-COBALT ALLOYS
Hardcopy , PDF
31-03-2014
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Definitions
5.2 Process control schedule
5.3 Significant surface
5.4 Shot peening
5.5 Tensile strength of steels
5.5.2 Tensile strength/hardness relationship
6 Information to be Supplied by the Purchaser
7 Process Control
8 Process Requirements
8.1 Ferrous substrates
8.1.1 General
8.1.2 Heat treatment
8.1.3 Surface preparation
8.1.3.1 General requirements
8.1.3.2 Cleaning
8.1.3.3 Masking
8.1.3.4 Activation
8.1.4 Zinc-cobalt electrodeposition process
8.1.4.3 Coating composition
8.1.4.4 Coating thickness
8.1.5 Washing
8.1.6 Passivation
8.1.7 Post treatment
8.1.8 Post-electrodeposition heat treatment
8.2 Non-ferrous substrates
8.2.1 Preparation for electrodeposition
8.2.2 Electrodeposition of zinc-cobalt
8.2.3 Post-electrodeposition treatment
9 Inspection and Test
9.1 General procedure
9.2 Selection of test samples
9.3 Visual inspection
9.4 Adhesion
9.5 Thickness of coating
9.5.2 Local thickness
9.5.3 Average thickness
9.6 Salt spray test
9.7 Composition of coating
9.8 Treatment of items rejected during final inspection
and test
Annex A - Guidance on Zinc-Cobalt Electrodeposition
A.1 Introduction
A.2 Zinc Base Alloys
A.2.1 General
A.2.2 Corrosion behaviour of zinc alloy electrodeposits
on steel
A.3 Zinc-Cobalt ElectroDeposition
A.3.1 Basis Materials
A.3.2 Hydrogen embrittlement
A.3.3 Zinc-cobalt electrodeposition solutions
A.3.3.2 Acid electrodeposition baths
A.3.3.3 Alkaline electrodeposition baths
A.3.4 Process control
A.3.5 Corrosion behaviour of zinc-cobalt electrodeposits
Annex B - Zinc-Cobalt Electrodeposition Process
B.1 General
B.2 Electrodeposition Solution and Conditions Using an
Alkaline Bath
B.3 The Analysis of Zinc-Cobalt Electrodeposition Solution
B.3.2 Analysis of main constituents of alkaline zinc-cobalt
electrodeposition solution
B.3.2.1 Analysis of zinc and sodium hydroxide
B.3.2.2 Analysis of cobalt and iron
Annex C - Determination of Average Thickness of Zinc-Cobalt Coating
C.1 Solution
C.2 Method
C.3 Calculation
Annex D - Adhesion Tests
D.1 Burnishing Test
D.2 Bend Test
D.3 Scribe Test
Provides guidance for, and specifies the requirements for, the electrodeposition of zinc-cobalt alloy coatings on a range of metallic substrates for the provision of corrosion resistance to steel components and galvanic compatibility between some bi-metallic contacting surfaces.
| DevelopmentNote |
This standard is obsolescent because it is no longer required for the procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Withdrawn
|
| DEFSTAN 03-36/2(2010) : 2010 | GUIDANCE TO THE USE OF CADMIUM ALTERNATIVES IN THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| DEFSTAN 03-41/1(2008) : 2008 | TRIVALENT CHROMIUM PASSIVATION TREATMENTS FOR ELECTRODEPOSITED ZINC-BASE COATINGS |
| BS EN ISO 3543:2001 | Metallic and non-metallic coatings. Measurement of thickness. Beta backscatter method |
| BS EN ISO 6507-1:2005 | Metallic materials. Vickers hardness test Test method |
| BS EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| DEFSTAN 03-21/4(2008) : 2008 | MECHANICAL METHODS FOR THE INDUCEMENT OF RESIDUAL SURFACE COMPRESSIVE STRESSES |
| BS EN ISO 3497:2001 | Metallic coatings. Measurement of coating thickness. X-ray spectrometric methods |
| DEFSTAN 03-40/1(2008) : 2008 | ELECTRODEPOSITION OF ZINC-NICKEL ALLOYS |
| DEFSTAN 03-4/5(2006) : 2006 | THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA |
| BS ISO 9588:2007 | Metallic and other inorganic coatings. Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| DEFSTAN 03-41/1(2008) : 2008 | TRIVALENT CHROMIUM PASSIVATION TREATMENTS FOR ELECTRODEPOSITED ZINC-BASE COATINGS |
| BS EN ISO 2177:2004 | Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution |
| DEFSTAN 03-38/1(2007) : 2007 | GUIDANCE FOR THE USE OF ALTERNATIVES TO HEXAVALENT CHROMIUM FOR THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| DEFSTAN 03-2/4(2005) : 2005 | CLEANING AND PREPARATION OF METAL SURFACES |
| BS EN ISO 1463:2004 | Metallic and oxide coatings. Measurement of coating thickness. Microscopical method |
| BS EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method |
| BS EN ISO 9227:2017 | Corrosion tests in artificial atmospheres. Salt spray tests |
| DEFSTAN 03-36/1(2005) : 2005 | GUIDANCE TO THE USE OF CADMIUM ALTERNATIVES IN THE PROTECTIVE COATING OF DEFENCE EQUIPMENT |
| BS 6338:1982 | Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
| DEFSTAN 03-20/3(2005) : 2005 | ELECTRO-DEPOSITION OF ZINC |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.