DEFSTAN 02-862(PT2)/3(2011) : 2011
Current
Current
The latest, up-to-date edition.
NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
14-08-2011
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Warning
3 Normative References
4 Terms and definitions
5 Abbreviations
6 Carbon and Low Alloy Steels Fasteners
7 Stainless Steel Fasteners
8 Non-Ferrous Metal and Alloy Fasteners
9 Identification and Packaging
10 Quality Assurance
Annex A - Procurement Check List
Annex B - Proof Loads for Non-Ferrous Fasteners
Describes the requirements for the manufacture, testing and quality assurance documentation for ferrous (carbon/low alloy steel and stainless steels) and non-ferrous metric and unified fasteners for non-First Level applications.
| DevelopmentNote |
Supersedes DEFSTAN 02-862(PT2)/2(2007), DEFSTAN 02-862(PT4)/2(2007) and DEFSTAN 02-862(PT5)/2(2007). (08/2011) This standard is obsolescent because it is no longer required for procurement of new equipment but is retained for maintenance purposes in support of existing in-service equipment. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Current
|
| Supersedes |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| DEFSTAN 02-123(PT1)/3(2015) : 2015 | REQUIREMENTS FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 1: LAUNDRIES AND ASSOCIATED COMPARTMENTS |
| DEFSTAN 02-330/3(2013) : 2013 | REQUIREMENTS FOR MAIN PROPULSION PLANT CONDENSERS IN NUCLEAR POWERED SUBMARINES |
| DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
| DEFSTAN 02-304(PT3)/3(2020):2020 | Shafting Systems & Propulsors Part 03: Manufacturing and Detail Design Requirements for Propulsors |
| DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-375/2(2017) : 2017 | VALVE DESIGN AND MANUFACTURE |
| DEFSTAN 02-795/2(2016) : 2016 | REQUIREMENTS FOR HEALTH PHYSICS LABORATORIES AND RADIATION FACILITIES IN NUCLEAR SUBMARINES |
| DEFSTAN 02-303/3(2015) : 2015 | LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES |
| DEFSTAN 02-748/4(2017) : 2017 | REQUIREMENTS FOR STRAINERS IN HM SURFACE SHIPS AND SUBMARINES |
| BS 3643-1:2007 | ISO metric screw threads Principles and basic data |
| BS EN ISO 4762:2004 | Hexagon socket head cap screws |
| BS EN 10088-1:2014 | Stainless steels List of stainless steels |
| BS EN ISO 148-1:2016 | Metallic materials. Charpy pendulum impact test Test method |
| DEFSTAN 03-11/5(2008) : 2008 | PHOSPHATE TREATMENT OF IRON AND STEEL |
| BS 131-1:1961 | Methods for notched bar tests The Izod impact test on metals |
| BS 3073:1977 | Specification for nickel and nickel alloys: strip |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| ASTM B 265 : 2015 : REDLINE | Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
| DEFSTAN 02-833(PT1)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 1: SHEET, STRIP AND PLATE |
| ASTM B 575 : 2017 : REDLINE | Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
| BS EN ISO 4017:2014 | Fasteners. Hexagon head screws. Product grades A and B |
| BS EN ISO 4032:2012 | Hexagon regular nuts (style 1). Product grades A and B |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| DEFSTAN 02-835/1(2000) : 2000 | REQUIREMENTS FOR HIGH STRENGTH COPPER NICKEL MANGANESE ALLOY FORGINGS, FORGING STOCK RODS AND SECTIONS |
| BS 4439:1969 | Specification for screwed studs for general purposes. Metric series |
| BS 4929-1:1973 | Specification for steel hexagon prevailing-torque type nuts Metric series |
| DEFSTAN 02-729(PT4)/2(2004) : 2004 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 4: LIQUID PENETRANT |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 26157-1:1992 | Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements |
| BS 4929-2:1973 | Specification for steel hexagon prevailing-torque type nuts Unified (inch) series |
| DEFSTAN 02-136/3(2010) : 2010 | DESIGN POLICY, PRINCIPLES, TESTING AND ACCEPTANCE REQUIREMENTS FOR WATERTIGHT INTEGRITY OF SUBMARINES |
| BS EN ISO 1478:2000 | Tapping screw thread |
| DEFSTAN 02-729(PT5)/2(2006) : 2006 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS - PART 5: ULTRASONIC |
| DEFSTAN 02-833(PT2)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| BS 4183:1967 | Specification for machine screws and machine screw nuts. Metric series |
| BS EN 10302:2008 | Creep resisting steels, nickel and cobalt alloys |
| BS 1580-1:2007 | Unified screw threads Screw threads with diameters ¼ in and larger. Requirements |
| BS EN ISO 1580:2011 | Slotted pan head screws. Product grade A |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS 2693-1:1956 | Specification for screwed studs General purpose studs |
| BS EN ISO 7045:2011 | Pan head screws with type H or type Z cross recess. Product grade A |
| DEFSTAN 03-25/5(2008) : 2008 | SULFURIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN ISO 6892-1:2016 | Metallic materials. Tensile testing Method of test at room temperature |
| DEFSTAN 02-729(PT2)/2(2005) : 2005 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 2: MAGNETIC PARTICLE |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS 3692:2001 | ISO metric precision hexagon bolts, screws and nuts. Specification |
| BS EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| BS 2470:1973 | Specification for hexagon socket screws and wrench keys. Inch series |
| BS 3076:1989 | Specification for nickel and nickel alloys: bar |
| BS 3410:1961 | Specification for metal washers for general engineering purposes |
| DEFSTAN 02-729(PT3)/2(2005) : 2005 | REQUIREMENTS FOR NON-DESTRUCTIVE EXAMINATION METHODS IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS - PART 3: EDDY CURRENT |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| BS 4320:1968 | Specification for metal washers for general engineering purposes. Metric series |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.