DEFSTAN 02-802/1(2008) : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REQUIREMENTS FOR MINERAL WOOL PRODUCTS FOR ACOUSTIC AND THERMAL INSULATION
Hardcopy , PDF
31-07-2015
English
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
0 Introduction
1 Scope
2 Warning
3 Normative References
4 Definitions
5 Materials
6 Information to be supplied by the purchaser
7 Product conformity certification
8 Occupational health and safety assessment
9 Containers and marking of containers
Annex A - Specification for Mineral Wool Marine Board (MWMB)
A.1 Scope
A.2 Materials and manufacture
A.2.1 Mineral wool board
A.2.2 Method of manufacture
A.2.3 Dimensions and tolerances
A.2.4 Weight
A.2.5 Density
A.2.6 Freedom from Defects
A.3 Test requirements
A.4 Packaging and identification
A.4.1 Packaging
A.4.2 Identification
Annex B - Specification for Mineral Wool Acoustic Absorption
Liner (MWAA)
B.1 Scope
B.2 Materials and manufacture
B.2.1 Mineral wool acoustic absorption liner
B.2.2 Method of manufacture
B.2.3 Dimensions and tolerances
B.3 Test requirements
B.4 Packaging and identification
Annex C - Specification for Rock Wool Fire Protection Slabs
C.1 Scope
C.2 Materials and manufacture
C.2.1 Rock wool
C.2.2 Method of manufacture
C.2.3 Dimensions and tolerances
C.2.4 Density
C.3 Test requirements
C.4 Packaging and identification
Annex D - Specification for Rock Wool Half Pipe Sections
D.1 Scope
D.2 Material
D.3 Packaging and identification
Annex E - Specification for Mineral Wool Slabs 40 kg/m[3]
E.1 Scope
E.2 Materials and manufacture
E.2.1 Mineral (glass or rock) wool
E.2.2 Method of manufacture
E.2.3 Dimensions and tolerances
E.2.4 Weight
E.2.5 Density
E.2.6 Freedom from Defects
E.3 Test requirements
E.4 Packaging and identification
E.4.1 Packaging
E.4.2 Identification
Annex F - Specification for Rock Wool Mattresses for Gas
Turbine Uptakes
F.1 Scope
F.2 Materials and manufacture
F.2.1 Rock wool batt
F.2.2 Facing mesh
F.2.3 Method of manufacture
F.2.4 Dimensions and tolerances
F.2.5 Density of rock wool batt
F.2.6 Weights of rock wool mattresses
F.3 Test requirements
F.4 Packaging and identification
Annex G - Specification for Loose Rock Wool
G.1 Scope
G.2 Materials and manufacture
G.2.1 Material
G.2.2 Method of manufacture
G.3 Test requirements
G.4 Packaging and identification
G.4.1 Packaging
Annex H - Methods of Test
H.1 Percentage alkalinity as Na[2]O
H.2 Compression and recovery (Annex A and Annex E)
H.3 Puncture resistance (Annex A and Annex E)
H.4 Interlaminar adhesion
Annex I - Specifications for Facings, Backing and Adhesive
I.1 Glass Cloth Facing - Standard
I.1.1 Type
I.1.2 Specification
I.1.3 Breaking Strength
I.1.4 Ability to bend
I.2 Glass Cloth Facing - Lightweight
I.2.1 Type
I.2.2 Specification
I.2.3 Breaking Strength
I.3 Glass Tissue Backing - Lightweight
I.4 Adhesive
I.5 Freedom from Defects
I.6 Definitions - Glass Cloth Terms
Describes technical requirements for seven types of mineral wool products for acoustic and thermal insulation for applications on HM Ships and Submarines.
| DevelopmentNote |
Supersedes DEFSTAN 02-802(PT1)/1(2000), DEFSTAN 02-802(PT2)/1(2000), DEFSTAN 02-802(PT3)/1(2000), DEFSTAN 02-802(PT4)/1(2000), DEFSTAN 02-802(PT5)/1(2000), DEFSTAN 02-802(PT6)/1(2000) and DEFSTAN 02-802(PT7)/1(2000). (07/2008)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
UK Ministry of Defence Standards
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
| DEFSTAN 02-703/2(2011) : 2011 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| BS 476-4:1970 | Fire tests on building materials and structures Non-combustibility test for materials |
| BS 3958-3:1985 | Thermal insulating materials Metal mesh faced man-made mineral fibre mattresses |
| BS EN ISO 3696:1995 | Water for analytical laboratory use. Specification and test methods |
| BS 2972:1989 | Methods of test for inorganic thermal insulating materials |
| BS ISO 5893:2002 | Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification |
| DEFSTAN 02-713/2(2006) : 2006 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
| BS EN 12667:2001 | Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance |
| DEFSTAN 02-703/1(2000) : 2000 | THERMAL AND ACOUSTIC INSULATION OF HULL AND MACHINERY |
| BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
| BS EN ISO/IEC 17050-1:2010 | Conformity assessment. Suppliers declaration of conformity General requirements |
| BS EN ISO 354:2003 | Acoustics. Measurement of sound absorption in a reverberation room |
| DEFSTAN 02-711/2(2006) : 2006 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
| DEFSTAN 02-782/1(2000) : 2000 | REQUIREMENTS FOR ADHESIVE FOR MINERAL WOOL MARINE BOARD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.