DEFSTAN 02-303/3(2015) : 2015
Current
The latest, up-to-date edition.
LUBRICATING OIL SYSTEMS FOR PROPULSION AND GENERATION IN HM SURFACE SHIPS & SUBMARINES
Hardcopy , PDF
English
08-07-2015
Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Performance Specification
6 Requirements
7 Design Requirements/Guidance
Annex A - Normative References
Describes the general requirements for propulsion and generating lubricating oil systems in HM Surface Ships and HM Submarines.
DevelopmentNote |
Supersedes DEFSTAN 02-303/2(2010). (08/2015)
|
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Current
|
Supersedes |
DEFSTAN 02-329/4(2015) : 2015 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-748/3(2010) : 2010 | REQUIREMENTS FOR STRAINERS IN HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-359/1(2000) : 2000 | STANDARD VALVES - IMPERIAL (OBSOLESCENT - USE FOR SUPPORT AND MAINTENANCE PURPOSES ONLY) CATEGORY 3 |
DEFSTAN 05-10(PT2)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 2: DIGITAL PRODUCT DEFINITION INFORMATION |
DEFSTAN 02-155(PT1)/1(2000) : 2000 | REQUIREMENTS FOR STRUCTURAL PRACTICES IN STEEL SURFACE SHIPS - PART 1: GENERAL REQUIREMENTS |
DEFSTAN 02-833(PT2)/3(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE - PART 2: FORGINGS, FORGING STOCK, RODS AND SECTIONS |
DEFSTAN 05-42/2(1982) : 1982 | PARTICULATE CONTAMINATION CLASSES FOR FLUIDS IN HYDRAULIC SYSTEMS |
DEFSTAN 02-341(PT1)/1(2000) : 2000 | REQUIREMENTS FOR CLEANING OF ITEMS, COMPONENTS AND EQUIPMENT FOR FLUID SYSTEMS - PART 1: CLEANING CATEGORY 2 |
DEFSTAN 01-5/17(2011) : 2011 | FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS |
DEFSTAN 61-5(PT4)/4(2006) : 2006 | LOW VOLTAGE ELECTRICAL POWER SUPPLY SYSTEMS - QUALITY OF ELECTRICAL POWER SYSTEMS IN HM SHIPS |
API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
DEFSTAN 02-305/3(2010) : 2010 | REQUIREMENTS FOR GEARING - MAIN PROPULSION |
DEFSTAN 08-123/2(2012) : 2012 | REQUIREMENTS FOR DESIGN AND TESTING OF EQUIPMENTS TO MEET ENVIRONMENTAL CONDITIONS |
DEFSTAN 08-118(PT1)/1(2000) : 2000 | DESIGN GUIDE ON THE REDUCTION OF ACOUSTIC NOISE IN SURFACE SHIPS - CATEGORY 3 - PART 1: REDUCTION OF NOISE RADIATED UNDERWATER |
DEFSTAN 02-127/1(2000) : 2000 | ACCESS FITTINGS AND EQUIPMENT |
DEFSTAN 02-862(PT2)/3(2011) : 2011 | NAVAL FASTENERS - PART 2: PROCUREMENT OF NON-FIRST LEVEL FASTENERS |
DEFSTAN 91-74/2(2000) : 2000 | LUBRICATING OIL, STEAM TURBINE AND GEAR, EXTREME PRESSURE JOINT SERVICE DESIGNATION: OEP-80 |
DEFSTAN 02-878/1(2011) : 2011 | NON-FERROUS TUBES AND PIPES FOR USE IN HM SUBMARINES AND SURFACE SHIPS NOT IN CLASS |
DEFSTAN 02-345/2(2013) : 2013 | REQUIREMENTS FOR FLEXIBLE RUBBER PIPE ASSEMBLIES AND BELLOWS FOR USE IN SYSTEMS FROM VACUUM TO 20 BAR |
DEFSTAN 91-25/4(2002) : 2002 | LUBRICATING OIL, GEAR, NAVAL: LIGHT SERVICE NATO CODE: O-240 JOINT SERVICE DESIGNATION: OM-100 |
DEFSTAN 02-862(PT1)/3(2011) : 2011 | NAVAL FASTENERS - PART 1: MATERIAL SELECTION AND USE |
DEFSTAN 02-327/3(2006) : 2006 | REQUIREMENTS AND GUIDANCE FOR THE PROCUREMENT OF PUMPS FOR AUXILIARY SYSTEMS |
BS ISO 1219-1 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHICAL SYMBOLS AND CIRCUIT DIAGRAMS - PART 1: GRAPHICAL SYMBOLS FOR CONVENTIONAL USE AND DATA-PROCESSING APPLICATIONS |
DEFSTAN 02-747(PT3)/2(2011) : 2011 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 3: NICKEL ALUMINIUM BRONZE COMMERCIAL ALLOY INGOTS AND SAND CASTINGS |
DEFSTAN 02-322/3(2010) : 2010 | OIL AND BILGE WATER SHIPBOARD PROCESSING ARRANGEMENTS |
DEFSTAN 02-830/1(2010) : 2010 | REQUIREMENTS FOR GUNMETAL INGOTS AND CASTINGS |
DEFSTAN 05-10(PT1)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 1: HARDCOPY/MICROFORM PRODUCT DEFINITION INFORMATION |
DEFSTAN 80-97/5(2012) : 2012 | PAINT, SYSTEM, FOR THE INTERIOR OF BULK FUEL TANKS AND FITTINGS, MULTI-PACK |
BS EN 1982:2017 | Copper and copper alloys. Ingots and castings |
DEFSTAN 05-10(PT0)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 0: GENERAL INTRODUCTION TO PRODUCT DEFINITION INFORMATION |
DEFSTAN 02-323/3(2009) : 2009 | REQUIREMENTS FOR CENTRIFUGES |
ANEP-77 : 2017 | NAVAL SHIP CODE |
DEFSTAN 08-103(PT2)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - CATEGORY 2 - PART 2: REQUIREMENTS FOR SUBMARINES |
DEFSTAN 02-862(PT3)/3(2011) : 2011 | NAVAL FASTENERS - PART 3: PROCUREMENT OF FIRST LEVEL FASTENERS |
DEFSTAN 02-732/3(2009) : 2009 | THERMOMETERS, LIQUID-IN-GLASS EXPANSION TYPE AND THERMOMETER POCKETS |
DEFSTAN 02-329/3(2010) : 2010 | REQUIREMENTS FOR HEAT EXCHANGERS FOR HM SURFACE SHIPS AND SUBMARINES |
DEFSTAN 02-360/2(2001) : 2001 | GUIDANCE TO THE SELECTION OF LOW PRESSURE METRIC STANDARD VALVES |
DEFSTAN 02-302(PT1)/1(2000) : 2000 | REQUIREMENTS FOR MAINTENANCE ENVELOPES AND REMOVAL ROUTES - PART 1: SURFACE SHIPS CATEGORY 2 |
DEFSTAN 66-2/4(2003) : 2003 | GAUGES, PRESSURE, DIAL INDICATING (BOURDON TUBE TYPE) |
DEFSTAN 05-10(PT3)/6(2013) : 2013 | PRODUCT DEFINITION INFORMATION - PART 3: PRODUCT DEFINITION INFORMATION GUIDANCE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.