DEFSTAN 02-130/2(2012) : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS
Hardcopy , PDF
28-05-2022
English
01-01-2012
Foreword
1 Scope
2 Warning
3 Normative References
4 Abbreviations
5 Materials
6 Location of Linings
7 Emergency Operating Stations (EOS)
8 Installation
Annex A - Normative References
Annex B - Statement of Requirements for
Quick Release Lining Panels
Describes the material and installation requirements for decorative and quick release linings in Surface Ships and Submarines that are to be used in the following spaces: 1) Medical and Dental Organizations; 2) Accommodation; 3) WC's, Urinals, Bathrooms and Washing Facilities; 4) Galleys and Associated Spaces.
DevelopmentNote |
Supersedes DEFSTAN 02-130/1(2007). (02/2012)
|
DocumentType |
Standard
|
Pages |
18
|
PublisherName |
UK Ministry of Defence Standards
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
DEFSTAN 02-121(PT1)/4(2017) : 2017 | REQUIREMENTS FOR GALLEYS AND ASSOCIATED SPACES (CATEGORY 2) - PART 1: COMMON REQUIREMENTS |
DEFSTAN 02-795/2(2016) : 2016 | REQUIREMENTS FOR HEALTH PHYSICS LABORATORIES AND RADIATION FACILITIES IN NUCLEAR SUBMARINES |
DEFSTAN 02-125/4(2015) : 2015 | REQUIREMENTS FOR NAAFI COMPARTMENTS IN HM SURFACE SHIPS AND SUBMARINES |
BS EN 438-5:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
DEFSTAN 08-160/1(2003) : 2003 | REQUIREMENTS FOR ELECTRICAL INSTALLATIONS - CATEGORY 2 |
BS EN 438-3:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
IMO IE110 : 2009 | SOLAS (CONSOLIDATED EDITION) |
BS EN 438-4:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for compact laminates of thickness 2 mm and greater |
DEFSTAN 02-713/2(2006) : 2006 | DETERMINATION OF THE TOXICITY INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
BS EN 438-1:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
BS EN 485-4:1994 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on shape and dimensions for cold-rolled products |
BS EN 573-1:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Numerical designation system |
DEFSTAN 07-247(PT1)/3(2009) : 2009 | THE SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS - PART 1: SELECTION OF MATERIALS ON THE BASIS OF THEIR FIRE CHARACTERISTICS |
DEFSTAN 02-711/3(2012) : 2012 | DETERMINATION OF THE SMOKE INDEX OF THE PRODUCTS OF COMBUSTION FROM SMALL SPECIMENS OF MATERIALS |
BS EN 573-2:1995 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system |
BS 476-6(1989) : 1989 | FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 6: METHOD OF TEST FOR FIRE PROPAGATION FOR PRODUCTS |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS EN 485-3:2003 | Aluminium and aluminium alloys. Sheet, strip and plate Tolerances on dimensions and form for hot-rolled products |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
BS 476-12:1991 | Fire tests on building materials and structures Method of test for ignitability of products by direct flame impingement |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 438-7:2005 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.