DD CEN/TS 15718:2011
Current
The latest, up-to-date edition.
Railway applications. Wheelsets and bogies. Product requirements for cast wheels
Hardcopy , PDF
English
30-09-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Product definition
Annex A (normative) - Hydrogen control at the
point of steel melt for monobloc wheels
Annex B (informative) - Example of a test
method for the determination of fatigue
characteristics
Annex C (informative) - Strain gauge method for
determining the variation of circumferential
residual stresses located deep under the
tread (destructive method)
Annex D (informative) - Product qualification
Annex E (informative) - Product delivery
Bibliography
Describes the characteristics of cast railway wheels for use on European networks.
| Committee |
RAE/3/-/1
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This technical standard specifies the characteristics of cast railway wheels for use on European networks.
Two steel grades, C ER7 and C ER8, are defined in this Technical Specification. For tread-braked wheels; only C ER7 is used.
This Technical Specification is applicable to cast wheels which have a chilled rim. The standard is only applicable to cast wheels that have satisfied the technical approval procedure according to CEN/TS 13979-2.
This Technical Specification applies only to wheels used in freight wagon applications for speeds up to and including 120 km/h.
| Standards | Relationship |
| CEN/TS 15718:2011 | Identical |
| BS 5892-7:2014 | Railway rolling stock materials Specification for product and technical approval requirements for cast wheels |
| 14/30236255 DC : 0 | BS 5892-7 - RAILWAY ROLLING STOCK MATERIALS - PART 7: SPECIFICATION FOR PRODUCT AND TECHNICAL APPROVAL REQUIREMENTS FOR CAST WHEELS |
| ISO 6506-3:2014 | Metallic materials Brinell hardness test Part 3: Calibration of reference blocks |
| CR 10261 : 1995 | ECISS INFORMATION CIRCULAR 11 - IRON AND STEEL - REVIEW OF AVAILABLE METHODS OF CHEMICAL ANALYSIS |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| NFA 03 405 : 1991 FD | METAL PRODUCTS - FATIGUE TESTING - DATA STATISTICAL PROCESSING |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 5948:1994 | Railway rolling stock material Ultrasonic acceptance testing |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| SAE J 827 : 2013 | HIGH-CARBON CAST-STEEL-SHOT |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 6933:1986 | Railway rolling stock material — Magnetic particle acceptance testing |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| EN ISO 6506-3:2014 | Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014) |
| CEN/TS 13979-2:2011 | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 2: Cast wheels |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 13262:2004+A2:2011 | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
| ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| SAE J 444 : 2012 | CAST SHOT AND GRIT SIZE SPECIFICATIONS FOR PEENING AND CLEANING |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.