CSA Z8836 : 2011 : FR
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SUCTION CATHETERS FOR USE IN THE RESPIRATORY TRACT
Hardcopy , PDF
09-08-2021
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for open and closed suction
catheters
5 Specific requirements for open and closed suction
catheters
6 Materials
7 Design
8 Performance requirements
9 Requirements for suction catheters supplied sterile
10 Marking
Annex A (informative) - Rationale
Annex B (normative) - Test method for security of
attachment
Annex C (normative) - Measurement of residual vacuum
Annex D (normative) - Method of testing leakage
Annex E (informative) - Hazard identification for risk
assessment
Bibliography
Defines requirements for suction catheters, including closed suction catheters, made of flexible materials and intended for use in suctioning of the respiratory tract.
| DocumentType |
Standard
|
| Pages |
30
|
| ProductNote |
Reconfirmed F
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 15223-2:2010 | Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation |
| EN 15986:2011 | Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10079-1:2015 | Medical suction equipment Part 1: Electrically powered suction equipment |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| ISO 10079-2:2014 | Medical suction equipment Part 2: Manually powered suction equipment |
| ISO 5366-1:2000 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 5366-3:2001 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 3: Paediatric tracheostomy tubes |
| ISO 10079-3:2014 | Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
| ISO 5361:2016 | Anaesthetic and respiratory equipment — Tracheal tubes and connectors |
| ISO/TR 11991:1995 | Guidance on airway management during laser surgery of upper airway |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 594-2:1998 | Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
| ASTM F 640 : 2012 : REDLINE | Standard Test Methods for Determining Radiopacity for Medical Use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.