CSA ISO TR 14969 : 2005 : R2015
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS - GUIDANCE ON THE APPLICATION OF ISO 13485:2003
Hardcopy , PDF
19-06-2020
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Quality management system
5 Management responsibility
6 Resource management
7 Product realization
8 Measurement, analysis and improvement
Annex A (informative) - Terms used in certain regulatory
administrations to describe documents referenced in
this Technical Report
Annex B (informative) - Analysis of significant changes from
ISO 13485:1996 to ISO 13485:2003
Bibliography
Gives guidance for the application of the requirements for quality management systems contained in ISO 13485.
| DocumentType |
Standard
|
| Pages |
90
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| ISO/TR 14969:2004 | Identical |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 14644-6:2007 | Cleanrooms and associated controlled environments Part 6: Vocabulary |
| ISO 14644-8:2013 | Cleanrooms and associated controlled environments Part 8: Classification of air cleanliness by chemical concentration (ACC) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 14644-5:2004 | Cleanrooms and associated controlled environments — Part 5: Operations |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| EN 724 : 1994 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR NON-ACTIVE MEDICAL DEVICES |
| ISO 14155-1:2003 | Clinical investigation of medical devices for human subjects Part 1: General requirements |
| ISO 10005:2005 | Quality management systems Guidelines for quality plans |
| ISO/TR 16142:2006 | Medical devices Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices |
| ISO/TS 13409:2002 | Sterilization of health care products Radiation sterilization Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| ISO/TR 10013:2001 | Guidelines for quality management system documentation |
| ISO 14644-7:2004 | Cleanrooms and associated controlled environments — Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) |
| EN 50103 : 1995 | GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 928 : 1995 | IN VITRO DIAGNOSTIC SYSTEMS - GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR IN VITRO DIAGNOSTIC MEDICAL DEVICES |
| ISO 11607:2003 | Packaging for terminally sterilized medical devices |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| ISO 11134:1994 | Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| ISO 10007:2017 | Quality management — Guidelines for configuration management |
| EN 980:2008 | Symbols for use in the labelling of medical devices |
| ISO 13683:1997 | Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities |
| ISO 12891-1:2015 | Retrieval and analysis of surgical implants Part 1: Retrieval and handling |
| ISO 15223:2000 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.