CSA C22.2 No. 62560 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS
Hardcopy , PDF
04-08-2021
English
01-12-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements and general test requirements
5 Marking
6 Interchangeability
7 Protection against accidental contact with live parts
8 Insulation resistance and electric strength after humidity
treatment
9 Mechanical strength
10 Cap temperature rise
11 Resistance to heat
12 Resistance to flame and ignition
13 Fault conditions
14 Creepage distances and clearances
15 Abnormal operation
16 Test conditions for dimmable lamps
17 Photobiological safety
18 Ingress protection
19 Information for luminaire design
Annex A (informative) - Information for luminaire design
Annex CA (normative) - Additional requirements for
self-ballasted LED lamps intended for direct
replacement of high intensity discharge (HID)
lamps
Bibliography
This Standard applies to industrial electrical machinery comprising interconnected mechanical, electrical, or electronic industrial equipment operating in a coordinated manner.
| DocumentType |
Standard
|
| ISBN |
978-1-4883-0660-0
|
| Pages |
193
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy |
| ANSI C82.5 : 2016 | LAMP BALLASTS - HIGH-INTENSITY DISCHARGE AND LOW-PRESSURE SODIUM LAMPS |
| IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| IEC 60061-3:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| C22.2 NO. 1993-17 | Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
| IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
| ANSI C78.389-2004 (R2009) | American National Standard for Electric Lamps—High-Intensity Discharge (HID)—Methods of Measuring Characteristics |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| IEC TS 62504:2011 | General lighting - LEDs and LED modules - Terms and definitions |
| IEC 60061-2:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| ANSI C81.61 : 2017 | ELECTRIC LAMP BASES - SPECIFICATIONS FOR BASES (CAPS) FOR ELECTRIC LAMPS |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
| ANSI C78.380 : 2016 | ELECTRIC LAMPS - HIGH-INTENSITY DISCHARGE LAMPS - METHOD OF DESIGNATION |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| IEC 61199:2011+AMD1:2012+AMD2:2014 CSV | Single-capped fluorescent lamps - Safety specifications |
| ANSI C78.40 : 2016 | ELECTRIC LAMPS: SPECIFICATIONS FOR MERCURY LAMPS |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
| IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
| IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| ANSI C78.44:2016 | American National Standard for Electric Lamps—Double-Ended Metal Halide Lamps |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| CSA C22.2 No. 62031 : 2013(R2018) | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
| IEC 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| ANSI C81.63 : 2007(R2014) | GAUGES FOR ELECTRIC LAMP BASES AND LAMPHOLDERS |
| ANSI C78.43 : 2013 | ELECTRIC LAMPS - SINGLE-ENDED METAL HALIDE LAMPS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.