CR ISO 15608 : 2000
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
Superseded date
01-10-2005
Superseded by
Published date
01-01-2000
Publisher
1 Scope
2 Grouping system for steels
3 Grouping system for aluminium and aluminium alloys
4 Grouping system for copper and copper alloys
5 Grouping system for nickel and nickel alloys
6 Grouping system for titanium and titanium alloys
7 Grouping system for zirconium and zirconium alloys
8 Grouping system for cast irons
Annex A - New numbering system - Details of the standards
dealing with specification and approval of welding
procedures
Provides a uniform system for grouping materials for welding purposes. May also apply for other purposes as heat treatment, forming and non destructive testing. Covers the following standardized materials: steel; aluminium and its alloys; nickel and its alloys; copper and its alloys; titanium and its alloys; zirconium and its alloys and cast irons.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO/TR 15608:2017 | Identical |
| PD CR ISO 15608:2000 | Identical |
| SN CR ISO 15608 : 2000 | Identical |
| UNE-CR ISO 15608:2003 | Identical |
| I.S. EN ISO 15611:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE |
| DIN EN 1011-2:2001-05 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
| DIN EN ISO 15612:2016-09 (Draft) | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| I.S. EN 1011-3:2000 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| I.S. EN ISO 15612:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| BS EN 1011-6:2005 | Welding. Recommendations for welding of metallic materials Laser beam welding |
| I.S. EN ISO 15609-1:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| UNI EN ISO 15609-1 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| DIN EN 1011-5:2003-10 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 5: WELDING OF CLAD STEEL |
| DIN EN 14532-1:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| BS EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Arc welding of titanium, zirconium and their alloys |
| BS EN 1011-7:2004 | Welding. Recommendations for welding of metallic materials Electron beam welding |
| EN 1011-5:2003 | Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steel |
| EN 1011-7:2004 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| I.S. EN 12284:2003 | REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING |
| EN 12693:2008 | Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
| PD CEN/TR 13445-101:2015 | Unfired pressure vessels. Example of application |
| I.S. EN ISO 15613:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
| 03/115225 DC : DRAFT SEP 2003 | BS EN 1011-6 - WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| BS EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure |
| BS EN 12693:2008 | Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
| DIN EN 12284:2004-01 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN 1011-7:2004-10 | Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding |
| DIN EN 1011-6:2006-03 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| BS EN 14532-1:2004 | Welding consumables. Test methods and quality requirements Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN 1011-5:2003 | Welding. Recommendations for welding of metallic materials Welding of clad steel |
| I.S. EN 764-4:2014 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| UNI EN ISO 15613 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PRE-PRODUCTION WELDING TEST |
| UNI EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| BS PD EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDIZED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| 02/710860 DC : DRAFT SEP 2002 | BS EN 14532-3 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| 04/30118252 DC : DRAFT AUG 2004 | EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS |
| 05/30114218 DC : DRAFT FEB 2005 | EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
| I.S. EN ISO 15609-2:2002 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
| DIN EN 14532-2:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| DIN EN ISO 15609-1:2005-01 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| DIN EN ISO 17642-3:2005-09 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| UNE-EN 764-4:2015 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| BS EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test |
| EN 1011-6:2005 | Welding - Recommendation for welding of metallic materials - Part 6: Laser beam welding |
| EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| EN 14532-3:2004 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003) |
| UNI EN ISO 15614-5 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
| UNI EN ISO 9606-2 : 2006 | Qualification test of welders - Fusion welding - Part 1: Aluminium and aluminium alloys |
| I.S. EN ISO 15614-4:2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 4: FINISHING WELDING OF ALUMINIUM CASTINGS |
| 04/19989519 DC : DRAFT AUG 2004 | BS EN ISO 15614-7 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 7: OVERLAY WELDING |
| AWS D14.8M:2009 | STANDARD METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| I.S. EN ISO 15610:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES |
| 00/716910 DC : DRAFT NOV 2000 | BS EN ISO 15614-2 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 2: ARC WELDING OF ALUMINIUM AND ITS ALLOYS |
| 02/710858 DC : DRAFT SEP 2002 | BS EN 14532-1 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 1: PRIMARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| 02/710859 DC : DRAFT SEP 2002 | BS EN 14532-2 - WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 2: SUPPLEMENTARY METHODS AND CONFORMITY ASSESSMENT OF CONSUMABLES FOR STEEL, NICKEL AND NICKEL ALLOYS |
| I.S. EN 12693:2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| BS EN ISO 15609-2:2001 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Gas welding |
| DIN EN 12693:2016-10 (Draft) | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
| I.S. EN 1011-6:2006 | WELDING - RECOMMENDATION FOR WELDING OF METALLIC MATERIALS - PART 6: LASER BEAM WELDING |
| DIN EN 14532-3:2005-02 | WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS |
| BS EN 12284:2003 | Refrigerating systems and heat pumps. Valves. Requirements, testing and marking |
| ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 5: Arc welding of titanium, zirconium and their alloys |
| BS EN 14532-2:2004 | Welding consumables. Test methods and quality requirements Supplementary mekthods and conformity assessment of consumables for steel, nickel and nickel alloys |
| BS EN ISO 9606-2:2004 | Qualification test of welders. Fusion welding Aluminium and aluminium alloys |
| BS EN ISO 15618-2:2002 | Qualification testing of welders for under-water welding Diver-welders and welding operators for hyperbaric dry welding |
| ISO/TR 17844:2004 | Welding Comparison of standardised methods for the avoidance of cold cracks |
| BS EN 764-4:2014 | Pressure equipment Establishment of technical delivery conditions for metallic materials |
| BS EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials. Cold cracking tests for weldments. Arc welding processes Externally loaded tests |
| BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
| ISO 15613:2004 | Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
| ISO 15618-2:2001 | Qualification testing of welders for underwater welding — Part 2: Diver-welders and welding operators for hyperbaric dry welding |
| ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| BS EN 14532-3:2004 | Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| DIN EN ISO 15610:2004-02 | Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003) |
| EN ISO 15618-2:2001 | Qualification testing of welders for under-water welding - Part 2: Diver-welders and welding operators for hyperbaric dry welding (ISO 15618-2:2001) |
| EN 14532-1:2004 | Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN 14532-2:2004 | Welding consumables - Test methods and quality requirements - Part 2: Supplementary methods and conformity assessment of consumables for steel, nickel and nickel alloys |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| EN ISO/TR 17844 : 2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| EN ISO 15614-5:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| I.S. EN ISO 9606-2:2005 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS |
| 02/701811 DC : DRAFT FEB 2002 | BS EN 1011-7 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 7: ELECTRON BEAM WELDING |
| 11/30254165 DC : 0 | BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| UNI EN ISO 15612 : 2006 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| S.R. CEN/TR 13445-101:2015 | UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION |
| I.S. CEN ISO TR 17844:2004 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| UNI CEN ISO/TR 17844 : 2012 | WELDING - COMPARISON OF STANDARDISED METHODS FOR THE AVOIDANCE OF COLD CRACKS |
| BS EN 1011-3:2000 | Welding. Recommendations for welding of metallic materials Arc welding of stainless steels |
| DIN EN 1011-3:2001-01 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC - MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
| PREN 10088-1 : DRAFT 2011 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| CEN/TR 13445-101:2015 | Unfired pressure vessels - Example of application |
| DIN EN 764-4:2015-03 | PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS |
| DIN EN ISO 9606-2:2005-03 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004 |
| BS EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials. Welding procedure specification Arc welding |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| BS EN ISO 15611:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience |
| BS EN 1011-4:2000 | Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
| ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
| BS EN 1011-2:2001 | Welding. Recommendations for welding of metallic materials Arc welding of ferritic steels |
| DIN EN 12693:2008-09 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| EN 12284:2003 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| DIN EN ISO 15614-5:2004-07 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2004) |
| DIN EN ISO 15618-2:2002-04 | APPROVAL TESTING OF WELDERS FOR UNDER-WATER WELDING - PART 2: DIVER-WELDERS AND WELDING OPERATORS FOR HYPERBARIC DRY WELDING |
| DIN EN ISO 15613:2004-09 | Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004) |
| DIN EN ISO 15611:2004-03 | Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003) |
| I.S. EN ISO 15614-5:2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 5: ARC WELDING OF TITANIUM, ZIRCONIUM AND THEIR ALLOYS |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.