CEN/TS 15480-1:2012
Current
The latest, up-to-date edition.
Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics
31-10-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 ECC requirements for citizen identification using
physical means
6 ECC physical characteristics
7 Electrical characteristics
8 Transport protocols
9 Terminal characteristics
Annex A (informative) - Recommendations for the
layout of the ECC
Bibliography
This Technical Specification specifies Electronic Citizen Card (ECC) requirements. The requirements described in this Technical Specification are used to:1)define a plastic body card with associated physical and logical securities;2)specify the electrical interface and data transport protocols for the ECC;3)support the basic set of identification and authentication elements visible at the card surface;4)provide guidance for the specification of the ECC Durability.In addition to the above requirements, Informative Annex A in this document recommends different Physical Layouts for the ECC for two scenarios:-when the ECC is issued to act as a travelling document;-when the ECC is not issued to act as a travelling document.
| Committee |
CEN/TC 224
|
| DocumentType |
Technical Specification
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NEN NPR CEN/TS 15480-1 : 2012 | Identical |
| PD CEN/TS 15480-1:2012 | Identical |
| UNI CEN/TS 15480-1 : 2012 | Identical |
| DIN CEN/TS 15480-1;DIN SPEC 91130-1:2013-01 | Identical |
| PKN CEN/TS 15480-1 : 2007 | Identical |
| DD CEN/TS 15480-1:2007 | Identical |
| S.R. CEN/TS 15480-1:2012 | Identical |
| S.R. CEN/TS 15480-5:2013 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 5: GENERAL INTRODUCTION |
| CEN/TS 15480-4:2012 | Identification card systems - European Citizen Card - Part 4: Recommendations for European Citizen Card issuance, operation and use |
| UNI CEN/TS 15480-4 : 2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 4: RECOMMENDATIONS FOR EUROPEAN CITIZEN CARD ISSUANCE, OPERATION AND USE |
| PD CEN/TS 15480-4:2012 | Identification card systems. European Citizen Card Recommendations for European Citizen Card issuance, operation and use |
| UNI CEN/TS 15480-5 : 2013 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 5: GENERAL INTRODUCTION |
| PD CEN/TS 15480-3:2014 | Identification card systems. European Citizen Card European Citizen Card Interoperability using an application interface |
| PD CEN/TS 15480-5:2013 | Identification card systems. European Citizen Card General Introduction |
| S.R. CEN/TS 15480-4:2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 4: RECOMMENDATIONS FOR EUROPEAN CITIZEN CARD ISSUANCE, OPERATION AND USE |
| S.R. CEN/TS 15480-3:2014 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 3: EUROPEAN CITIZEN CARD INTEROPERABILITY USING AN APPLICATION INTERFACE |
| UNI CEN/TS 15480-3 : 2014 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 3: EUROPEAN CITIZEN CARD INTEROPERABILITY USING AN APPLICATION INTERFACE |
| CEN/TS 15480-3:2014 | Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interface |
| CEN/TS 15480-5:2013 | Identification card systems - European Citizen Card - Part 5: General Introduction |
| ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| ISO/IEC 15408-3:2008 | Information technology — Security techniques — Evaluation criteria for IT security — Part 3: Security assurance components |
| ISO/IEC 7816-12:2005 | Identification cards - Integrated circuit cards — Part 12: Cards with contacts — USB electrical interface and operating procedures |
| ISO/IEC 7816-2:2007 | Identification cards — Integrated circuit cards — Part 2: Cards with contacts — Dimensions and location of the contacts |
| ISO/IEC 7816-3:2006 | Identification cards — Integrated circuit cards — Part 3: Cards with contacts — Electrical interface and transmission protocols |
| ISO/IEC 10181-2:1996 | Information technology Open Systems Interconnection Security frameworks for open systems: Authentication framework |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO/IEC 7810:2003 | Identification cards Physical characteristics |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| ISO/IEC 11770-1:2010 | Information technology Security techniques Key management Part 1: Framework |
| EN 14890-2:2008 | Application Interface for smart cards used as Secure Signature Creation Devices - Part 2: Additional Services |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 14890-1:2008 | Application Interface for smart cards used as Secure Signature Creation Devices - Part 1: Basic services |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
| ISO/IEC 10373-3:2010 | Identification cards Test methods Part 3: Integrated circuit cards with contacts and related interface devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.