CEN/TR 16184:2011
Current
The latest, up-to-date edition.
Characterization of Waste - State-of-the-art document - Analysis of eluates
15-06-2011
In the Council Decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC, the test methods are described for determining the acceptability of waste at landfills. In section 3 of the annex of this decision the following umbrella European Standards are included for the analysis of eluates:-ENV 12506 Analysis of eluates - Determination of pH, As, Ba, Cd, Cl, Co, Cr, Cr(VI), Cu, Mo, Ni, NO2, Pb, total S, SO4, V and Zn (analysis of inorganic constituents of solid waste and/or its eluate; major, minor and trace elements);- ENV 13370 Analysis of eluates - Determination of ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN, F (analysis of inorganic constituents of solid waste and/or its eluate (anions)).In 2003 both European Standards were approved and became final standards i.e. EN 12506 and EN 13370. At the moment these standards are under revision and therefore a state-of-the-art document is prepared in order to verify the following items:-Are all parameters mentioned in the decision included in these two European Standards?-Should new relevant standards (e.g. EN ISO 17294 series) be included?-Are the current analytical techniques capable of verifying the prescribed limit values with an acceptable confidence level?
Committee |
CEN/TC 444
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
UNE-CEN/TR 16184:2011 IN | Identical |
NEN NPR CEN/TR 16184 : 2011 | Identical |
S.R. CEN/TR 16184:2011 | Identical |
SIS-CEN/TR 16184:2011 | Identical |
BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
EN 16192:2011 | Characterization of waste - Analysis of eluates |
ISO 23913:2006 | Water quality — Determination of chromium(VI) — Method using flow analysis (FIA and CFA) and spectrometric detection |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
EN ISO 17294-1:2006 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General guidelines (ISO 17294-1:2004) |
EN ISO 14403:2002 | Water quality - Determination of total cyanide and free cyanide by continuous flow analysis (ISO 14403:2002) |
ISO 14402:1999 | Water quality Determination of phenol index by flow analysis (FIA and CFA) |
EN 1483:2007 | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
DIN 38405-4:1985-07 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; ANIONS (GROUP D); DETERMINATION OF FLUORIDE (D 4) |
EN ISO 11885:2009 | Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007) |
EN 27888:1993 | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
ISO 11969:1996 | Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique) |
ISO 11083:1994 | Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide |
EN ISO 10304-3:1997 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate (ISO 10304-3:1997) |
EN ISO 15586:2003 | Water quality - Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586:2003) |
EN 26777:1993 | Water quality - Determination of nitrite - Molecular absorption spectrometric method (ISO 6777:1984) |
EN 12338:1998 | Water quality - Determination of mercury - Enrichment methods by amalgamation |
EN 1484:1997 | Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
ISO 10304-3:1997 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
ISO 15682:2000 | Water quality Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection |
ISO 17852:2006 | Water quality Determination of mercury Method using atomic fluorescence spectrometry |
ISO 9965:1993 | Water quality Determination of selenium Atomic absorption spectrometric method (hydride technique) |
ISO 8288:1986 | Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods |
ISO 9297:1989 | Water quality Determination of chloride Silver nitrate titration with chromate indicator (Mohr's method) |
ISO 6777:1984 | Water quality — Determination of nitrite — Molecular absorption spectrometric method |
EN ISO 17852:2008 | Water quality - Determination of mercury - Method using atomic fluorescence spectrometry (ISO 17852:2006) |
EN ISO 23913:2009 | Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006) |
ISO 11885:2007 | Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) |
ISO 17294-1:2004 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 1: General guidelines |
ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
ISO 6703-2:1984 | Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide |
ISO 6439:1990 | Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation |
ISO 13395:1996 | Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection |
ISO 10359-1:1992 | Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water |
EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
ISO 15586:2003 | Water quality — Determination of trace elements using atomic absorption spectrometry with graphite furnace |
NEN 6604 : 2007 | WATER QUALITY - DETERMINATION OF AMMONIUM, NITRATE, NITRITE, CHLORIDE, ORTHO-PHOSPHATE, SULPHATE AND SILICATE BY A DISCRETE ANALYZER SYSTEM AND SPECTROPHOTOMETRIC DETECTION |
ISO 14403:2002 | Water quality Determination of total cyanide and free cyanide by continuous flow analysis |
ISO 9562:2004 | Water quality — Determination of adsorbable organically bound halogens (AOX) |
ISO 22743:2006 | Water quality Determination of sulfates Method by continuous flow analysis (CFA) |
EN ISO 15682:2001 | Water quality - Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection (ISO 15682:2000) |
EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
EN ISO 9562:2004 | Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004) |
ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
ISO 10523:2008 | Water quality — Determination of pH |
EN 15216:2007 | Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates |
EN ISO 11969:1996 | Water quality - Determination of arsenic - Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996) |
EN ISO 14402:1999 | Water quality - Determination of phenol index by flow analysis (FIA and CFA)(ISO 14402:1999) |
EN ISO 10304-1:2009 | Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007) |
ISO 17294-2:2016 | Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes |
EN ISO 14911:1999 | Water quality - Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography - Method for water and waste water (ISO 14911:1998) |
EN ISO 17294-2:2016 | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 2: Determination of selected elements including uranium isotopes (ISO 17294-2:2016) |
ISO 14911:1998 | Water quality — Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography — Method for water and waste water |
EN ISO 13395:1996 | Water quality - Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection (ISO 13395:1996) |
EN 1485 : 1996 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.