CEI EN 61514 : 2002
Current
The latest, up-to-date edition.
INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
Hardcopy , PDF
English - Italian
01-01-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE AND OBJECT
2 NORMATIVE REFERENCES
3 DEFINITIONS
4 GENERAL CONDITIONS FOR TESTS
5 GENERAL TESTING PROCEDURES
6 TEST PROCEDURES
7 OTHER CONSIDERATIONS
8 TEST REPORT AND DOCUMENTATION
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Describes tests designed to determine the static and dynamic performance of single-acting or double-acting analogue positioners.
| Committee |
CT 65
|
| DevelopmentNote |
Classificazione CEI 65-81. (12/2002)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61514:2000 | Identical |
| EN 61514:2002 | Identical |
| IEC 60381-1:1982 | Analogue signals for process control systems. Part 1: Direct current signals |
| EN 60382 : 93 AC 94 | ANALOGUE PNEUMATIC SIGNAL FOR PROCESS CONTROL SYSTEMS |
| IEC 61187:1993 | Electrical and electronic measuring equipment - Documentation |
| EN 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| HD 452.1 : 200S1 | ANALOGUE SIGNALS FOR PROCESS CONTROL SYSTEMS - DIRECT CURRENT SIGNALS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60382:1991 | Analogue pneumatic signal for process control systems |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| CEI 70-1 : 1980 COR 1993 | |
| IEC 61298-4:2008 | Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| EN 61187:1994/corrigendum:1995 | ELECTRICAL AND ELECTRONIC MEASURING EQUIPMENT - DOCUMENTATION |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| HD 323.2.56 : 200S1 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - DAMP HEAT, STEADY STATE, PRIMARILY FOR EQUIPMENT |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
| IEC 60068-2-56:1988 | Environmental testing - Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.