CEI 23-50 : 2007
Current
The latest, up-to-date edition.
PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS
Hardcopy , PDF
Italian
01-01-2007
FASC 8764 La presente Norma si applica alle spine, alle prese fisse o mobili ed ai cordoni prolungatori per sola corrente alternata, con o senza contatto di terra, con tensione nominale superiore a 50 V, ma non superiore a 440 V e con corrente nominale non superiore a 32 A, destinate agli usi domestici e similari sia all'interno sia all'esterno. La corrente nominale è limitata ad un massimo di 16 A per le prese fisse con morsetti senza vite. La presente Norma si applica anche alle spine collegate ai cordoni per connettore, alle spine ed alle prese mobili collegate ai cordoni prolungatori. Essa si applica inoltre alle spine ed alle prese che sono componenti di un apparecchio utilizzatore, a meno che non sia diversamente specificato nelle relative Norme dell'apparecchio utilizzatore. In particolare, la presente Norma si applica agli adattatori con le prescrizioni aggiuntive della Norma CEI 23-57. La presente Norma si applica anche alle scatole per l'installazione di apparecchi il cui involucro è parte integrante degli stessi. Prescrizioni per le scatole da incasso e per le scatole che non sono parte integrante dell'apparecchio sono contenute nella Norma CEI EN 60670-1. La presente Norma non si applica a: spine non smontabili bipolari 2,5 A 250 V per apparecchi di classe II, le prescrizioni delle quali contenute nella presente Norma sono sostituite da quelle della Norma CEI EN 50075; spine e prese per uso industriale; connettori; spine, prese fisse e mobili per Bassissima Tensione di Sicurezza; prese fisse combinate con fusibili, interruttori automatici ecc.
Committee |
CT 23
|
DevelopmentNote |
Supersedes CEI 23-16, CEI 23-16 V1, CEI 23-16 V2, CEI 23-16 V3, CEI 23-16 V4, CEI 23-16 V5, CEI 23-16 V6, CEI 23-5, CEI 23-5 V2 and CEI 23-5 V3. (03/2004)
|
DocumentType |
Standard
|
Pages |
144
|
PublisherName |
Comitato Elettrotecnico Italiano
|
Status |
Current
|
Supersedes |
Standards | Relationship |
IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Identical |
CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
CEI 23-124 : 2012 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-7: PARTICULAR REQUIREMENTS FOR CORD EXTENSION SETS |
CEI 64-8/7 : 2012 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS |
CEI EN 60335-2-106 : 2008 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-106: PARTICULAR REQUIREMENTS FOR HEATED CARPETS AND FOR HEATING UNITS FOR ROOM HEATING INSTALLED UNDER REMOVABLE FLOOR COVERINGS |
CEI 23-95 : 2010 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS) |
CEI 23-97 : 2010 | SOCKET-OUTLETS INTERLOCKED WITH A CIRCUIT BREAKER FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PIA) |
CEI EN 60799 : 1999 | ELECTRICAL ACCESSORIES CORD SETS AND INTERCONNECTION CORD SETS |
CEI EN 60601-1-1 : 2003 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-1: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: SAFETY REQUIREMENTS FOR MEDICAL ELECTRICAL SYSTEMS |
CEI 64-8/5 : 2012 | LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 5: ERECTION AND SELECTION OF ELECTRICAL EQUIPMENT |
CEI 23-123 : 2012 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-6: PARTICULAR REQUIREMENTS FOR SWITCHED SOCKET-OUTLETS WITH INTERLOCK FOR FIXED INSTALLATIONS |
CEI 23-96 : 2010 | SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID) |
CEI EN 60352-7 : 2003 | SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60884-2-6:1997 | Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations |
IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 60050-442:1998 | International Electrotechnical Vocabulary (IEV) - Part 442: Electrical accessories |
ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
IEC 60417-2:1998 | Graphical symbols for use on equipment - Part 2: Symbol originals |
IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
CEI 70-1 : 1980 COR 1993 | |
ISO 1639:1974 | Wrought copper alloys Extruded sections Mechanical properties |
CEI 15-18 : 1ED 1997 | METODO PER LA DETERMINAZIONE DEGLI INDICI DI RESISTENZA E DI TENUTA ALLA TRACCIA DEI MATERIALI ISOLANTI SOLIDI IN CONDIZIONI UMIDE |
IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
CEI 23-26 : 1ED 1988 | DIAMETRI ESTERNI DEI TUBI PER INSTALLAZIONI ELETTRICHE E FILETTATURE PER TUBI E ACCESSORI |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.