CAN/CSA-E1029-2-7-94 (R2017)
Current
The latest, up-to-date edition.
Safety of Transportable Motor-Operated Electric Tools - Part 2: Particular Requirements for Diamond Saws With Water Supply (Adopted IEC 1029-2-7:1993, first edition) | Sécurité des machines-outils électriques semi-fixes - Partie 2: Règles particulières pour les tronçonneuses à béton (norme CEI 1029-2-7:1993 adoptée, première édition)
Hardcopy , PDF
English - French
01-01-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Definitions
3 General requirement
4 General notes on tests
5 Rating
6 Classification
7 Marking
8 Protection against electric shock
9 Starting
10 Input and current
11 Heating
12 Leakage current
13 Radio and television interference suppression
14 Protection against ingress of foreign bodies and
moisture resistance
15 Insulation resistance and electric strength
16 Endurance
17 Abnormal operation
18 Stability and mechanical hazards
19 Mechanical strength
20 Construction
21 Internal wiring
22 Components
23 Supply connection and external flexible cables and
cords
24 Terminals for external conductors
25 Provision for earthing
26 Screws and connections
27 Creepage distances, clearances and distances through
insulation
28 Resistance to heat, fire and tracking
29 Resistance to rusting
30 Radiation
Annexes
Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable diamond saws with water supply and with a saw blade diameter of not more than 250 mm. NOTES (1) For tools having saw blades with a diameter of more than 250 mm, additional requirements are under consideration. (2) This Standard does not cover bench-type diamond saws. (3) This Standard does not cover diamond saws not guided by a track. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Domaine d’application L\'article de la première partie est applicable avec l\'exception suivante: 1.1 Modification: Remplacer le premier alinéa par: La présente Norme internationale s\'applique aux tronçonneuses à béton semi-fixes avec alimentation d\'eau équipées d\'une lame d\'un diamètre ne dépassant pas 250 mm. NOTES (1) Pour les machines équipées d\'une lame d\'un diamètre supérieur à 250 mm, des prescriptions complémentaires sont à l\'étude. (2) La présente norme ne s\'applique pas aux tronçonneuses d\'établi. (3) La présente norme ne s\'applique pas aux tronçonneuses non guidées par glissière.
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Current
|
Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable diamond saws with water supply and with a saw blade diameter of not more than 250 mm. NOTES (1) For tools having saw blades with a diameter of more than 250 mm, additional requirements are under consideration. (2) This Standard does not cover bench-type diamond saws. (3) This Standard does not cover diamond saws not guided by a track. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Domaine d’application L\'article de la première partie est applicable avec l\'exception suivante: 1.1 Modification: Remplacer le premier alinéa par: La présente Norme internationale s\'applique aux tronçonneuses à béton semi-fixes avec alimentation d\'eau équipées d\'une lame d\'un diamètre ne dépassant pas 250 mm. NOTES (1) Pour les machines équipées d\'une lame d\'un diamètre supérieur à 250 mm, des prescriptions complémentaires sont à l\'étude. (2) La présente norme ne s\'applique pas aux tronçonneuses d\'établi. (3) La présente norme ne s\'applique pas aux tronçonneuses non guidées par glissière.
| Standards | Relationship |
| IEC 61029-2-7:1993 | Identical |
| CSA DIR 005.1 : 1997 | LIST OF CSA CERTIFIED WIRE AND CABLE EQUIPMENT |
| CSA DIR 005.8 : 1997 | LIST OF CSA CERTIFIED CONTROL, REGULATING AND SIGNAL EQUIPMENT |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| CSA C22.1EP : 1998 | WHAT'S NEW IN 98: CHANGES TO CE CODE, PART 1, EXPLAINED |
| CSA DIR 005.7 : 1997 | LIST OF CSA CERTIFIED BUSINESS AND TELECOMMUNICATION EQUIPMENT |
| ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
| CSA DIR 005.2 : 1997 | LIST OF CSA CERTIFIED ELECTRICALLY EQUIPPED CONSUMER AND COMMERCIAL PRODUCTS |
| CSA PLUS 2204 : 1993 | ELECTRICAL PLUS: A GUIDE TO CSA ELECTRICAL AND ELECTRONIC STANDARDS |
| CSA DIR 005.6 : 1997 | LIST OF CSA CERTIFIED POWER SUPPLIES AND TRANSFORMERS |
| C22.1HB-15 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| CSA B44S1 : 0 | SUPPLEMENT NO. 1 TO B44-04, SAFETY CODE FOR ELEVATORS AND ESCALATORS |
| CSA DIR 010 : 1998 | COMPONENT ACCEPTANCE DIRECTORY - PLASTICS PROGRAM |
| CSA DIR 005.4 : 1997 | LIST OF CSA CERTIFIED HOME AND COMMERCIAL ENTERTAINMENT PRODUCTS |
| CSA DIR 005.5 : 1997 | LIST OF CSA CERTIFIED LIGHTING EQUIPMENT AND PRODUCTS |
| CSA DIR 005.3 : 1997 | LIST OF CSA CERTIFIED ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS |
| CSA PLUS 2203 : 2001 | HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES |
| CSA DIR 005.9 : 1997 | LIST OF CSA CERTIFIED INDUSTRIAL PRODUCTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.