C22.2 NO. 243-17
Current
The latest, up-to-date edition.
Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
Hardcopy , PDF
English
01-01-2017
PREFACE
1 Scope
2 General
3 Definitions
4 Construction
5 Tests
6 Double Insulation
7 Rechargeable Battery-Powered Appliances
8 Current-carrying hoses and accessory electrified
wall valves
9 Appliances Generating Ultraviolet (UV) Radiation
10 Manufacturing and Production Tests
11 Marking
12 Instruction Manual
ANNEX A (Normative)
ANNEX B (Normative) - Tab Terminals
ANNEX C (Normative)
ANNEX D (Informative) - Secondary Circuits and the Level
of Evaluation Required
ANNEX E (Informative)
ANNEX F (Informative)
ANNEX G (Informative) - Methods of Applying ISO 13849-1
to Appliances
ANNEX H - French Language Markings - This ANNEX is
provided for information only
Pertains to motor-operated vacuum cleaners and blower cleaners, floor sweepers, and to household use floor finishing machines to be employed in accordance with C22.1, C22.2 No. 0, and ANSI/NFPA 70.
DevelopmentNote |
Also numbered as UL 1017. (05/2002)
|
DocumentType |
Standard
|
ISBN |
978-1-4883-0865-9
|
Pages |
0
|
PublisherName |
Canadian Standards Association
|
Status |
Current
|
Supersedes |
Perface This is the harmonized CSA Group, and UL standard for Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines. It is the sixth edition of CSA C22.2 No. 243, and the tenth edition of UL 1017. This edition of CSA C22.2 No. 243 supersedes the previous edition(s) published in 2015. This edition of UL 1017 supersedes the previous edition(s) published in 2015. Scope 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, floor sweepers, and to household use floor finishing machines to be employed in accordance with C22.1, C22.2 No. 0, and ANSI/NFPA 70. 1.2 These requirements cover: a) Household, commercial, and coin-operated vacuum cleaning machines and blower cleaners, intended for indoor or outdoor use or both; b) Household, commercial, and coin-operated wet pick-up, dry pick-up, permanently mounted, portable, and central vacuum cleaners and blower cleaner systems; c) Household electrically powered floor finishing machines, including floor polishers, floor scrubbers, floor sanders, rug shampooers, rug and floor washers, and similar machines; d) Appliances covered by this Standard that are marked as being provided with double insulation and that employ double insulation in place of grounding in accordance with the Exception to Clause 4.16.1; e) Portable rechargeable battery-powered appliances for indoor or outdoor use with rechargeable non-user and user-replaceable batteries; see Clause 7; f) Current-carrying hoses for use with vacuum cleaner/motorized nozzle combination appliances intended for household, dry pick-up, indoor use; see Clause 8; g) Current-carrying hoses for use with motorized nozzles intended for use with central vacuum cleaning systems intended for household, dry pick-up, indoor use; see Clause 8; h) Wet pick-up current-carrying hoses for use with household, indoor use carpet cleaning equipment; see Clause 8; i) Grounded current-carrying hoses for use with motorized nozzles intended for household indoor use; see Clause 8; j) Electrified wall valves for connection of current-carrying hose/motorized nozzle combinations for central vacuum cleaning systems intended for household use; see Clause 8; k) Household, indoor use, wet/dry vacuum cleaning machines with a steam-cleaning attachment (such as a vacuum provided with a steam generator in the nozzle), where the vacuum is the prominent feature of the appliance as evidenced by the electrical rating of the vacuum function being greater than the electrical rating of the steam-cleaning function; see also Clause 2.3.3. A steam cleaner provided with a vacuum attachment, where the steam-cleaning function is the prominent feature, is covered under the requirements of C22.2 No. 64 and UL 499; and l) Household and commercial floor sweepers. m) Vacuum cleaners intended for installation in recreational vehicles (R/V) or marine vessels; n) Appliances powered through a vehicle battery adapter. 1.3 These requirements do not cover appliances rated more than 250 V. An appliance that utilizes some other source of energy, such as gas or steam, in addition to electric energy is to be investigated under these requirements and under such additional requirements as are applicable to the appliance under consideration. 1.4 These requirements do not cover appliances for use in locations such as those areas of hospitals, laboratories, institutions, and the like where dispersion of pathological, chemical, physical, radioactive or other agents could produce a risk to health. Appliances intended for use in such locations are investigated under these requirements and under such additional requirements as are applicable to the appliance, with appropriate consideration being given to the specific intended use. 1.5 These requirements apply only to a specific type or types of appliances, such as a vacuum cleaner or floor finishing machine, if the requirement is so identified by specific reference to the type or types involved. Absence of such specific reference or use of the term \"appliance\" indicates that the requirement applies to all appliances covered by this standard. 1.6 Internal-combustion engine powered floor cleaning machines for industrial/commercial use, such as floor buffers, scrubbers, sweepers, extractors, and polishers, are covered under UL 558. 1.7 These requirements do not cover machines that generate pressure in excess of 2.5 MPa (360 psi).
CAN/CSA-C22.2 NO. 60335-2-72:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE |
CSA C22.2 No. 147 : 2015 | MOTOR-OPERATED GARDENING APPLIANCES |
UL 60335-2-67:1ED 2017-12-22 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
UL 60335-2-72:1ED 2017-09-15 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
CSA C22.2 No. 60335-2-67 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE |
CSA C22.2 No. 38 : 2014 | THERMOSET-INSULATED WIRES AND CABLES |
UL 1699:3ED 2017-05-03 | Arc-Fault Circuit-Interrupters |
ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
IES RP 27.1 : 2015 | RECOMMENDED PRACTICE FOR PHOTOBIOLOGICAL SAFETY FOR LAMPS AND LAMP SYSTEMS - GENERAL REQUIREMENTS |
UL 514A:11ED 2013-02-01 | Metallic Outlet Boxes |
CSA C22.2 No. 223 : 2015 | POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS |
UL 1439:5ED 2015-04-21 | Tests for Sharpness of Edges on Equipment |
CSA C22.2 No. 5 : 2013 | MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES |
UL 5085-3:1ED 2006-04-17 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
CSA C22.2 No. 1 : 2004 | AUDIO, VIDEO AND SIMILAR ELECTRONIC EQUIPMENT |
CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
CSA C22.2 No. 77 : 2014 | MOTORS WITH INHERENT OVERHEATING PROTECTION |
CSA C22.2 No. 0.4 : 2004(R2013) | BONDING OF ELECTRICAL EQUIPMENT |
ISO/IEC 28360:2015 | Information technology Office equipment Determination of chemical emission rates from electronic equipment |
CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
UL 1283:7ED 2017-05-17 | Electromagnetic Interference Filters |
CSA C22.2 No. 24 : 2015 | TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT |
UL 935:10ED 2001-05-21 | Fluorescent-Lamp Ballasts |
UL 83:16ED 2017-07-28 | Standard for Thermoplastic-Insulated Wires and Cables |
UL 514D:2ED 2013-06-28 | Cover Plates for Flush-Mounted Wiring Devices |
CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
CSA C22.2 No. 0.2 : 2016 | INSULATION COORDINATION |
IES RP 27.3 : 2007 | PHOTOBIOLOGICAL SAFETY FOR LAMPS AND LAMP SYSTEMS - RISK GROUP CLASSIFICATION AND LABELING |
UL 943:5ED 2016-05-17 | Ground-Fault Circuit-Interrupters |
C22.2 NO. 43-17 | Lampholders (Binational standard with UL 496) |
UL 635:3ED 2012-03-08 | Insulating Bushings |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ASTM F 655 : 2013 : REDLINE | Standard Specification for Test Carpets and Pads for Vacuum Cleaner Testing (Withdrawn 2022) |
UL 60730-2-9:4ED 2017-02-14 | Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
UL 514C:4ED 2014-04-08 | Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
CSA C22.2 No. 190 : 2014 | CAPACITORS FOR POWER FACTOR CORRECTION |
CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
UL 101:6ED 2017-07-31 | Leakage Current for Utilization Equipment |
CSA C22.2 No. 188 : 2013 | SPLICING WIRE CONNECTORS |
CSA E60730.1 : 2015 | Automatic electrical controls for household and similar use — Part 1: General requirements |
UL 499:14ED 2014-11-07 | Electric Heating Appliances |
NEMA WD 6 : 2016 | WIRING DEVICES - DIMENSIONAL SPECIFICATIONS |
CSA C22.2 No. 0.15 : 2015 | ADHESIVE LABELS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
C22.2 NO. 8-13 (R2018) | Electromagnetic interference (EMI) filters |
ISO 16000-9:2006 | Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
CSA C22.2 No. 210 : 2015 | APPLIANCE WIRING MATERIAL PRODUCTS |
CSA C22.2 No. 127 : 2015 | EQUIPMENT AND LEAD WIRES |
CSA C22.2 No. 182.3 : 2016 | SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS |
C22.2 NO. 75-17 | Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017) |
CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
UL 60730-1:5ED 2016-08-03 | Automatic Electrical Controls - Part 1: General Requirements |
CSA C22.2 No. 107.1 : 2016 | POWER CONVERSION EQUIPMENT |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
UL 1577:5ED 2014-04-25 | Optical Isolators |
UL 1004-2:2ED 2014-01-10 | Impedance Protected Motors |
CSA C22.2 No. 55 : 2015 | SPECIAL USE SWITCHES |
C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
UL 496:14ED 2017-09-05 | Lampholders |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
CSA C22.2 No. 144.1 : 2016 | GROUND-FAULT CIRCUIT-INTERRUPTERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.