BS PD8010-1(2015) : 2015
Current
Current
The latest, up-to-date edition.
PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Health, safety and assurance
5 Design - System and safety
6 Design - Mechanical integrity
7 Design - Stations and terminals
8 Design - Materials and coatings
9 Design - Corrosion management
10 Construction - Fabrication and installation
11 Construction - Testing
12 Pre-commissioning and commissioning
13 Operation, maintenance and integrity assurance
management
14 Abandonment
Annexes
Annex A (informative) - Extent of pipeline systems for
conveying oil and gas that are covered by this part
of PD 8010
Annex B (normative) - Quality assurance
Annex C (normative) - Records and document control
Annex D (informative) - Hazards in pipeline design
Annex E (normative) - Safety evaluation of pipelines
Annex F (normative) - Pipeline route selection
Annex G (normative) - Loads
Annex H (informative) - Buckling
Annex I (informative) - Planning and legal
Bibliography
Defines recommendations for and guidance on the design, selection, specification and use of materials, routeing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel.
| Committee |
PSE/17/2
|
| DevelopmentNote |
Supersedes BS PD8010-1(2004) & 14/30286897 DC. (03/2015) Supersedes 16/30344659 DC. 2015 Edition Re-Issued in November 2016 & incorporates AMD 1 2016. (11/2016)
|
| DocumentType |
Standard
|
| Pages |
174
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| BS ISO 7005-1:2011 | Pipe flanges Steel flanges for industrial and general service piping systems |
| BS EN ISO 148-1:2016 | Metallic materials. Charpy pendulum impact test Test method |
| BS EN ISO 9004:2009 | Managing for the sustained success of an organization. A quality management approach |
| BS 5607:1998 | Code of practice for the safe use of explosives in the construction industry |
| DIN 30670:2012-04 | Polyethylene coatings on steel pipes and fittings - Requirements and testing |
| BS EN ISO 9001:2015 | Quality management systems. Requirements |
| ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
| PD 8010-5:2013 | Pipeline systems Subsea pipelines. Guide to operational practice |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| API 5LC : 2015 | CRA LINE PIPE |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 21467:2004 | Earth-moving machinery — Horizontal directional drills — Terminology and specifications |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| BS EN 10217-2 : 2002 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| BS EN ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables |
| ASME B31.3:2016 | PROCESS PIPING |
| BS 3618-3:1971 | Glossary of mining terms Boring and exploration |
| BS ISO 10474:2013 | Steel and steel products. Inspection documents |
| BS 5949:1980 | Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking |
| BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials. General rules |
| BS EN ISO 15653:2010 | Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds |
| BS EN 60079-10-1:2015 | Explosive atmospheres Classification of areas. Explosive gas atmospheres |
| BS EN ISO 9606-1:2017 | Qualification testing of welders. Fusion welding Steels |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| BS EN ISO 3183 : 2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| API 5L : 2012 | LINE PIPE |
| BS EN ISO 14001:2015 | Environmental management systems. Requirements with guidance for use |
| ISO 15590-3:2004 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
| PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
| BS EN 13480-3:2017 | Metallic industrial piping Design and calculation |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| BS 6100-3:2007 | Building and civil engineering. Vocabulary Civil engineering. General |
| BS EN 1594:2013 | Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| ISO 15589-1:2015 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines |
| BS EN 12336 : 2005 | TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| BS ISO 1143:2010 | Metallic materials. Rotating bar bending fatigue testing |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| ISO 15590-2:2003 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
| BS ISO 15649:2001 | Petroleum and natural gas industries. Piping |
| BS EN 10217-5:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| BS EN ISO 16708:2006 | Petroleum and natural gas industries. Pipeline transportation systems. Reliability-based limit state methods |
| MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
| BS 3518-3:1963 | Methods of fatigue testing Direct stress fatigue tests |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| BS EN 10216-1:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| BS EN ISO 80000-1:2013 | Quantities and units General |
| BS 3618-8:1974 | Glossary of mining terms Winning and working |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| BS EN 14161 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| BS EN 10217-1:2002 | Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
| BS 6164:2011 | Code of practice for health and safety in tunnelling in the construction industry |
| BS PD8010-3(2009) : 2009 | PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004 |
| BS 3293:1960 | Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
| BS 4515-2:1999 | Specification for welding of steel pipelines on land and offshore Duplex stainless steel pipelines |
| BS ISO 12107:2003 | Metallic materials. Fatigue testing. Statistical planning and analysis of data |
| BS 5911-120:1989 | Precast concrete pipes, fittings and ancillary products Specification for reinforced jacking pipes with flexible joints |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| BS EN 10216-2:2013 | Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
| BS EN ISO 9000:2015 | Quality management systems. Fundamentals and vocabulary |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
| BS EN ISO 21809-2:2014 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| BS EN 10204:2004 | Metallic products. Types of inspection documents |
| API 5LD : 2017 | CRA CLAD OR LINED STEEL PIPE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.