BS PD IEC TS 60079-32-1 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
Available format(s)
Hardcopy , PDF
Superseded date
31-05-2015
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Nomenclature
5 General
6 Static electricity in solid materials
7 Static electricity in liquids
8 Static electricity in gases
9 Static electricity in powders
10 Static electricity when handling explosives and electro-explosive
devices
11 Static electricity on people
12 Electrostatic shock
13 Earthing and bonding
Annex A (informative) - Fundamentals of static electricity
Annex B (informative) - Electrostatic discharges in specific situations
Annex C (informative) - Flammability properties of substances
Annex D (informative) - Classification of hazardous areas
Annex E (informative) - Classification of equipment protection level
Annex F (informative) - Flow chart for a systematic electrostatic
evaluation
Annex G (informative) - Tests
Bibliography
Provides guidance about the equipment, product and process properties necessary to avoid ignition and electrostatic shock hazards arising from static electricity as well as the operational requirements needed to ensure safe use of the equipment, product or process.
| Committee |
EXL/31
|
| DevelopmentNote |
Renumbered & superseded by BS PD CLC/TR 60079-32-1. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
176
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| BS 7506-2:1996 | Methods for measurement in electrostatics Test methods |
| DIN 51412-1:2005-06 | Testing of petroleum products - Determination of electrical conductivity - Part 1: Laboratory method |
| ISO 21179:2013 | Light conveyor belts — Determination of the electrostatic field generated by a running light conveyor belt |
| ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
| ISO 21183-1:2005 | Light conveyor belts Part 1: Principal characteristics and applications |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| IEC 61340-4-4:2012+AMD1:2014 CSV | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC) |
| IEC 61340-4-7:2017 | Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization |
| ISO 13688:2013 | Protective clothing — General requirements |
| EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
| EN 14973:2015 | Conveyor belts for use in underground installations - Electrical and flammability safety requirements |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| IEC 61340-2-3:2016 | Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation |
| EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| IEC 60079-20-1:2010 | Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data |
| EN 50050:2006 | Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment |
| DIN 51412-2:2013-01 | TESTING OF PETROLEUM PRODUCTS - DETERMINATION OF THE ELECTRICAL CONDUCTIVITY - PART 2: FIELD METHOD |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| IEC 60167:1964 | Methods of test for the determination of the insulation resistance of solid insulating materials |
| EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| SAE J 1645 : 2011 | FUEL SYSTEMS AND COMPONENTS - ELECTROSTATIC CHARGE MITIGATION |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| IEC 61340-4-3:2001 | Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear |
| ISO 6297:1997 | Petroleum products — Aviation and distillate fuels — Determination of electrical conductivity |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| IEC 61340-4-1:2003+AMD1:2015 CSV | Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
| ISO 16392:2017 | Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig |
| ISO 8028:1999 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying Specification |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 61340-2-1:2015 | Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge |
| EN 50059:1990 | Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing |
| EN 1149-2:1997 | Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| IEC 61340-4-5:2004 | Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| ISO 21178:2013 | Light conveyor belts Determination of electrical resistances |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ISO 20345:2011 | Personal protective equipment Safety footwear |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| IEC 60243-2:2013 | Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| DIN 54345-5:1985-07 | TESTING OF TEXTILES; ELECTROSTATIC BEHAVIOUR; DETERMINATION OF ELECTRICAL RESISTANCE OF STRIPS OF TEXTILE FABRICS |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| IEC TR 61340-1:2012 | Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EN 13821:2002 | Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 20344:2011 | Personal protective equipment Test methods for footwear |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| EN 1149-3:2004 | Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.