BS ISO/IEC 18000-7:2014
Current
The latest, up-to-date edition.
Information technology. Radio frequency identification for item management Parameters for active air interface communications at 433 MHz
Hardcopy , PDF
English
30-09-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Terms and definitions
5 Symbols and abbreviated terms
6 433,92 MHz active narrowband specification
7 Extended Mode
Annex A (normative) - Co-existence of different
application standards based on ISO/IEC 18000-7
Annex B (informative) - Derivation of Session Key
K[S] Using SHA-1
Annex C (informative) - Overview of PKI and Digital
Certificates
Annex D (normative) - Implementation of ISO/IEC/IEEE 21451-7
Sensors into ISO/IEC 18000-7
Annex E (informative) - Example of ISO 15962, 6-bit Encoded
Data on an ISO/IEC 18000-7 Tag
Bibliography
Describes the air interface for radio frequency identification (RFID) devices operating as an active RF Tag in the 433 MHz band used in item management applications.
| Committee |
IST/34
|
| DevelopmentNote |
Supersedes 06/30143670 DC. (02/2008) Supersedes 12/30253654 DC. (09/2014)
|
| DocumentType |
Standard
|
| Pages |
214
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO/IEC18000 defines the air interface for radio frequency identification (RFID) devices operating as an active RF tag in the 433 MHz band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO technical committees developing RFID application standards. This part of ISO/IEC18000 is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. This part of ISO/IEC18000 defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum power, spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. This part of ISO/IEC18000 further defines the communications protocol used in the air interface.
| Standards | Relationship |
| ISO/IEC 18000-7:2014 | Identical |
| ISO/IEC TR 18001:2004 | Information technology Radio frequency identification for item management Application requirements profiles |
| ISO 18185-3:2015 | Freight containers Electronic seals Part 3: Environmental characteristics |
| ISO/IEC 8859-1:1998 | Information technology 8-bit single-byte coded graphic character sets Part 1: Latin alphabet No. 1 |
| ISO/IEC TR 18047-7:2010 | Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz |
| ISO 18185-4:2007 | Freight containers Electronic seals Part 4: Data protection |
| ISO/IEC 18046:2006 | Information technology Automatic identification and data capture techniques Radio frequency identification device performance test methods |
| ISO/IEC 19762-3:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) |
| ISO 17363:2013 | Supply chain applications of RFID Freight containers |
| ISO/IEC 15963:2009 | Information technology Radio frequency identification for item management Unique identification for RF tags |
| IEEE 802.15.4f-2012 | LOCAL AND METROPOLITAN AREA NETWORKS - PART 15.4: LOW-RATE WIRELESS PERSONAL AREA NETWORKS (LR-WPANS) - AMENDMENT 2: ACTIVE RADIO FREQUENCY IDENTIFICATION (RFID) SYSTEM PHYSICAL LAYER (PHY) |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO/IEC 19762-1:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC |
| ISO 18185-1:2007 | Freight containers Electronic seals Part 1: Communication protocol |
| IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| ISO 18185-5:2007 | Freight containers Electronic seals Part 5: Physical layer |
| IEC 62369-1:2008 | Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz - Part 1: Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems |
| IEEE 1451.7-2010 | IEEE Standard for Smart Transducer Interface for Sensors and Actuators--Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats |
| ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
| ISO 18185-2:2007 | Freight containers Electronic seals Part 2: Application requirements |
| IEEE 802.15.4E : 2012 | LOCAL AND METROPOLITAN AREA NETWORKS - PART 15.4: LOW-RATE WIRELESS PERSONAL AREA NETWORKS (LR-WPANS) - AMENDMENT 1: MAC SUBLAYER |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.