BS ISO 6395:2008
Current
The latest, up-to-date edition.
Earth-moving machinery. Determination of sound power level. Dynamic test conditions
Hardcopy , PDF
English
31-03-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Instrumentation
5 Test environment
5.1 General
5.2 Test site and environmental correction, K[2A]
5.3 Test site
5.4 Background noise correction, K[1A]
5.5 Climatic condition
6 Measurement of time-averaged A-weighted sound
pressure levels
6.1 Size of measurement surface
6.2 Microphone positions on the hemispherical
measurement surface
6.3 Positioning the machine
7 Set-up and operation of machine
7.1 General
7.2 Engine speed
7.3 Fan speed
7.4 Travel mode operation of machine
8 Determination of A-weighted sound power level
8.1 Measurement procedure
8.2 Calculation of A-weighted sound power level
8.3 Determination of measurement result
9 Information to be recorded
10 Information to be reported
10.1 Information
10.2 Declaration of sound emission data and uncertainty
Annex A (normative) - Basic length, l, and additional
machine specifications
Annex B (normative) - Excavators (hydraulic or cable-operated)
Annex C (normative) - Dozers
Annex D (normative) - Loaders
Annex E (normative) - Backhoe loaders
Annex F (normative) - Dumpers
Annex G (normative) - Graders
Annex H (normative) - Landfill compactors
Annex I (normative) - Trenchers
Annex J (normative) - Scrapers
Annex K (normative) - Pipelayers
Annex L (normative) - Ride-on operated rollers
Annex M (informative) - Additional guidelines for measurement
of A-weighted sound power level of earth-moving
machinery - Dynamic test conditions
Annex N (normative) - Declaration of sound emission
data and uncertainty
Bibliography
Describes a method for determining the noise emitted to the environment by earth-moving machinery, measured in terms of the A-weighted sound power level while the machine is operating under dynamic test conditions.
| Committee |
B/513/1
|
| DevelopmentNote |
Supersedes BS 6812-3(1991) & 04/30111138 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies a method for determining the noise emitted to the environment by earth-moving machinery, measured in terms of the A-weighted sound power level while the machine is operating under dynamic test conditions.
It is applicable to earth-moving machinery as specified in AnnexA and as defined in ISO6165.
| Standards | Relationship |
| ISO 6395:2008 | Identical |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 6396:2008 | Earth-moving machinery Determination of emission sound pressure level at operator's position Dynamic test conditions |
| ISO 6165:2012 | Earth-moving machinery — Basic types — Identification and terms and definitions |
| ISO 6393:2008 | Earth-moving machinery Determination of sound power level Stationary test conditions |
| ISO 6394:2008 | Earth-moving machinery Determination of emission sound pressure level at operator's position Stationary test conditions |
| ISO 9249:2007 | Earth-moving machinery — Engine test code — Net power |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.